GE/ALP(8201B) KOLKATA OF 2023-24

Amount

M&L for complete removal of existing treatment of old decorated wall surfaces etc complete all as specified and directed (Work shall be carried out upto 8 storey bldg.)

M&L for 1mm thick wall care putty on old decorated walls surfaces complete all as specified and directed (Work shall be carried out upto 8 storey bldg.)

M&L for preparation of plastered and unplastered surfaces of old decorated walls, applying one coat of acrylic oil emulsion distemper complete all as specified and directed (Work shall be carried out upto 8 storey bldg.)

M&L for complete removal of existing treatment of old decorated ceiling surfaces complete all as specified and directed (Work shall be carried out upto 8 storey bldg.)

M&L for 1mm thick wall care putty on old decorated ceiling surfaces complete all as specified and directed (Work shall be carried out upto 8 storey bldg.)

M&L for preparation of plastered and unplastered surfaces of old decorated ceiling applying one coat of acrylic oil emulsion distemper complete all as specified and directed (Work shall be carried out upto 8 storey bldg.)

M&L for one coat of weather proof exterior emulsion paint on old decorated surface of any description, complete all as specified and as directed (Work shall be carried out upto 8 storey bldg.)

M&L for one coat of synthetic enamelled paint on old decorated Steel surface exc 10cm width or girth including preparation complete all as specified and as directed (upto 8 storey bldg.)

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed.(Work shall be carried out upto 8 storey bldg.)

M&L for 15mm thick plastering on fair faces of ceiling surfaces in CM (1:4) surface finished even and fair complete all as specified and directed.(Work shall be carried out upto 8 storey bldg.)

M&L for 15mm thick plastering on other than fair faces of brick wall and concrete surfaces in CM (1:6) surface finished even and fair complete all as specified and directed.(upto 8 storey bldg.)

M&L for Rendering on ceiling 5 mm thick in cement mortar (1:3) on of concrete surface finished even and smooth with out using extra cement complete all as specified and directed.

M&L for two coats cement base paint over a coat of primer on newly plastered surface including preparation of surface, complete all as specified and directed(upto 8 storey bldg.)

M&L for preparing surfaces new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and applying two coat of acrylic distemper with wall care putty complete all as specified and as directed.(upto 8 storey bldg.)

M&L for preparing new decorated plastered or unplastered surfaces of ceiling, pillasters, cornices etc and applying coat of 1.0 mm thick wall care putty with two coat acrylic distemper complete all as specified and directed.(Work shall be carried out upto 8 storey bldg.)

M&L for textured painting (granular or impression) type colour in any position with machine and rolling brush incl a two of plastic emusion paint any colour complete all as specified and directed.(Work shall be carried out upto 8 storey bldg.)

Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc laid, bedded & pointed in any mortar complete in all respect as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including over 20 mm thick screed bed in CM (1:6) all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type 'B-0' using 12.5 mm graded crushed stone aggregate as in sub base complete all as specified and directed.

Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified & directed.

S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete in all respect as specified and directed.

S&F 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete in all respect as specified and directed.

S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete in all respect as specified and directed.

S&F PVC (SWR) 110 mm bore junction double, (double T) equal or unequal complete in all respect as specified and directed.

S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe etc. comlete all as specified and directed.(Make : Prayag or equivelant as approved by GE )

Supply PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approved by GE complete all as specified & directed.

S&F in repairs vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & PTMT waste coupling of 32mm dia complete all as specified and directed.

S&F in repairs Brass chromium plated bottle traps of 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed.

S&F 15mm bore in repairs CP angular valve with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size comlete all as specified and directed.

S & F 15 mm Dia in repairs CP Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S & F in repairs 15 mm Dia CP stop cock , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .

S&F 15 mm bore pillar taps, Chromium Plated, with capstan heads, chromium plated, screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing of rotational moulded polythene water storage tank 1000 litre capacity ISI marked (cylindrical, vertical, double layered with closed top) hoisted and fixed in position including PVC float valve 20mm bore weight not less than 210gms. Complete all as specified and directed.

Dismantling of old unserviceable water tank, removing from site, Supply and fixing 2000 Litre capacity rotational moulded polyethylene water storage tanks (multilayer.cylindrical vertical with closed top) with and including 50 mm dia PVC float valve hoisted and fixed in position complete in all respect as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.all as specified and directed.

Material and labour in repair for point wiring for Modular fitting, for one light/fan/call bell point with 1.5 sqmm PVC insulated FRLSH unsheathed copper cable multistranded conductor 1100 volts grade, concealed type, controlled by one way switch including 1.5 sqmm PVC FRLSH insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through non metallic rigid PVC heavy duty concealed conduit of size 25mm dia with wall thickness not less than 1.6 mm including conduit accessories like bends, tees junction boxes, etc including 1.5 Sq mm, single core PVC insulated unsheathed multi stranded copper conductor FRLSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of modular switches, sockets, complete after and making good the distrubed surfaces as per the existing complete all as specified and as directed.

All as per item No 37 here-in-before but for one light point controlled by two way switch completeall as specified and directed.

All as per item No 37 here-in-before but for 3 pin 6 Amps socket modular type on the same board with 1.5 sqmm cable complete all as specified and directed.

All as per item No 37 here-in-before but for 3 pin 6 Amps socket modular type on the independent board with 1.5 sqmm cable complete as specified and directed.

All as per item No 37 here-in-before but for socket modular type 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm PVC unsheathed copper cable and 1.5 sqmm copper conductor cable as earth continuity conductor complete as directed.

Supply & Fixing in repair modular Socket, 6 Amp, 2/3 pin combined 2 module, complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair modular Socket, 6/16 Amp, 2/3 pin combined 2 module, complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair modular switch single pole, one way, 6 Amp, 1 module, complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair modular switch single pole, one way, 16 Amp, 1 module, complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair modular switch single pole, two way, 6 Amp, 1 module, complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair modular Bell push 6 Amp, single pole, 1 module, complete all as specified and as directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Bell multi music type, complete all as specified and directed.

Supply & Fixing in repair Modular step type fan regulator, 120W, 2 module, complete all as specified. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply and fixing in repair modular TV Socket 230 V Complete including box cover plate etc complete all as specified and directed.

Supply and fixing in repair modular Telephonic socket Complete including box cover plate etc complete all as specified and directed.

Supply & Fixing in repair Modular White cover plate with frame, 2 module complete all as specified and directed.

Supply & Fixing in repair Modular White cover plate with frame, 4 module complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Modular White cover plate with frame, 6 module complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Modular White cover plate with frame, 8 module complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Modular White cover plate with frame, 12 module complete all as specified and directed. ( Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Modular Metal flush box 2 module complete all as specified and directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Modular Metal flush box 4 module complete all as specified and directed. ( Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Modular Metal flush box 6 module complete all as specified and directed. ( Make :- Carbtree/Legrand/Indo Asian/C&S.

Supply & Fixing in repair Modular Metal flush box 8 module complete all as specified and as directed. (Make :- Carbtree/Legrand/Indo Asian/C&S.)

Supply & Fixing in repair Modular Metal flush box 12 module complete all as specified and directed.( Make :- Carbtree/Legrand/Indo Asian/C&S.)

Material and labour in repair for point wiring for one light/fan/call bell point with 1.5 sqmm PVC insulated FRLSH unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through suitable size of non metallic rigid PVC heavy duty of size 20/25 mm dia having wall thickness not less than 1.2mm/casing & capping with all accessories and sunk cast pressed steel terminal box made out of MS sheet 1.25mm thick for mounting of fittings like switch, socket and fan regulator with 3mm thick bakalite sheet cover or for fixing of switch/sockets/regulators etc as per site requirement after and making good the distrubed surfaces as per the existing complete all as specified and directed.

All as per item No 62 here-in-before but for one light point controlled by two way switch with 1.5 sqmm cable complete as specified and directed.

All as per item No 62 here-in-before but for 3 pin 6 Amps socket outlet on the same board with 1.5 sqmm cable complete as specified and directed.

All as per item No 62 here-in-before but for 3 pin 5 Amps independent in the same vertical plane/below the switch board of light/socket points with cable,1.5 Sq mm size.

All as per item No 62 here-in-before but for 3 pin 6 Amps switch socket combination on the independent board with 1.5 sqmm cable complete as specified and directed.

All as per item No 62 here-in-before but for switch socket combination 2 in 1,3 pin 5/15 Amp on independent board with 2.5 Sqmm PVC unsheathed copper cable and 2.5 sqmm copper conductor cable as earth continuity conductor complete as directed.

S & F in repair socket outlet 2 in 1, 5 pin 5 Amp,230 Volts flush type. ( Make: Anchor/Indo Asian/Havells.)

M & L in repair for switch socket combination 2 in 1, 5 pin 5 Amps, 240 V Flush type, all as specified.( Make: Anchor/Indo Asian/Havells.)

Supply and fix in repair switch socket combination 2 in 1,5/15 Amps, 230 Volts, flush type universal complete all as specified and directed .( Make: Anchor/Indo Asian/Havells.)

Supply and fixingin repair switch piono, flush type 5 Amps 230 Volt single pole, one way complete all as specified and directed . (Make :- Anchor/Philips/Legrand.)

Supply and fixing in repair switch piono, flush type 5 Amps 230 Volt single pole, two way complete all as specified and directed . (Make :- Anchor/Philips/Legrand.)

Supply and fixing in repair ceiling rose surface bakelite three terminal 65 x 50mm, PVC/Polycarbonate,isolated body complete all as specified and directed .( Make :- Anchor/Philips/Legrand.)

Supply and Fixing in repair for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

S&F in repair bell push, flush button single pole 6 amps 230 volts AC with polycarbonate body all as specified and directed .( Make :- Anchor/Philips/Legrand.)

S&F in repair bell electric heavy duty Ding Dong type 230 volts single pole all as specified and directed . (Make :- Anchor/Philips/Legrand. )

S&F in repair fan regulator electronic, flush type humming with (step type) polycarbonate body suitable to control speed of fan from 0 to 100% and connecting electrically all as specified and directed .( Make :- Anchor/Philips/Legrand.)

Supply and fixing in repair sub-main wiring concealed/surface type as directed from main DB's to sub DB's with PVC (FR-LSH) insulated & unsheathed two runs of 10 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 10 sq mm PVC (FRLS) insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through PVCConduit carefully and taken down old existing aluminium sub main wiring with accessories complete all as directed . Note : Three runs of 10 sqmm cable with PVC conduit/casing & capping shall constitute one unit. (Make : RR Cable/Anchor/ Havells/KEI. )

All as per item No 79 here-in-before but with 6 sqmm copper cunductor.

All as per item No 79 here-in-before but with 4 sqmm copper cunductor.

All as per item No 79 here-in-before but with 2.5 sqmm copper cunductor.

Taking Down Carefully submain wiring of size 2.5 Sqmm to 10 Sqmm ncluding making good disturbed surface of wall ceiling etc complete all as specified and directed

Supply and fix as in repair for PVC insulated flexible copper conductor cable (FRLSH) 1.5 Sqmm 3 core , 1100 Volts grade conforming to IS 694. (Make : RR Cable/Anchor/Havells/KEI.)

Supply and fix as in repair for PVC insulated flexible copper conductor cable (FRLSH) 0.75 Sqmm 2 core , 1100 Volts grade conforming to IS 694.( Make : RR Cable/Anchor/Havells/KEI.)

Supply and Fixing in replacement MCB, single pole, 240 Volts, of capacity (6-32 Amps) 'C' series breaking capacity 10 KA. (Make Havells/Legrand/L&T/C&S.)

Supply and fixing in repair MCB SPN, 16 to 32 Amps, 240 Volts , breaking capacity 10KA complete all directed. (Make Havells/Legrand/L&T/C&S.)

Supply and fixing in repair MCB TPN 63 Amps, 415 Volts , breaking capacity 10KA complete all directed. (Make Havells/Legrand/L&T/C&S.)

Supply and fixing as in repair MCB DB SPN (double door) 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed . ( Make Havells/Legrand/L&T/C&S.)

Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed . (Make Havells/Legrand/L&T/C&S.)

Supply and fixing as in repair MCB DB SPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed. (Make Havells/Legrand/L&T/C&S.)

Supply and fixing as in repair MCB DB SPN (double door) 2 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed . ( Make Havells/Legrand/L&T/C&S.)

Supply and fixing as in replacement sheet metal enclosure with socket plug top and MCB double pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amps SPN MCB 240 Volt complete all as specified and directed.

Supply and fixing as in repair MCB DB TPN (double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.( Make Havells/Legrand/L&T/C&S.)

Supply and fixing as in repair MCB DB TPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed .( Make Havells/Legrand/L&T/C&S.)

Supply and fixing in repair of Vertical TPN DBs with , double door with IP-43 protection suitable for TP/FP MCCB upto 250 Amps as incomer and TPN/SPN MCB as outgoing 415 volts 4 way without MCCB & MCBs, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed .( Make :- Legrand Cat Part No : 5077-50, Model No DPX³ 160+12 or equivalent in makes of Havells/L&T). (Note:- MCCBs/ MCBs shall be measured and paid under relevient item)

Supply and fixing in repair of Vertical TPN DBs with , double door with IP-43 protection suitable for TP/FP MCCB upto 250 Amps as incomer and TPN/SPN MCB as outgoing 415 volts 8 way without MCCB & MCBs, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr in Charge .( Make :- Legrand Cat Part No : 5077-52, Model No DPX³ 160+14 or equivalent in makes of Havells/L&T). (Note:- MCCBs/ MCBs will be measured and paid for separetely.)

Supply and fixing in repair MCCB 4Pole upto 160Amps, 415 Volts ,Adjustable type breaking capacity 35KA including nut bolts lugs & cable of suitable size complete all as directed. ( Make : Havells/Legrand/L&T/C&S.)

Supply and fixing in repair MCCB 4Pole upto 200 Amps, 415 Volts ,Adjustable type breaking capacity 35KA including nut bolts lugs & cable of suitable size complete all as directed. (Make : Havells/Legrand/L&T/C&S.)

Supply and fixing in repair MCCB 4Pole upto 250 Amps, 415 Volts ,Adjustable type breaking capacity 35KA including nut bolts lugs & cable of suitable size complete all as directed. (Make : Havells/Legrand/L&T/C&S.)

M&L for taking out unserviceable DBs of any type / capacity incl MCBs for fixing of new or old all as specified and directed

Supply and fixing in repair building security lighting of LED 35 watts highly efficient lighting solution anodised with heat resistance with accessories provided including necessary electric connection with all accessories required for fixing/mounting with nut bolt washer & clamp support on GI pipe1.5 meters long of suitable diameter complete all as specified and directed.( Make- Havells Cat No:ENDCITYLITPLAT+SL35WLED757 SASYBOPCWOSPD or equivalent in make of Crompton/Syska.)

Supply and fixing in repairs main stream battens fitting LED 20 watt with tube 4 feet long fixing on PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and as directed. (Make: Havells Cat No LUMILINEBS20WLED865SPCWH or equivalent in makes of Philips /Crompton as specified.)

Supply and fixing in repairs main stream battens fitting LED 10 watt with tube 2 feet long fixing on PVC/wooden round block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block complete all as specified and as directed. (Make: Havells Cat No LUMILINEBS10WLED865SPCWH or equivalent in makes of Philips/ Crompton as specified.)

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix in repair 2'x2' energy efficient recess mounting 40 watt LED lumanaries fixing for POP ceiling housing including LED lamps other accessories and necessary electric connection after and including taking down old unserviceable fittings complete all as specified and as directed.( Make : Havells Cat Part No PLANOSUR2X2PLS42WLED857S0720 or equivalent in makes of Philips/Magik Century/Bajaj.)

Supply and fixing LED square light 24 W of size 300x300x20mm, IP20, lumen output 100lm/w, 50Hz, color temp 5700-6500K, CRI>80, THD<10%,PF>0.9, operating voltage 120-300V, surge protection>3KV, lumen 1800, extruded in poly carbonate cover body with all accessories prewired and connecting electrically, after dismaneling of existing light, complete all as specified and directed. (Make: Havells Cat Part No- PLUTO1X1PLR24WLED857S or equivalent in makes of Philips/Baja/ Crompton/Magik.)

Supply and Fixing LED type Recess mounting circular LED downlight luminaire 15 W with PC housing, anti-glare diffuser and separate energy efficient electronic driver, lP20, lumen output 100lm/w, 50 Hz, color temp 5700-6500K, CRI>80, THD<10%, PF>0.9, operating voltage 130-270V, with all accessories prewired and connecting electrically, after dismenteling of existing light, complete all as specified and directed. (Make: Panasonic Cat Part No. PDLM12157 or technically and commercially equivalent models of Philips/Bajaj/Wipro /GE/Syska/Surya/Crompton/Havell).

Supply and fixing in repairs design from the renaissance era yet with a modern look using new generation technology in 35W LED to enliven outdoor areas in perfect synchronization with functionality and aesthetics. IP66 Family of post top lantern designed to complement the geometry of the area including all accessories and connection complete all as specified and as directed.( Make :- Havells Cat Part No VICTORIAPT35WLED757PSYMTOTG or equivalent in makes of Crompton/Bajaj.)

Supply and fixing in repairs aesthetically designed decorative hot dipped galvanised mild steel step 3M pole with grey powder finish. Compatible for all post top range. Window - Plasma cut & duly chamfered opening window of 300 x 110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole including necessary PCC work complete all as specified and as directed.( Make : Havells Cat Part No DECO POLE 3M TOP dia 76mm equivalent in makes of Crompton/Bajaj.)

Supply and fixing in repairs Aviation yellow painted die-cast aluminium alloy housing, red coloured polycarbonate dome and accessories including suitable dia GI pipe for fixing of light with all fixing arrangement including PCC, electrical connections complete all as specified and as directed. (Make : Bajaj Cat No 24973 BJAOL 2 BC or equivalent in makes as approved by GE )

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with GI wire of size 4.0 mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) TYPE B-1 USING 20MM GRADED STONE AGGREGATE cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and directed

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and directed .

Dismantling and taking out old earth plate with connected material from site complete all as specified and directed.

Supply and fixing in repair for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip.and all as per directed.

Dismantling and taking down old earth continuity conductot from site complete all as specified and directed

Supply & fixing in repair for Test point box of suitable size including terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw and connected with earthing strip including taking out old unsv and make good the disturbed surface complete all as per directed.

Taking down geyser and scraping, cleaning including brazing of inner vessel of the geyser at leakage point to made it leak proof including testing pressure and assembling of all component refixing complete for 25 Ltr capacity. Note : New spare parts required for replacement shall be measured and paid seperately.

Supply only heating elements of 2 KW 230 V inbuilt with thermostat, indicator lamp ,apparatus plate other accessories suitable for existing water heater of any type including connection with suitable cable all as directed

Supply only heating elements of 1.5 KW 230 V inbuilt with thermostat, indicator lamp ,apparatus plate other accessories suitable for existing water heater of any type including connection with suitable cable all as directed

Supply only electronic digital type tempreture indicator as suitable for existing water heaterall as specified and directed

Supply only PVC inlet connector pipe 450mm long for geyser, heavy duty,with brass coupling both ends sutiable to fix inlet of geyser.

Supply only 450mm long brass CP connection with 2 nuts without nipple suitable for geysers.

Material and labour preparation to old painted surface of storage water heater and painting of geyser 25 ltr capacity with two coats of synthetic enamel paint (white) by using spray gun all as directed.

Supply and fix as in repair for Split cover made out of 22 guage sheet duly painted with synthetic enamel paint suitable for water heater of 25 ltr capacity.

Supply and fixing as in replacement patented nano Glassline coated steel inner tank of 25Ltr capacity geyser suitable for model of make: Cromption/Usha/Bajaj complete all testing and make good in disturbed surface at existing location and all as specified and directed.

Supply and fix as in repair for non return valve, 15mm bore, screwed down high pressure, cast copper alloy, chromium plated.

Supply and fix as in repair for pressure release valve 15mm bore 'T' type at inlet/ outlet or dead weight type heavy duty.

Supply and fix as in repair for glass wool , between the inner and outer vessel of water heater any type and capacity.

Supply and fix in repair 15 Amp plug top Make Anchor/Philips/Cona.

Supply and fix in repair rubber gasket as in repair for appratus plate any type/capacity all as specified and directed.

Supply and fix in repairs Bib taps, cast iron alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia complete all as specified and directed

Material and labour for power supply unit consisting of starter with 20 Amps over load protection, MCB-20 Amps, 2 Pin & Earth plug socket including MS/PVC box & top cover for AC. (Make : Legrand/Crabtree/Cona.)

Taking down ceiling fan of any type, any make and any sweep for repairing, opening the body and blade, checking for repalcement of unserviceable spares,cleaning, overhauling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same as directed Note : Supply & fixing new spare parts required for replacement shall be measured and paid seperately

Rewinding of ceiling fan in repair, 1200mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotton binding, heat varnished and including flexbile cable for electric connection all as directed.

Supply & fixing in repair of ball bearing of size 6201/6202. (Make :- Tata/SKF.)

Supply & fixing in repair of metal bush bearing suitble for ceiling fan 1200/1400 mm sweep of any type and size complete all as specefied and directed.

Supply and fixing in repair of ceiling fan shaft suitable for 1200/1400 mm sweep of any type and size complete all as specified and directed

S&F in repair capacitor for ceiling fan 2.5 MFD complete all as specified and directed.

Supply & fixing in repair fan blade (3 Nos blade is one set) 1200 mm sweep suitable for USHA/Havells/Bajaj or equivelent make fan and all as specified and directed. (Make :- Usha/Bajaj/Havells.)

Supply and fix as in repair of MS clamps made out of 50 x 6mm flat iron suitable for hanging of ceiling fan on pipe including necessary cutting, threading, drilling, fixing arrangement split pin, nuts, bolts washer etc as directed.

M&L in replacement of GI tubing 15 mm 'light grade', galvanised, with all fitting; suitable for hanging of ceiling fan as required all as per directed.

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.all as SPECIFIED AND directed.

Taking down exhaust fan/wall mounted of any type, any make, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position Note : New spare parts required for replacement shall be measured and paid seperately.

Rewinding of exhaust fan, 250/300/350/400mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and all as directed.

Supply & fixing in repair Exhaust fan blade of capacity 200mm suitable complete all as specified and directed(Make :- Usha/Bajaj/Havells.)

Supply & fixing in repair Exhaust fan blade of capacity 300mm suitable complete all as specified and directed. (Make :- Usha/Bajaj/Havells.)

Supply & fixing in repair Exhaust fan blade of capacity 350mm suitable complete all as specified and directed. Make :- Usha/Bajaj/Havells.

M&L for Painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, two coat after cleaning all DUST ETC complete all as specified and directed

S&F in repair capacitor for ceiling fan 3.15 MFD complete all as specified and directed.

Supply and fixing in repair of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep duly cutting as per requirement complete all as specified and directed. (Make :- Anchor/Philips/Cona/Legrand.)

All as per Item No 151 here-in-before but 175 mm x 100 mm and 50 mm deep.

All as per Item No 151 here-in-before but 250 mm x 200 mm and 50 mm deep.

RAY STANDARD ENGG CO.

Tirupati Buildcon Pvt. Ltd.

THE PLANTERS ENGINEERING CORPORATION

BHAUMIK CONSTRUCTION

AUTO ELECTRICALS

Frazco Enterprise

DIPAK ENTERPRISE