PROVISION OF TWO SHEDS AT CG ENCLAVE FOR SETTING UP OF PR EQUIPMENT STORAGE FACILITIES, CASU(GOA) WORKSHOP AND LAYAPART STORES FOR SHIPS BASED AT GOA UNDER GE(I)(CG)GOA

Amount

SCH A PART -I( B/R WORK) Excavating in post holes (or similar holes) each n exc 0.5 cum, in hard/ dense soil getting out and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. [Note: Filling of PCC in post holes will be paid under Srl item No 2.00]

M & L Plain cement concrete in foundations, filling and mass-concerte type C2-1:3:6 (using 40mm graded stone aggregate) holes, complete all as specified and directed.

M & L steel Tubes, `medium grade'of 80 mm Internal dia of galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors / post complete all as specified and directed.

S & F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, etc of FE-410W (Gde-E-250) quality B complete all as specified and directed.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment FE -410W (Gde -E-250) Quality B complete all as specified and directed.

S & F, Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers an one hexagonal or square nut, n exc 5cm long of 5 to 10mm diamter shank in mm complete all as specified and directed..

M & L preparation of steel surface & appying two coat of synthetic enamel paint over & including one coat of zinc chrome primer of newly or previously untreated steel surfaces of any description over 10 cm gith or width, not otherwise described complete all as specified and directed.

S & F, pre-painted galvalume aluminium zinc caoting GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/Cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F, pre-painted galvalume aluminium zinc caoting GI based Plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge and valley gutter, fixed with self tapping screws complete all as specified and directed.

M & L precast cement concrete block masonry 1:3:6 type C-1, using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in port 1:6 cement mortar complete all as specified and directed.

M & L Rendering 15mm thick, on other than fair faces of brick or stone surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

M & L applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plaster surfaces internal & external complete all as specified and directed.

M & L surface excavation not exc 30cm deep and getting out in soft/disintegrated rock complete all as specified and directed.

M & L 75mm thick PCC 1;4;8 type D-2 using 40mm graded stone aggregate as in Sub base complete all as specified and directed.

S & F Plastic dividing strips, 1.5mm thick and 38mm width inserted in position, confirm to design complete all as specified and directed.

M & L 40mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate), Finishing cement concrete surface even and smooth complete all as specified and directed..

SCH A PART -II ( E/M INTERNAL ELECTRIFICATION WORK) M & L submain wiring with 2 runs of single core PVC insulated FRLS unsheathed suitable for 1100 volts, multistranded copper conductor conforming to IS:694:1990 with ISI marked cable of size 1.5 Sqmm and one run of 1100 Volts grade PVC insulated FRLS unsheathed 1.5 Sqmm multistranded copper conductor cable 1100 volts green colour as continuous earth conductor drawn in and including PVC conduit medium grade of size 25 mm dia , ISI marked for sub-main wiring on surface in wall/roof etc. with required accessories complete all as specified and directed. [Note: 2 run of main wire , one run of earth wire alongwith PVC conduit and accessories shall be measured as one run]

S & F MCB DB SPN double door 8 way 240 volts complete all as specified and directed.

S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP in the MCB DB with connection testing and commissioning complete all as specified and directed.

S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP in the MCB DB with connection testing and commissioning complete all as specified and directed.

M & L ceiling rose 3 treminals/ PVC polycarbonate isolated body size (65x50) mm surface type, 230V complete all as specified and directed.

S & F in repairs LED tube light fitting 1 x 20 W, 230V wall mounted integrated batten, 4 ft LED module fixed/hanging on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, using galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

SCH A PART -III (E/M EXTERNAL ELECTRIFICATION WORK) S & F LED street light fitting 50 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S & F Hot press moulded SMC boxes of size 250 x 200 x 100 mm with one No MCB SP 6 Amps, connector 4 way 16 Amps including fixing clamps, nut bolts etc complete as street light terminal boxes complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 meter wide and not exc 1.5 mtr in depth for laying cable etc and getting out in soft / disintegrated rock complete all as specified and directed.

M & L sand cushioning with river washed and screened dry fine sand to under ground cable 23 cm thick, 15 cm below the cable and 8 cm after laying the cable, duly punned complete all as specified and directed. [Note: Only punned thickness shall be taken for measurement]

Returning filling in including spreading, levelling, watering and well ramming, in layers not exceeding 25cm thick complete with in soft disintegrated rock complete all as specified and directed..

Removing excavated surplus soil material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak size 250 x 150mm x 40mm complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed.

M/S jvsr constructions

Tara Construction

Tiwarinassociates