RVPN/EHV/ASP/TN97

MATERIAL/ EQUIPMENT

Supply part

132KV D/C TTA-STUB

132KV D/C TTA-SUPERSTRUCTURE

132KV D/C TTB-STUB

132KV D/C TTB-SUPERSTRUCTURE

132KV D/C TTC-STUB

132KV D/C TTC-SUPERSTRUCTURE

132KV D/C TTD-STUB

132KV D/C TTD-SUPERSTRUCTURE

220KV D/C TTD-STUB

220KV D/C TTD-SUPERSTRUCTURE

220KV D/C SPECIAL TOWER-STUB

220KV D/C SPECIAL TOWER-SUPERSTRUCTURE

220KV D/C SPECIAL TOWER +9M EXT

220KV D/C TTD +6M EXT

132KV D/C TTA +3M EXT

132KV D/C TTA +6M EXT

132KV D/C TTB +3M EXT

132KV D/C TTC +3M EXT

132KV D/C TTD +3M EXT

132KV D/C TTD +6M EXT

132KV-BT6 STRUCTURE

132KV-BB1 STRUCTURE

ACSR PANTHER (30/3MM AL +7/3MM STEEL)

S/S H/W PANTHER

D/S H/W -PANTHER

S/T H/W PANTHER

D/T H/W PANTHER

PREFORMED ARMOUR ROD -PANTHER

MID SPAN COMP. JOINT -PANTHER

REPAIR SLEEVE -PANTHER

VIBRATION DAMPER -PANTHER

EARTHING SET-PIPE TYPE

24 FIBER(DWSM) OPGW FIBRE OPTIC CABLE

H/W SET-24 FIBER OPGW FIBER OPTIC CABLE

(a) JOINT BOX(24 FIBER) OPGW CABLE

b)OFC UNARMOURED CABLE 24 CORE

c)DANGER PLATE

NUMBER PLATE

PHASE PLATE

70KN B&S DISC INSULATOR

120KN B&S DISC INSULATOR

G.I.NUT & BOLT 16X35 MM

G.I.NUT & BOLT 16X40 MM

G.I.NUT & BOLT 16X45 MM

G.I.NUT & BOLT 16X50 MM

G.I.NUT & BOLT 16X55 MM

G.I.NUT & BOLT 16X60 MM

G.I.NUT & BOLT 16X65 MM

STEP BOLT-16X175MM WITH 2NUTS & WASHER

SPRING WASHER ELECTRO GALVANISED 16MM

Cable Supply Part

132 KV Single core, 400 mm2, XLPE Copper Cable

145 KV rated Voltage Pre-moulded Straight Through Joint suitable for above cable

Galvanized Steel Supporting Structures/arrangement, gantry structure, ladders etc along-with clamps, connectors, nut-bolts, washers, foundation bolts etc. for suitable and safe termination of XLPE cable from terminal towers maintaining statutory clearances and safety as per IE rules

132 kV class of 120 kV rating LA with grading ring, discharge counter with Milli meter

Terminal connector suitable for ACSR Panther on Surge Arrester (Terminal connector suitable for ACSR Panther on the Outdoor cable termination to connect cable end termination to ACSR panther Line)

145 KV rated Voltage Pre-moulded Outdoor end termination Kit complete with accessories suitable for above cable

Solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-Phase

Galavanized Steel suppoting structures along with clamps, connectors, nuts-bolts, washers, foundation bolts etc. for Outdoor 132 KV cable end terminations (a composite structure for mounting link boxes and cable end terminations) for each phase

Earthing Material including cast iron pipes with suitable clamps, charcol, common salt etc.

Terminal connector suitable for ACSR panther on the item No. 7 to connect cable end termination to Outdoor Switchyard Equipment

Warning Tapes as per Specification

Optical Fiber Cable and associated accessories/items as per specification

OLTE equipment consisting of fully wired cabinet with base 19" equipment rack with control synchronization, Alarm & Power supply cabinet-1 No, Central Processing card-CPU-2 no power supply unit-48VDC-2 No, OLTE-4 port STM-1(1SSMbps Card)-1 No, SEP duplex LC connector for OLTE Card-4 No, OFC Patch Cords-20M -8 No, 8Port-2w/4w E&M Interface card- 1 No, 4 Port data Interface card-1 No., 4 Port Ethernet Card-1No., 4 Command Integrated Tele-protection Card- 1No., Line Differential relay Interface card(min-2 port)-1 No., Engineering order wire phone-1 No., Laptop (Core 3 processing family, 3.1GHz & above 15.0" LED,1TB HDD, 4GB RAM, DVD R/W) with configuration Software with preloaded licensed Microsoft Window 10OS as offered- 2 No.

Retrofit of Protection Relays (Line Differential cum Distance-Numerical Relay)

Add: Any other item bidder may require to Complete the Cable System as per specification requirements

Description of Work / Item(s)

Service Part-Overhead work

Detail Survey as per tentative route

Detail Survey as per tentative route - Which includes the following major activities - Pegging of line route,providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey ,profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills , sand dunes etc. as per specification and tower scheduling.

Check survey as per approved route of line Which includes - Re -checking of the line route as per approved profile, chainage , tower center marking, pit marking,bisection of angle tower as required at site.

Excavation - Excavation,excluding back filling ,including shoring, shuttering,dewatering,etc.up to the required depth as per foundation specification/ drawings . (1) Normal soil

Setting of template and stub/anchor bolt - Setting of template and stub/anchor bolt and removal after concreting,excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming and watering as per specification. (i) Tower including Ext. upto 9 mtr.

Concreting - Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20 mm nominal size, water etc.,preparing surfaces,shuttering, mixing, placing, ramming,curing, finishing as per specification and drawing

(ii) 1:3:6 Mix

(iii) 1:2:4 Mix

(iii) 1:1.5:3 Mix

Steel Reinforcement - Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

Earthing - (A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats & connectors, but including coke / charcoal, etc., excavation, augering and backfilling in all types of soil.

Erection of super structures including D-shackles,ACD, Hangers, U- Bolts, step bolts,danger plate,phase plate ,number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm /beam level including application of Zinc Rich paint. (i) Erection of tower (with Ext. upto 9 mtr.)

Erection of substation structures including leveling, setting of stub & Tighting,Punching of Nuts& Bolts and tack welding upto beam level as per specification.

Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line. (i) Single conductor

OPGW Cable work

24 Fiber (DWGW) OPGW optical Fiber Cable

Installation Hardware Set for above 24 Fiber OPGW Optical Fiber Cabling including of all Cable Fitting and accessories except Joint Box

Joint Box (24 Fiber)

Service Part – Cable work

Survey

Surveying of cable route, excavation of trial holes as per field requirement, preparation of cable route profile, drawing of cable laying, final route alignment marking lines and grades/ preparation of final cable route drawing after approval and preparing bill of materials for complete route shown in drawing i.e. between terminal towers

Evaluation of thermal resistivity of soil along cable route (as per technical specification)

Handling, Transportation to site and laying of 132 kV, Single Core, 400 Sq. mm XLPE Copper Cable as per foregoing specification requirements

Establishing of 1 ckt. having 3 Phase + 1 spare 132kV single core, 400 sq. mm copper cable in trefoil/ approved formation along-with pilot fiber cable, providing of Warning tape tagging fixing, pipes for drain & gate crossing as per drawings and specifications in trench by pulling, drawing, etc. including cables, using standard cable installation equipments and as per directions of the engineer in charge and returning of unused items in Store.

Handling and making of straight through joints for 132 kV Single Core 400 Sq, mm Power Cable (XLPE Copper Cable) as per specification

Handling and making of outdoor type cable end terminations for 132 kV single core power cable as per specification

Erection of Galvanized Steel Supporting Structures/arrangement, gentry structure, ladders etc along-with clamps, connectors, nut-bolts, washers, foundation bolts etc. for suitable and safe termination of XLPE cable from terminal towers maintaining statutory clearances and safety as per IE rules for each phase.

Installation of 132KV Class of 120KV rating Surge Arrester with grading ring,discharge counter with Mili meter

Erection of Galvanized Steel Supporting Structure alongwith clamps, connectors, nut-bolts, washers, foundation bolts etc. for Outdoor 132 kV Cable end terminations (a composite structure to mount link boxes and the cable end terminations) for each phase

Erection of solid bonding Link box with Link plates, bonding & grounding cable complete with other associated accessories for 1-phase.

Earthing Material including cast iron pipes with suitable clamps, charcoal, common salt etc. complete set for each Cable Circuit(having 3 core + 1 Spare)

Terminal connector suitable for ACSR Panther to connect cable end termination to ACSR panther Line.

Erection of underground Optical fibre cable and associated accessories/items as per specification including FODP, patch cords etc.

OLTE equipments consisting of Fully Wired Cabinet with base 19” equipment rack with Control, Synchronisation, Alarm & Power supply cables- 1 No.;Central Processing Card CPU- 2 Nos.;Power supply unit -48VDC- 2 Nos.;OL FE - 4 Port STM 1(155 Mbps Card)- 1 No.;SFP Duplex LC Connector for OLTE Card- 4 Nos.; OFC Patch Cords - 20 m- 8 Nos.; 8 Port 2w/4w E&M Interface Card- 1 No.;4 Port Data Interface Card- 1 No.;4 Port Ethernet Card- 1 No.;4 Command Integrated Teleprotection Card- 1 No.; Line differential relay interface card (min 2 ports)- 1 No.; Engineering Order Wire Phone- 1 No.; Laptop (Core i3 processor famiIy,3.1 GHz & above, 15.0" LED, 1TB HDD, 4 GB RAM, DVD R/W) with configuration Software for all OLTE Terminals/ Equipments with preloaded licensed Microsoft Windows 10 OS as offered- 1 No.

Retrofitting of protection relays (Line differantial cum distance - Numerical relay with optical interface)

Charges for conducting pre-commissioning tests as per specification and successful commissioning of circuits

CIVIL WORK

Cutting Black Bitumen surface up-to any depth including all layers of crust for laying Power Cables etc, staking of useful material and disposal of surplus debris including all leads including barricading, providing danger board/diversion board, lighting, reflectors etc.

Horizontal Direct Drilling (Trenchless Digging) method (for approved formation i.e. Single Circuit with 3 Phase + 1 Spare and Optic Fibre Cable) wherever open cut method cannot be adopted. (If required) (for single circuit with 3 cable core in each circuit + 1 Spare)

Earth work in excavation for buried cable trenches/foundations including dressing of sides and ramming of bottoms, lift up to 2.5 mtr. including taking out the excavated soil & backfilling of jhiri with watering & ramming , timbering & shoring ( wherever required ) disposal of surplus excavated soil as directed with all lead and lift including barricading, providing danger board/diversion board, lighting, reflectors etc.

Providing and laying of Cement concrete including curing, etc using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, excluding the cost of shuttering using 1 cement: 4 sand: 8 stone aggregate (For equipment foundation, junction box etc.)

P&L cement concrete in R.C.C. work in foundation ,rafts, footings, strap beams ,bases of columns etc., including curing ,compaction, finishing with rendering in cement sand mortar 1:3 (1cement :3 sand) and making good the joints , excl., the cost of centring and shuttering and reinforcement :M-20 grade mix 1:1.5:3 (1cement:1.5coarse sand : 3 graded stone aggregate 20 mm nominal size (For equipment foundation, junction box , culvert etc.)

Brick wall works, if required

Providing and fabricating steel reinforcement for R.C.C. work bending ,placing in position and binding complete including cost of binding wire in foundation ,raft footing ,strap beams base of column etc., up to plinth level hot rolled deformed (I.S.1139) cold twisted (I.S.1786)bars (For equipment foundation, junction box \ etc.)

Centring and shuttering with plywood or steel plates including strutting, propping bracing both ways with wooden members and removal of formwork for superstructure up to 4.5m height above plinth level for (For equipment foundation, junction box etc.)

Providing & Fixing of steel fabrication made of angles, tees, square bars or other flats black pipe with hold fast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

Providing ,Laying and Jointing RCC class NP-2 Non Pressure pipes (IS:458 Mark ) of approved make with collars, jointed with CM 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete: 450 mm D

Providing & Fixing of Reinforced Ferro Cement Cable Trench Covers designed for 'A' & 'AA' loading duly marked on cover with adequate reinforcement having thickness 75mm to 100 mm anti corrosive bitumen pained MS plate Rim and MS lifting hooks admixtures like plasticizer bond -improving compound, shrinkage resistance compound, abrasion resistant complete as per approved design ( For cable joint box) (For any span)

Providing & Laying HDPE pipe heavy duty of approved make jointed with solvent cement [to be used for horizontal direct drilling (Trenchless digging)/ Road Crossings]

(i) 250 mm dia.(for single circuit with 3 cable core in each circuit + 1 Spare)

(ii) HDPE PLB Duct for Optical Fiber Cable

Supply and laying inter locking RCC cable covers as per approved drawing

Supply, spreading of clean river sand in the cable trench and cable joint pit as per specification.

Providing & Fixing Cable Route Marker along the route of cable at the spacing of 50 meter etc. as per drawing and site requirement.

RR Stone Masonry in F/P CSM 1:4

Plastering 20 mm thickness CSM 1:6

Providing and Laying plane Cement Concrete M-20 grade

Add: Any other item bidder may require to complete the Civil works as per specification requirements

Rajesh Power Services Pvt Ltd

Kay Cee Energy and Infra Private Limited