Reparing work of Public Toilet Blocks at Various Places in Baramati, for

Amount

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete SSR 19-20 I. No. 46.19 P. No. 378

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed concrete around pan removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc. carefully and throwing out the refusal outside etc. complete. SSR 19-20 I. No. 46.41 P. No. 380

Removal of plants / ficus grown by pulling out root system embedded in masonry, cutting stem and application of high/gur/lime formulation as specified by the Architect or other patented chemical biocide treatment such as biocide 'Glycel' (iso proplamine salt of glyphosate) or other chemical as specified by the Engineer in charge etc. complete. SSR 19-20 I. No. 46.58 P. No. 383

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. SSR 19-20 I. No. 46.15 P. No. 378

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. SSR 19-20 I. No. 46.09 P. No. 377

Excavation for foundation / pipe trenches in slush muddy / marshy / slushy / soil including use of poclain, labour for dewatering during execution including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, preparing the bed by cleaning the mud, labour required for execution for shuttering item but excluding backfilling, etc. complete. Providing and fixing shuttering shall be paid separately.MJP DSR 19-20 I. No. 08 P. No. 52

Conveying the dismental material upto 2.00 km as directed by Engineer Incharge. (SSR P. No. 395)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR 19-20 I. No. 21.02 P. No. 197

Excavation for foundation in hard murum including removing the excavated material upto distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50m) By Mechanical Means SSR 19-20 I. No. 21.06 P. No. 197

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 19-20 I.No. 21.38 P.No. 201

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 19-20 I.No. 24.01 P.No. 226

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR 19-20 I.No. 27.01 P.No. 254

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. SSR 19-20 I.No. 27.05 P.No. 254

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in al lpositions including scaffolding and curing etc. complete. SSR 19-20 I. No. 32.04 P. No. 268

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. SSR 19-20 I. No. 32.07 P. No. 268

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using water proofing compound at 1kg per cement bag curing the same for not less than 2days and keep ingthe surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR 19-20 I. No. 32.11 P. No. 269

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. SSR 19-20 I. No. 32.15 P. No. 269

Providing and fixing factory made panelled door shutter in single leaf 35mm thick style and rail without ventilator with CCTW panels12mm thick including wrought iron hold fast and stainless steel fixtures with oil painting 3 coats etc. complete. SSR 19-20 I. No. 39.13 P. No. 315

Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick with Fiber Coating both Side ventilator commercial type of exterior grade as per detailed drawings with wrought iron holdfast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. SSR 19-20 I. No. 39.10 P. No. 315

Replacement of damaged Aldrop 300mm Chromium plated of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. SSR 19-20 I. No. 46.48 P. No. 382

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete. SSR 19-20 I. No. 26.46 P. No. 251

Providing and fixing on walls / ceiling / floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete. SSR 19-20 I. No. 42.55 P. No. 358

Providing and fixing on walls / ceiling / floor 20mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 19-20 I. No. 42.56 P. No. 358

Providing and fixing on walls / ceiling / floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 19-20 I. No. 42.57 P. No. 359

Providing and fixing on walls / ceiling / floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 19-20 I. No. 42.59 P. No. 359

Providing and fixing 15mm dia. Screw down bib / stop tap of brass including necessary socket union nut complete. SSR 19-20 I. No. 41.40 P. No. 345

Providing and fixing screw down for 40mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete. SSR 19-20 I. No. 41.47 P. No. 346

Providing and fixing 75mm dia stabiliser pipe / P.V.C. soilvent / waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete SSR 19-20 I. No. 42.51 P. No. 358

Providing and fixing 100mm dia stabiliser pipe / P.V.C. soilvent / waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete SSR 19-20 I. No. 42.52 P. No. 358

Providing and fixing push cock (Self closing tap) symet type of 15mmdia. including necessary socket, testing etc. complete. SSR 19-20 I. No. 41.54 P. No. 347

Providing and laying concrete pipes of I.S. NP. Class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. SSR 19-20 I. No. 42.07 P. No. 351

Providing and fixing reinforced cement concrete cover of size 90cmx45cm with frame over inspection chamber etc.complete.Heavy duty (225 kg) SSR 19-20 I. No. 42.68 P. No. 360

Providing and fixing reinforced cement concrete cover of size 60cmx45cm with frame over inspection chamber etc.complete. Heavy duty (160 kg) SSR 19-20 I. No. 42.70 P. No. 360

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. SSR 19-20 I. No. 42.67 P. No. 360

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. SSR 19-20 I. No. 42.12 P. No. 352

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. SSR 19-20 I. No. 42.13 P. No. 352

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe upto the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floor stesting etc.complete. (prior approval of sample and brand by Ex. Engineer is necessary before use) SSR 19-20 I. No. 43.20 P. No. 368

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580mmdia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:10) cement concrete bedding 15mm thick, 10liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. SSR 19-20 I. No. 42.33 P. No. 355

Providing and fixing white glazed earthen ware lipped flat back / corner type Urinal with PVC 5liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. SSR 19-20 I. No. 41.60 P. No. 347

Providing and fixing white glazed earthen ware Wash Hand Basin of 55cm.x40cm. size including cold water pillar tap / cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap upto the outside face of the wall. Making good the damaged surface, testing etc. complete. SSR 19-20 I. No. 41.63 P. No. 348

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation in cluding of delivery upto destination hoisting and fixing of accessories such as inlet, outlet over flow of all tanks capacity above1000 to 20,000 litres SSR 19-20 I. No. 42.54 P. No. 358

Providing cement based waterproofing treatment to terraces (Indian waterproofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved waterproofing compound and laying the brick bats on bottom layer in C.M. 1:5 admixed with approved water proofing compound filling upto half depth of brickbats, curing this layer for 3days, applying cement slurry over this layer joints of brickbats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1Kg per bag including finishing the surface smooth with cement slurry admixed with approved waterproofing compound. Marking finished surface with false squares of 300mmx300mm. making the junctions at the parapet rounded and tapered top for required height, with dripmould at the junction of plaster and parapet and curing and covering 10years Guarantee against leak proof nesson Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 19-20 I. No. 31.04 P. No. 263

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30 mm thick and required width in plain / diamond pattern on bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 19-20 I. No. 33.06 P. No. 273

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR 19-20 I. No. 33.18 P. No. 276

Providing and laying matt finish ceramic tiles of having size 30cm x 30cm confirming to I.S. 15622 / 2006 (group DII-A) and 7 to 8mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white / colour cement slurry cleaning curing etc. complete. SSR 19-20 I. No. 33.24 P. No. 276

Providing and laying ceramic tiles having size 30cm. x4 5cm. confirming to corresponding I.S. for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing etc. complete. SSR 19-20 I. No. 33.26 P. No. 277

Providing and fixing machine cut mirror polished 18mm to 20mm thick telephone black granite / Amba White / Catbary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish SSR 19-20 I. No. 33.36 P. No. 278

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60millimeter thickness of having a strength of 400Kg / sq.m of approved quality and shape on a bed of crushed sand of 25 to 30millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) SSR 19-20 I. No. 33.53 P. No. 281

Providing and laying chequered tiles of approved quality of size 30cm x 30cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. SSR 19-20 I. No. 33.66 P. No. 283

Machine polishing to cement / marble mosaic tiled flooring or any other type of flooring including cleaning, washing, etc. complete. SSR 19-20 I. No. 33.78 P. No. 284

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: ForItemNo.15 to18 prior approval of Superintending Engineer will be necessary SSR 19-20 I. No. 35.26 P. No. 289

Providing and applying washable powder distemper of approved colour and shade to old and new surfaces in one coat including scaffolding, preparing the surfaces (excluding the priming coat) etc.complete. SSR 19-20 I. No. 36.08 P. No. 290

Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. SSR 19-20 I. No. 35.21 P. No. 288

Providing and applying two coats of synthetic enamel paint of approved colour to new / old structural steel work and wood work in buildings, ncluding scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. SSR 19-20 I. No. 35.07 P. No. 286

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 19-20 I. No. 42.20 P. No. 353

Point wiring for light /fan /bell in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW PWD Elect. DSR 18-19 I. No. 1-9-5 P. no. 17

Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW PWD Elect. DSR 18-19 I. No. 1-9-7 P. no. 17

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. PWD Elect. DSR 18-19 I. No. 2-10-11 P. no. 42

Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. PWD Elect. DSR 18-19 I. No. 2-5-2 P. no. 35

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner. PWD Elect. DSR 18-19 I. No. 2-12-14 P. no. 43

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF PWD Elect. DSR 18-19 I. No. 2-2-5 P. no. 33

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP PWD Elect. DSR 18-19 I. No. 9-1-1 P. no. 161

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/MCB PWD Elect. DSR 18-19 I. No. 5-3-3 P. no. 96

Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL PWD Elect. DSR 18-19 I. No. 7-1-4 P. no. 126

Supplying and erecting Submersible pumpset of required HP with 415V, 50c/s AC supply suitable for 150mm dia. Borewell, suitable for 20 to 80 LPM discharge at 91 to 42m head & (Max efficiency at 68m head & 50 Ipm) discharge & delivery pipe of necessary diameter with a necessary H. type clamp as per specification No. WP-SMP PWD Elect. DSR 17-18 I. No. 12-3-4 p. No. 248

Supplying and erecting D. O. L. Starter suitable for 250V. Single phase, 50 cycles with overload element with necessary materials and connected to supply upto 3 H.P. PWD Elect. DSR 18-19 I. No. 12-4-1 P. no. 218

Providing and placing soap dispencer of approved make. (Market Rate)

Providing and placing P.V.C./ plastic door mat of size 450x600 minimum 8mm thick of approved make and quality. (Market Rate)

Providing and fixing guard pipe 50mm dia. Stainless steel SS 403 as directed by Engineer-in-charge.(Market Rate)

Dyneshwar Machindra Bagal

Devgiri Enterprises,