Construction of Allied Civil Works and Sanitary Works for the Construction of Girls Hostel (Block B) at Govt. Medical College, Jammu.

Amount

Earthwork in excavation by mechanical means in foundation, trenches, drains,pipes, cables etc including disposal of excavated earth upto 1 mtr from cutting edge, disposal earth to be levelled and neatly dressed in : All kind of soil.

Earthwork in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 mtr and lift 1.5 mtr, disposed earth to be levelled and neatly dressed in all kinds of soil.

Centering and shuttering including strutting, propping etc and removal of form work:-

a) Foundations, footings, bases of columns etc

b) Walls (any thickness) including attached pilasters, buttressas, plinth and string courses.

c) Suspended floors, roofs, landings, balconies and acess platform

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering.

a) 1:4:8 (1cement : 4 coarse sand : 8 Graded stone aggregate) 40mm nominal size, crushed.

b) 1:3:6 (1cement : 3 coarse sand : 6 Graded stone aggregate) 20mm nominal size, crushed.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttersses, plinth and string courses, fillets, columns, suspended floors pillars, piers, abutments, posts and struts etc upto floor level V excluding cost of centring and shuttering, finishing & reinforcement.. in 1:2:4 (1cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all completed. (TMT Bars / Cold Twisted Bars)

Brick work with common burnt clay non modular bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for Brickwork in super structure above plinth level upto floor V level (By manual means)

Extra for Brick work in square or rectangular pillars

15mm plaster of mix 1:4 (1cement : 4 fine sand)

Finishing walls with textured exterior paint of reqd. shade on new work (20 more coats applied @ 3.28 l / 10 sqm over and including base coat of water proofing cement paint.

Steel work welded in built up sections / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved coat of steel primer using structural steel etc as reqd.

Providing and fixing M.S grills of reqd. pattern in specified area with M.S flats, sqaure on round bars etc including priming coat with approved steel primer all complete with rawl plugs / welding as direction of Engineer I/c.

Providing and fixing concertina coil fencing with reqd. dia 610mm (having 15no's. round per 6 mtr length) upto 3m height of wall with existing angle is on "Y" shaped placed 2.4m or 3 mtr apart and with I horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or G.I barbed wire tied to angle iron all complete as per Engineer I/c with reinforced barbed tape (RBT) / spring core (2.5mm thick) wire of high tensile strength of 165 kg / sqm with tape (0.52mm thick) & weight 43.47 g / mtr.

Providing and laying coping over the boundary wall / parapet and levelling course with 50mm thick cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) crushed.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give even shade on new steel work.

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc all complete as per direction of Engineer I/c.

Removal of mulba / building rubbish from designated site and its disposal as per direction of Engineer I/c, all inclusive.

Removal of unhygenic material (as classified) from designated sites and its disposal as per directions all inclusive.

Fabricating / manufacturing of wardrobe / cupboard made up of 18mm thick ply sides, shelves, drawer made up of 12mm thick ply and back fitted with 6mm ply and shutters made of 19mm thick M.R grade ply board. Sides and shelves lipped with 0.8mm laminate and 1.0mm thick laminate on front shutters. Ply to be used shall be of Green or Century make BWP (Boiling Water Proof) and laminate of Greenlam / Merino make with all necessary accessories including Tower Bolt, Hinges, Locks, Handles, Catcher of stainless steel including all carriages by head load / Mechanical Transport. (At all floor levels)

Fabricating and manufacturing of customized bed having size 6'-6" x 3'-0" made up of side 19mm thick premium board including head and foot boards, bottom fitted with 12mm ply, sides fitted with 3" x 1½" teakwood supports and 4 No. of teak legs (3" x 3" x 1½"). All sides, head, foot board lipped with 1.0mm laminate of greenlam / merino of approved colour & shade and esposed edges are fitted with teakwood moulding / margin, finished with polishing complete including all necessary accessories of stainless steel, Hinges etc. (At all floor levels).

Providing visitor / study chair having frame made up of 1" x 16 gauge pipe "S" type with leatherite cushioned seat and back with arm fitted with wooden / PV handle (SF-65) of size (50 cm x 45 x 76 cm) of make Godrej & nilkamal or equivalent including carriages by HL/MT.

Providing Wooden table size (1200 x 600 x 760mm) made of premium board made up of 19mm thick board on top, sides and back fitted with 6mm thick ply, 1.0mm thick laminate (outer) and 0.8mm thick laminate (inside) lipped on all surfaces including moulding / margin with polishing on exposed edges complete. Laminate to be used shall be of Greenlam / Merino and ply board of century / green ply or equivalent including carriages by HL/MT.

Fabrication and manufacturing of study table having size 3'-0" x 2'-0" x 2'-6" made up of 19mm thick premium commercial board on top and sides, back fitted with 6mm ply with one No. of drawer and teakwood footrest 0.8mm thick pure laminate lipped on all inside and 1.0mm thick approved laminate on top and sides. Exposed edges are fitted with teakwood moulding / margin with polishing and hardware including SS handles, locks of ISI make complete including carriages by HL/MT.

Providing Wooden Dinning table size (2400 x 1200 x 760mm) made of premium board made up of 19mm thick board on top, sides and back fitted with 6mm thick ply, 1.0mm thick laminate (outer) and 0.8mm thick laminate (inside) lipped on all surfaces including moulding / margin with polishing on exposed edges complete. Laminate to be used shall be of Greenlam / Merino and ply board of century / green ply or equivalent including carriages by HL/MT.

Providing and fixing white vitreous china pedestal tupe water closet (European type W.C pan) with seat and lid, 10l low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures, complete including cutting and making good the walls and floors wherever reqd. WC pan with ISI marked white solid plastic seat and lid of make Hindware / Parryware / Cera / Jaguar.

Providing and fixing under counter wash basin with C.I / M.S brackets, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever reqd. including 15mm C.P brass pillar taps. While vitreous China wash basin size 630 x 450mm with single 15mm C.P brass pillar taps of make Hindware / Parryware / Cera / Jaguar.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32mm dia.

Providing and fixing 32mm dia C.P Brass trap.

Providing and fixing of 32mm C.P Brass waste coupling for wash basin of approved quality.

Providing and fixing unplasticized PVC connection pipe with brass unions 45cm length, 15 cm nominal bore

Providing and fixing C.P Brass angle valve for basin mixer and gyser pants of approved make conforming to IS : 8931 of make Jaguar / ESSCO / CERA. 15mm nominal bore.

Providing and fixing C.P Brass close Hole Basin mixer centre hole of approved quality and make, weighing 1.97 kg 15mm nominal bore of make Jaguar / ESSCO / CERA.

Providing and fixing C.P Jet with connection pipe of approved make.

Providing and fixing 100mm C.P Brass grating for gully floor or nahani trap.

Providing and fixing C.P brass shower rose with 15 or 20mm inlet of make Jaguar / ESSCO / CERA.

Providing and fixing C.P brass shower arm of approved make and length of make Jaguar / ESSCO / CERA.

Providing and fixing health faucet of approved make conforming to IS standards of make Jaguar / ESSCO / CERA.

Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standard and wighing not less than 690 grm (15mm nominal bore) of make Jaguar / ESSCO / CERA.

Providing and fixing C.P brass bib cock of approved quality conforming to IS ; 8931, short body type, 15mm nominal bore of make Jaguar / CERA / ESSCO

Providing and fixing towel ring C.P brass with necessary screws complete

Providing and fixing towel rail C.P brass complete with brackets fixed to wooden clats with CP brass screws complete 600mm towel rail with total length of 645mm, 78mm wide and effective height of 88mm weighing not less than 190 grms.

Providing and fixing Soap dish C.P brass with brackets and necessary screws complete. 138mm length, breadth 102mm & height 75mm, wt 106 grm

Providing installation and testing of geysor of approved quality and manufacture venus / bajaj or equivalent including all fittings complete.

a) 50 litres capacity

b) 35 litres capacity

Providing and fixing mirror of superior bevelled glass (of app. Quality) of 5.5 mm thick and of required shape and size, with moulded frame of approved make and shade, or with spacers.

Providing and fixing G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etc. Medium of make JINDAL / Prakash Surya

a) 20mm dia G.I Pipe

b) 25mm dia G.I Pipe

Making connection of GI distribution branch with GI main following size by providing and fixing Tee, including cutting and threading the pipe etc. complete 25-40mm nominal bore

Providing and fixing ball valve (Brass) of approved quality complete as per ISI mark

a) 25mm nominal bore

b) 20mm nominal bore

Providing and fixing GI union in GI pipes including cutting and threading the pipe and making long screws etc complete (new work) of make UNIK.

a) 20mm nominal bore

b) 25mm nominal bore

Providing and placing on terrace (at all floor levels) 3 layer polyethylene water storage tank ISI : 1270 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank, sintex, star having valid ISI license

Constructing masonry chamber with 75 class designation brick work in cement mortar 1:4 (1cement : 4 coarse sand) for underground C.I inspection chamber and bend. C.I cover with frame (light duty) 455 x 610mm internal dimensions, total weight of cover with frame to be not less than 38 Kg (Wt of cover 23Kg and Wt of frame 15Kg). RCC top slab with 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size), foundation concrete 1:5:10 (1cement : 5 Coarse sand : 10 graded stone aggregate 40mm nominal size, inside plastering 12mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished smooth with floating coat of neat cement on walls and bed concrete etc complete as per design. Inside dimesion 455 x 610mm and 45 cm deep for single pipe line with one or 2 inlets. With F.P.S bricks with crushed stone aggregate.

Providing and fixing square mouth gully trap grade "A" complete with C.I grating brick masonry chamber with bricks of class designation 75 and water light C.I cover wih frame of 300 x 300mm size (inside) the weight of cover 4.5 kg and frame 2.70 kg as per standard design. With F.P.S brick (non modular) of class designation 75.

Providing and fixing intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : fine sand) including testing of joints etc complete 100mm dia complete

Cutting holes upto 30 x 30cm in walls including making good the same with F.P.S bricks

Cutting holes upto 15 x 15 cm in RCC floors and roof for passing drain pipe etc and repairing the hole after injertion of drain pipe etc with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof.

Providing and fixing M.S stags and clamps for C.I / PVC pipes of diameter 100mm dia / 150mm dia

Providing and fixing PVC pipes of following dia with working pressure 6Kg / cm² of make finolex, supreme or equivalent.

a) 160mm (Rain water)

Providing and fixing PVC bend of required degree with working pressure 6kg/cm² with access door, insertion rubber washer complete of make finolex, supreme or equivalent.

Providing and fixing PVC plain bend of required degree with working pressure 6kg/cm² of make finolex, supreme or equivalent.

Providing and fixing PVC collar working pressure 6kg/cm² of make finolex, supreme or equivalent.

Making Chases upto 7.5 x 7.5 cm in walls including making good and finishing with matching surface after housing G.I pipe etc.

Labour Charges for fixing of GI / PVC / pipes including making of chase in brick masonry and making good the same, inside bath / wc complete except fixing of seat, angle valves, cistern, mixer, PVC connection etc Material (G.I pipes / PVC pipes available at site) incl. cost of all materials like cement, sand, bajri etc. The bidder will quote labour alongwith material like cement, sand & bajri.

Labour charges for fixing of GI pipe lines to walls / ceilings / floor including labour charges for GI fittings clamp joints, testing and making good the surface (material available at site) The bidder will quote labour charges alongwith material like cement, sand, bajri, solution etc.

Labour charges for laying PVC pipe incl. handling of pipes at site including cost of pipe jointing (PVC pipes available at site) The bidder will quote labour charges alongwith material like solution, cement, sand, bajri etc.

Labour Charges for fixing of (PVC fittings available at site). The bidder will quote labour charges alongwith material like cement, sand, bajri, solution etc.

a) Door Tee 110mm

b) P-Trap 110mm

c) Y-Tee 110mm

Making Khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over PVC sheet finished with 12mm cement plaster 1:3 (1cement : 3 coarse sand) and coat of neat cement, rounding the edges and making finishing the outlet complete.

Providing and laying in position cement concrete of specified grade excluding cost of centring and shuttering 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40mm) crushed.

Honey comb brick work 10/11.4 cm thick with bricks of class designation 75 in cement mortar 1:4 (1cement : 4 coarse sand)

Supply & filling of brick bats into pit complete

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality, colour.

a) 20mm nominal size with dimensions (69 x 43 x 43mm) weighing not less than 45 grm

b) 25mm nominal size with dimensions 85 x 51 x 51 mm weighing 38 grm

10 cm thick (average) mud phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35kg / cum of earth and gobri leaping with mix 1:1 (1clay : 1 cowdung) and covered with machine moulded tile bricks of class designation 100 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat

Labours engaged for cleaning the whole complex building during handover / visits purpose for G+4 including periphery inlcuding supply of cleaning material such as harpic, detergent, collin, brooms, mops all complete . (Bidders are advised to visit site before quoting for the item)

Providing gola 75 x 75mm in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 stone graded aggregate 10mm) and downgrade including finishing with cement mortar 1:3 (1cement : 3fine sand) as per standard design in 75 x 75mm deep chase.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying. A) after surface treatment, first layer of slurry of cement @ 0.488 kg / sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of fibre glass cloth when the first layer is still green - overlaps of joints of fibre cloth 10cm. c) Third layer of 1.5mm thickness consisting of slurry of cement @ 1.289 kg / sqm mixed with water proofing cement compound @ 0.670 kg /sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into grooved in parapet all around.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than A.C 10 as per IS 1858) transparent or dyed to reqd. colour or shade with necessary screws.

a) 75 x 63 x 3.2mm

b) 100 x 63 x 3.2mm

Providing and fixing ISI marked aluminium Tower Bolts anodised (anodic coating not less than A.C 10 as per IS 1858) transparent or dyed to reqd. colour or shade with necessary screws.

Providing and fixing ISI marked aluminium Sliding door bolts anodised (anodic coating not less than A.C 10 as per IS 1858) transparent or dyed to reqd. colour or shade with necessary screws.

Providing and fixing ISI marked aluminium hanging floor door stoppers (Single Rubber) anodised (anodic coating not less than A.C 10 as per IS 1858) transparent or dyed to reqd. colour or shade with necessary screws.

Providing and fixing ISI marked aluminium handles anodised (anodic coating not less than A.C 10 as per IS 1858) transparent or dyed to reqd. colour or shade with necessary screws.

Providing and fixing ISI marked aluminium Hooks and eyes (100mm) anodised (anodic coating not less than A.C 10 as per IS 1858) transparent or dyed to reqd. colour or shade with necessary screws.

Supply of door locks six lever with three keys of ISI marked of approved make

Labour Charges for fixing of doors and window shutters including cutting, grinding and fixing with necessary screws all complete.

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50 mtr and lift upto 1.5 Mtr (In all kinds of soil)

Clearing Jungle including uprooting of rank vegetation , grass, brush wood , trees and saplings of girth upto 30 cm measured at height 1 Mtr above ground level and removal of rubbish upto distance of 50 Mtr outside the periphery of the area cleared.

Carriages of Materials by M.T

a) Sand (40km avg. leet)

b) Aggregate (40km avg. leet)

c) Bricks (20km avg.)

Ghulam Mohammad Bhat