Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹61.3 L
EMD Value
₹1.2 L
Closing Date
19 Nov 2026, 4:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Rural Drinking Water and Sanitation Department
Smt. Nikita
Rejuvenation and Repairs of 78 Nos OHTs at various villages in Jewargi and Yadrami Talukas under SDP EAP
RWSSD/2026-27/WS/WORK_INDENT10965
RWSSD/2026-27/WS/WORK_INDENT10965
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Kalaburgi
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
As prime contractor at least one similar work such as of value not less than 50 percentage of amount put tender last 5 financial years 2021-22 to 2025-26not below rank of Executive Engineer
Tenderer shall have valid class - III KPWD
Assessed available tender capacity computed as per the formula in section 3.6
after reading the terms and conditions as per the bid documents. submit the bidders declaration on a letterhead.
In any TWO financial year out of last 5 financial years 2021-22 to 2025-26 Turn over Certificate Certified by Chartered Accountant with UDIN Number compulsory
Assessed available tender capacity computed as per the formula in section 3.6
₹1,540
₹1.2 L
19 Nov 2026
5 Nov 2026
20 Nov 2026
12 Nov 2026
Rejuvenation and Repairs of 78 Nos OHTs at various villages in Jewargi and Yadrami Talukas under SDP EAP
Work 1: Repairs of OHTs at Andola-3 and Jainapur-1 village in Jewargi Taluka (4 OHTs, A.A. Sl. 26, Jewargi estimates: 1 x type A, 1 x type B, 1 x type C, 1 x type D) - Providing and fixing hand rail o...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 2: Repairs of OHTs at Ankalaga-1, Ankalaga Tanda-1, Hanchinal SN-1, Itaga-1 and Mogan Itaga-1 village in Jewargi Taluka (5 OHTs, A.A. Sl. 27, Jewargi estimates: 1 x type A, 2 x type B, 1 x type C...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 3: Repairs of OHTs at Jeratagi-1, Ballundagi-1, Belur-1, Billad-1 and Sidnal-1 village in Jewargi Taluka (5 OHTs, A.A. Sl. 28, Jewargi estimates: 1 x type A, 2 x type B, 1 x type C, 1 x type D) -...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 4: Repairs of OHTs at Hullur-1, Narayanpur-1, Harnal K-1, Bhosaga B-1 and Bhosaga K-1 village in Jewargi Taluka (5 OHTs, A.A. Sl. 29, Jewargi estimates: 1 x type A, 2 x type B, 1 x type C, 1 x ty...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 5: Repairs of OHTs at Briyal B-1, Briyal K-1, Rampur-1, Honnal-1 and Hotinamadu-1 village in Jewargi Taluka (5 OHTs, A.A. Sl. 30, Jewargi estimates: 1 x type A, 2 x type B, 2 x type D) - Supplyin...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Work 6: Repairs of OHTs at Malla.K-1, Malla.B-1, Naribol-2 and Rajwal-1 village of Jewargi Taluka (5 OHTs, A.A. Sl. 31, Jewargi estimates: 1 x type A, 2 x type B, 2 x type D) - Supplying and fixing DI...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Work 7: Repairs of OHTs at Hipparga SN-2, Sonna-2 village of Jewargi Taluka (4 OHTs, A.A. Sl. 32, Jewargi estimates: 1 x type A, 1 x type B, 1 x type C, 1 x type D) - Providing and fixing hand rail of...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 8: Repairs of OHTs at Mandewal-2, Mandewal Tanda-1, Mahoor-1 and Yankanchi-1 village of Jewargi Taluka (5 OHTs, A.A. Sl. 33, Jewargi estimates: 1 x type A, 2 x type B, 2 x type D) - Supplying and...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Work 9: Repairs of OHTs at Kolkur-2, Rasanagi-1 and Harwal-1 village of Jewargi Taluka (4 OHTs, A.A. Sl. 34, Jewargi estimates: 1 x type A, 1 x type B, 1 x type C, 1 x type D) - Providing and fixing h...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 10: Repairs of OHTs at Kattisangavi-1, Madri-1 and Yanagunta-1 village of Jewargi Taluka (3 OHTs, A.A. Sl. 35, Jewargi estimates: 2 x type B, 1 x type C) - Providing chain link fencing 50mm size ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Work 11: Repairs of 3 Nos OHTs at Ganwar-3 village in Jewargi Taluka (3 OHTs, A.A. Sl. 36, Jewargi estimates: 1 x type B, 1 x type C, 1 x type D) - Providing chain link fencing 50mm size of 8 guage pr...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 12: Repairs of 2 Nos OHTs at Yalwar-2 village in Jewargi Taluka (2 OHTs, A.A. Sl. 37, Jewargi estimates: 1 x type C, 1 x type D) - Providing and fixing MS ladder between landings, 45 cms wide usi...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 13: Repairs of OHTs at Khankandaki-1, Khankandaki Tanda-1, Ijeri-1, Sathkhed-1 and Maradagi SM-1 village of Yadrami Taluka (5 OHTs, A.A. Sl. 38, Jewargi estimates: 1 x type A, 2 x type B, 1 x typ...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 14: Repairs of OHTs at Aralagundagi-2, Anajagi-1, Balbati-1 and Kadakol-1 village in Yadrami Taluka (5 OHTs, A.A. Sl. 39, Jewargi estimates: 1 x type A, 2 x type B, 1 x type C, 1 x type D) - Prov...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 15: Repairs of OHTs at Malli-2, Nagaralli-1, Nagaralli Tanda-1 and Wadagera-1 village in Yadrami Taluka (5 OHTs, A.A. Sl. 40, Jewargi estimates: 1 x type A, 2 x type B, 1 x type C, 1 x type D) - ...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 16: Repairs of OHTs at Ainapur-1, Dumadri-1, Biralhissa-1 and Kuralagera-2 village of Yadrami Taluka (5 OHTs, A.A. Sl. 41, Jewargi estimates: 1 x type A, 2 x type B, 1 x type C, 1 x type D) - Pro...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 17: Repairs of OHTs at Karkhihalli-1, Wastari-1, Bennur-1 and Harnal.B-1 village of Yadrami Taluka (4 OHTs, A.A. Sl. 42, Jewargi estimates: 1 x type A, 1 x type B, 1 x type C, 1 x type D) - Provi...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Work 18: Repairs of OHTs at Konasirasagi-1, Kukanoor-2 and Kummansirasagi-1 village of Yadrami Taluka (4 OHTs, A.A. Sl. 43, Jewargi estimates: 1 x type A, 1 x type B, 1 x type C, 1 x type D) - Providi...
Providing and applying composite waterproofing compound as impregnate only on wet surfaces to arrest leaks in surfaces such as roof cealing, internal and external walls, flooring and other surfaces ap...
Ladder inside the container: Providing anodised ladder using 65mm x 32mm x 3mm C section for ladder side channel x 25mm dia., fluteL pipe for Rungs at 250 mm c/c leather fixed at an angle of 70 deg to...
Providing and fixing 60x60cms M.S. inspection door with necessary M.S. frame made out of M.S. angle 50x50x6mm and M.S. shutters of 31.5mm or B.G.10 thick with hinges on top and locking arrangement, pa...
Providing chain link fencing 50mm size of 8 guage properly stretched between existing rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4x1.50= 6.00 s...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Providing 50 mm dia heavy class CI flanged and socket tail pieces confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. [KRDWS ...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid_Document_KW-2_OHT_093L_SDP-Jwg_Jewargi_OTHERS.docx
Tender Document • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .