Construction of Garbage Yard and concrete road near treatment plants at ACTREC

Amount

Excavation mechanically (using excavators like JCB /Poclain/with bucket) in all types of soil, including murrum, soft rock for foundations, wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well including shoring and strutting, bailing out water/pumping off water if required, removing and stacking or Disposing simultaneously the excavated soil anywhere within the ACTREC Campus and/or spreading soils in layers for site development. All complete as per specification and as directed by the Engineer-in charge. upto 2.5 m Depth

Providing and laying in position ready mixed M20 grade plain/reinforced cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, scaffolding, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineerin-charge. (M20 grade at all locations)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 at all levels in english bond in all shapes and sizes in 1:4 cement mortar as per the instruction of Engineer incharge.

Providing and laying in position reinforced cement concrete of specified grade including the cost of centering and shuttering - Work at all level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) - Pedestals, pit edges, podium and enclosure for landscaping plants.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, and two coat oil paint of approved colour including gate with railing, hinges of appropriate strength and sliding rail all complete as per the instruction of Engineer incharge.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m² with colouring all complete as per the instruction of engineer incharge

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam mixture (Rate including) (WMM) (as per specification) including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating (power floater and trowel), brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. Cement content considered in this item is @ 330 kg/cum. The rate also include providing and fixing of Shuttering/channels/Scaffolding as per the requirement.

Providing and fixing joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. 20mm thick expansion joint to be considered. Cross Sectional area of road shall be considered. Also Making of Construction/Contraction/Dummy Joint having size 5mmx50mm by using concrete cutter machine & filling the same by using bituminous sealing compound.

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement with 20mm thick plaster as per the instruction of engineer incharge.

Providing & Applying one / two coats of primer & thereafter two coats of paint as mentioned First quality to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. filling up crevices and levelling with waterproof putty / plaster of paris of necessary to obtain smooth surface etc. complete job including removal of stains, painting spots on floors etc. as to the entire satisfaction of engineer in charge :With Acrylic emulsion paint two coats of primer and two coats of paint. ( Rate inclusive of scafflolding, labour charges, ladder etc.)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Steel for dowel.

CONCRETE BREAKING: Breaking of the existing concrete/brickwork by chiselling at all level including scaffolding and staging and the work shall be carried out so as to cause minimum inconvenience to hospital activity including cost of all material, labour, tools etc. carting away the debris out of hospital premises all complete as specified and directed. Rates also includes core cutting in concrete

Compaction of the available earth work under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density) in layers of 200mm by using water to achieve optimum moisture content and Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. The ground to be levelled as per the instruction of Engineer incharge.

Supply and fixing of 3core 4sqmm armoured copper conductor cable PVC insulated ISI mark including 01 run of GI bare wire of 8 SWG from STP panel to garbage yard distribution board including all fxing accessories like cable glands , copper lugs , clamps, rawal plugs as required at site,

Supply and fixing of 6 way SPN distribution board ( 6 + 2 ) , 32A DP MCB 01 Nos , 6A SP MCB 06 Nos including all internal links and fixing acessories and earthing arrangements

Supply and fixing of 70W, LED Flood light fitting, IP-65 outdoor type with all required fixing accessories like clamps , glands , lugs etc.

supply and fixing of 3 x 2.5 sq. mm PVC flexible cable through PVC Conduit pipe including all fixing accessories required.

Supply and Fixing of PVC conduit/ Truncking 25mm size of PVC rigid conduit with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc.

Supply and fixing of 15 A,5 pin, switch socket modular surface type

SITC of 450mm Metal body exhaust fan with frame , works includes making necssary arrangements in shade for fixing of fan and final finishing with painting of the same

MARUTI ENTERPRISES

B G CONSTRUCTIONS

lalit constructions