COMPREHENSIVE REPAIR IN MD ACCN IN ZONE A AREA UNDER AGE B/R-I UNDER GE (CENTRAL) KHADKI.

NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed.

Taking down shutter of any description but exceeding 2 Sqm each complete all as specified and as directed.

Supply and fix pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and as directed.

Supply and fix pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and as directed.

Material and labour for providing cement concrete type C-1 (1:3:6) (using 20mm graded aggregate) as in hold fast, backfill in pressed steel door frame,complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class hard wood factory maid plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces. The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed.

Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without sach bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge, etc size of shutters including wire mesh as specified in SSR-I, complete all as specified and as directed.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. square tube etc complete all as specified and as directed.

Supply and fix for factory made solid PVC Moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc,including taking down old u/s windows and making good the wall for fixing new window, complete all as specified and as directed.

Supply and fix aluminium louvered ventilators ) of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs,including taking down old u/s ventilator and making good the wall for fixing new window complete all as specified and as directed .

Supply and fix aluminium powder coated grill (DECO grill) fixed to aluminium door/window/ventilator frame including all fixing arrangement including channels, screws U of F section etc complete all as specified and as directed.

Supply and fix butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and as directed.

Supply and fix 140mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

Supply and fix aluminium (Die cast) door closure hydrauically regulated, designation, No-2, universal type suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60Kg and fixed, complete all as specified and as directed.

Supply and fix extruded aluminium alloy handles, fabricated type, anodised of size 150mm fixed with screws complete all as specified and as directed .

Supply and fix aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed.

Supply and fix aluminium anodised, barrel tower bolt 150mm long, powder coated of extruded section and fixed complete all as specified and as directed.

Supply and fix extruded aluminium handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed.

Supply and fix for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Material and labour for repairing any type of aluminium/wooden door shutter and refixing in the same opening after resecuring its frame work by means of tightning with new screws of by aluminium angle, cleat and other connected work complete all as specified and as directed.

Supply and fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

Supply and fix plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed.

Supply and fix in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and a directed.

Material and labour for preparation of new or previously untreated steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc including taking down complete all as specified and as directed.

Supply and fix 40mm width of flaps (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

Supply and fix 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as direccted.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for framed work as in doors or gates of angle or other section (i.e flat/tubular) with gusset plates, rails, braces of Fe-410-W (Gde-E-250) quality-B, etc. complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges/holdfast or steel hanging door fittings in plain cement concrete (1:2:4), type B-1 (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed.

Material and labour brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 in any position, complete all as specified and as directed.

Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:6 with finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed.

Supply only Liquid water proofing compound complete etc all as specified and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including priming, necessary scaffolding ladder etc complete all as specified and as directed.

Material and labour for preparing new plastered surface of walls and applying two coat of oil bond distemper of alkali resistant primer at any height including necessary scaffolding ladder etc complete all as specified and as directed.

Material and labour for rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia, fins, parapet etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement / lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces applying 2 mm thick of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper over coat of primer upto height 10 mtr etc complete all as specified and as directed.

Material and labour for vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile 600mm x 600mm /600mm x 1200mm over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per ser item No 49 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per ser item No 51 above but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles external/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and as directed.

Material and labour for granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including polishin, grinding, moulding , dismantling and removing the debris outside the defence land complete all as specified and as directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment / surface and material and labour for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. (Make: PIDILITE or equivalent) complete all as specified and as directed.

Material and labour for making hole and fixing the metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and as directed. NOTE :- This item is catered only for Material and labour for fixing the metallic packer

Material and labour for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as directed and as per the sample done at ground level complete all as specified and as directed.

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed.

Supply and fixin repairs for 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor incl taking down etc complete all as specified and as directed.

Supply and fixfor 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.

Supply and fixfor PVC floor trap 75mm complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall etc incl taking down complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specified and as directed.

Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specified and as directed.

Material and labour for disconnecting of existing PVC tank of capacity exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specified and as directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.

Material and labour for disconnecting of existing PVC tank of capacity Exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specified and as directed. (a) Dewatering & removing all settled slit,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.

Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specified and as directed.

Supply and fix in repairs for plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specified and as directed.

Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as specified and as directed.

Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specified and as directed.

Supply and fix in repairs of PVC syphon with complete set any type/any size as per site requirement) for low level PVC cistern of 10 Ltr capacity as per sample complete all as specified and as directed.

Supply and fix in repairs for PVC flush pipe/Bend (long/short) for low level PVC flushing cistern 40mm bore etc complete all as specified and as directed.

Supply and fix in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and as directed.

Supply and fix in repairs for chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and as directed.

Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed.

Supply and fix in repair wall mixture three in one with complete accessories complete all as specified and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed.

Supply and fix in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) all as specifed and as directed.

Supply and fix in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.

Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specified and as directed.

Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I incl taking down complete all as specified and as directed.

Supply and fix in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I incl taking down complete all as specified and as directed.

Supply and fixin repair sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste , including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and paths laid in alternate bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and as directed.

Material and labour for rendering 10 mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement, finishing even and smooth without using extra cement with and including water proofing compound over RCC slab, complete all as specified and as directed.

Material and labour for applying oil bound bitumen primer @ 0.3 kg/Sqm, over RCC slab, and providing and laying 3 mm thick APP modified water proofing memberane, weighing not less than 3.00 kg/sqm, reinforced with non woven polyester reinforcement matt weighing not less than 160 gm/Sqm polyester core, having softening point not less than 150°C, longitudinal tensile strength not less than 650 N/ 5 cm, tearing streangth of 180 N / 5 cm, torch application method, with a overlap of 100mm at the sides and 150mm at the ends and sealing and applying a coat of solar reflective aluminium paint @ 0.2 Kg/Sqm on membrane surfaces complete including carrying out 24 hrs ponding test over the complete treatment omplete all as specifed and as directed.

Supply and fix in repair E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down old/ existing ceiling boards any type (fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as specified and as directed.

Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Material and labour for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed