Karnataka

Active

Surety Bonds Accepted

Works

Buildings

Improvement works to EE(MSP) office and other allied works at Hosangadi.

Karnataka Power Corporation Limited

KPCL Executive Engineer CIVIL Office SVP Hosangadi | Udupi, Karnataka

Amount: ₹40.6 LCloses: 26 Sept 20264d left

Timeline

Published11 Sept 2026
Closes26 Sept 2026
Bid Opening28 Sept 2026

Tender Value

₹40.6 L

EMD Value

₹81,200

Closing Date

26 Sept 2026, 11:30 am4d left

Tender Inviting Authority

Office Inviting Bids

Karnataka Power Corporation Limited

Contact Person

Ravi Praksh M

Mobile Number

Work Description

Improvement works to EE(MSP) office and other allied works at Hosangadi.

Tender Information

Tender ID

KPCL/2026-27/BD/WORK_INDENT4769

Reference Number

KPCL/2026-27/BD/WORK_INDENT4769

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KPCL Executive Engineer CIVIL Office SVP Hosangadi

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Technical Bid

RequiredCommunication address and contact details

RequiredDeclarations in the bid document shall be duly signed and submitted

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

DECLARATIONS: The bidder shall submit the duly signed declaration furnished in the bid document.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of Karnataka public procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The original documents should be produced for verification at any stage of tender process as and when sought for, failing which, the bids are liable for disqualification.

Rates shall be quoted in price schedule in the website itself.

The tender document is part and parcel of the agreement Condition.

Conditional tenders are liable for rejection.

The successful bidder shall give an undertaking that they would abide by the provisions of the Employees Provident Fund Act.

The bidder shall obtain insurance coverage for all the workers deployed for this work.

The bidder shall quote his rates exclusive of GST but inclusive of all other applicable taxes, levies, duties and Building Workers Welfare Cess at 1% etc., as per the latest GoK and GoI prevailing as on the last date of submission of bid.

The bidder shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time.

KPCL shall recover the Income Tax, building workers welfare cess, at the prevailing applicable rates.

The bidder should take into account the prevailing royalty charges while quoting their rates. The successful bidder shall strictly adhere (GoKcircular 07.11.2023) to Rule 36 & 42 of Karnataka Mineral Concession Rules 1994 & its amendments thereof. If the successful bidder/agency fails to furnish documents related to remittance of royalty charges for Coarse aggregate, Fine aggregate, murrum etc., as per Rule 44(4) of Karnataka Mineral Concession (amendment) Rules 2023, prevailing royalty charges along with following penalty will be recovered from the work bills. a)A penalty of 5 times the royalty amount & additional payment (AP) of 40% royalty amount to Department of mines and Geology.b)A penalty of 10% of royalty amount and the same will be transferred to District Mineral Foundation Trust.

The bidder should maintain register of workers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved.

Bidder should have independent PF code. The bidder shall remit PF of labourers to Contractors permanent PF code number only and not to the KPCL PF sub code.

In case the dates notified above declared as holiday, the immediate next working day will be reckoned.

If the Bidder makes any alterations in the conditions of the contract or puts any condition of his own, such tenders are liable for rejection.

The bidder shall register himself under section 7 and their workers who will be engaged for the works under section 12 of the Building and other construction workers (Regulation of employment & conditions of services) Act 1996.

Corrigendum/modification/corrections, if any, will be published in the web site only.

The bidder shall quote item rates on the basis of prevailing market rate.

Bidders shall give declaration regarding payment of fair and reasonable wages which shall not be less than the minimum wages fixed by the government from time to time to the labours working under the contractor in the contract undertaken by him. Failing which, the bids are liable for rejection.

The successful bidder shall make payment of fair and reasonable wages which shall not be less than the minimum wages fixed by the Government of Karnataka from time to time to the labours working under the contractor in the contract undertaken by him.

Any variation in labour wages made by the Government from time to time shall be borne by the agency. Any claim towards this variation will not be entertained by KPCL.

The successful bidder shall obtain ESI coverage for all the workers deployed for this work if required.

KPCL reserves the right to verify any information/document furnished by the bidder should the circumstances so warrant in the overall interest of the Corporation. In case the information or the documents furnished are found to be incorrect or invalid, then tenders of such bidders will be cancelled and the EMD furnished by such bidders will be forfeited.

Any revision in GST rates during execution of work will be paid to the contractor by KPCL or recovered from the bills of contractor.

In case of death of a contractor after executing the agreement/ commencement of the work, his legal heir (to be intimated at the time of execution of agreement by the successful contractor), if any eligible registered contractor and willing, can execute and complete the work at the accepted tender rates irrespective of the cost of the work after obtaining approval from competent authority.

The successful bidder shall quote Buy back value of corrugated AC Sheets including cost of all labour, shifting and clearing the site etc., and shall raise self purchase buy back memo (inclusive of all applicable taxes) at the time of submission of bill.

The successful bidder shall furnish Contract performance guarantee (CPG)/Security deposit (SD) in the form of DD/NEFT or e-Bank Guarantee from any schedule bank acceptable to the Corporation, Insurance Surety Bonds issued by Insurance Company authorized by Insurance Regulatory and Development Authority of India within 20 days of receipt of Letter of Intent through e-portal.

Contract performance guarantee (CPG)/Security deposit (SD) shall be equivalent to 5% of the Contract amount and should be valid for 90 days after the date of completion of defect liability period.

Work completion period is 4(Four) calendar Months excluding Monsoon. Defect liability period for the work is 12 months from the date of completion of work. Contract period is 16 months (i.e Work completion period plus Defect liability period).

If tenderer has engaged in corrupt or fraudulent practice, action shall be initiated finance department, Government of Karnataka Notification No.FD884 Exp-12/2019, Bengaluru, dated 7th May 2020.

Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Civil) Hosangadi, Kundapura Tq , Udupi District -576282 during office hours. Mobile-9449598843.

Technical Criteria

Past Experience

Each tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24,2024-25 & 2025-26, satisfactorily completed (at least 90% of the contract value) as a prime contractor at least any One Civil Work of value not less than Rs. 20.30 Lakhs during the preceding five financial years. The past experience should be supported by original scanned copy of the Work done certificate issued from state/central Government/Government under taking from the officers not below the rank of Executive Engineer. (Work done of previous financial years shall be given weightage of 10% per year to bring them to the price level of the financial year in which the tender is invited)

Work Done Certificate

Capabilities of Vendor

List of existing commitments and ongoing work (B value of assessing Tender capacity) Qualifcation information 1.4 (A).

Others -- Section-3 of bid document

Details of works for which tenders are already submitted Qualifcation information 1.4 (B)

Others -- Section-3 of bid document

Tender capacity (AxNx2.5 - B)where, A- Maximum value of works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N- Number of years prescribed for completion of the works for which tenders are invited 0.33 year.B -Value, at 2026-27price level, of existing commitments and on-going works to be completed during the next 0.33 year (period of completion of the works for which Tenders are invited)

Others -- Tender capacity shall be duly flled and signed in the letter head

Financial Status

Each tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24,2024-25 & 2025-26, Achieved in at least Two (02) financial years an average annual financial turnover Rs. 40.59 Lakhs in the last 05 (Five) financial years. Turnover certificate, duly certified by chartered Accountant (along with UDIN No) shall be furnished. (Financial turnover of previous financial years shall be given weightage of 10% per year to bring them to the price level of the financial year in which the tender is invited)

Audited CA Certificate of Annual Turnover

Others

Certificate of registration in KPWD Class III & above.

Others -- Certificate of registration in KPWD Class III & above.

Income - Tax PAN.

Others -- Income - Tax PAN CARD

Declarations (shall be duly signed).

Others -- Declarations (shall be duly signed).

ESI Registration Certificate

Valid ESI certificate

Labour certificate

Labour Certificate

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

GST registration certificate.

GST Registration

PF Registration certificate (independent PF Code).

Valid EPF Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,020

EMD Fee Amount

₹81,200

Important Dates

Last Activity

11 Sept 2026

Published

11 Sept 2026

Bid Opening

28 Sept 2026

Download Ends

25 Sept 2026

BOQ Preview

•

Improvement works to EE(MSP) office and other allied works at Hosangadi.

•

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.- Asbestos cement sheet ---- In ...

•

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

•

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of engi...

•

Demolishing cement concrete of Nominal mix 1:3:6 or richer mix manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-incharge. ----...

•

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

•

Door Frame with shutters-Providing, making and fixing of factory made external door (make TATA Pravesh/AHLADA/equivalent) Frame with shutter, Plain/Embossed wood finish frame size of single rebate pro...

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 10 mm ---- ...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of Size 62mmx100mm comprising of virgin PVC polymer of K val...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Earth work excavation by manual means for drains,canals, waste weir draft,approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, inclu...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead ---- In accordance with ...

•

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...

•

Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per d...

•

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2...

•

Providing and fixing PTMT bib cock of approved quality and colour-15 mm nominal bore, 165 mm long, weighing not less than 110 g ---- In accordance with finance department circular No FD 417EXP-12/2024...

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing in position 25mm UPVC gate valve of approved quality including cost of all materials, labour and HOM of equipments with all leads complete etc., as directed by the Engineer. ---- ...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and fixing PTMT grating of approved quality and colour.-100 mm nominal dia ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Casement Window frame with shutter- Providing,making and fixing of factory made casement window with inside Fixed grill (make TATA Pravesh / AHLADA/EQUIVALENT) Frame with shutter, Plain/Embossed wood ...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel,...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...

•

Providing and fixing UPVC gutter Gutter (600 mm over all girth) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized ...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

•

Providing and filling brick aggregates 25mm (Nominal) around Soak pit / Septic tank periphery in vertical layer including all materials cost, labours cost etc., as directed by Engineer-in-charge. ----...

•

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing.

•

The rate includes the cost of material, l...

•

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing and supplying man power for shifting luggage/materials safely using department vehicle to designated place including labours with all lead & lift as directed by engineer - incharge. ---- In ...

•

Supplying and fixing regular MCB distribution board double door 8Way SP &N on wall/wood board / Flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity...

•

Supplying and fixing 15"x12"x2" polished wooden board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tappered inverted wooden plug...

•

Supplying of on load change over switches 4 poles, AC-63A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution).Make:Legrand/L&T/Schneider. ---- In accordance with fi...

•

Supplying.fixing and wiring miniature circuit breakers 32 amps DP on existing MCB distribution boards using necessary fixing materials and C type curve,indicator ON/OFF,energy cross-3 with short circu...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 32-40A 2 pole ,240/450V upto 30mA sensitivity on existing wood/ panel board..Make:Legrand/L&T/Schneider. ---- In accordance with fi...

•

Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and c...

•

Supplying heavy gauge PVC Conduit Pipe 25mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ceme...

•

Supplying heavy gauge PVC Conduit Pipe 40mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ceme...

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager. 9U with 450mm depth ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders a...

•

Supplying & Fixing of Power strip ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quotes excluding GST

•

Supplying and and fixing of shelf ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quotes excluding GST

•

Supplying & Fixing of 2 Mtr Cat 6 Patch Cable with suitable connectors ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the fi...

•

Supplying fixing of Network Switches 24 port 10/100 Switch ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quot...

•

Fiber to Ethernet Media Converter : 10/100/1000 Mbps (SC type, Single fibre, single mode) Make: D-Link, TP Link, Digisol. ---- In accordance with finance department circular No FD 417EXP-12/2024, dat...

•

Supplying and drawing PVC flexible five pair telephone unarmoured tinned copper cable..Make: Polycab/Finolex/Vguard. ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09....

•

Supplying and drawing UTP-CAT 6E LAN cable..Make:D link ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quotes ...

•

Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination 10pair ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidder...

•

Supplying & fixing of Single I/O (LAN) socket with back box . ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial q...

•

Extra for groove cutting In brick wall (Upto 50mm conduit In brick wall) to the suitable depth for concealing of conduit pipe and plastering, finishing up to wall surface complete. ---- In accordance ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring using 2.5 sqmm wi...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Supplying And fixing/replacing of 16A Three Pin Top on existing switch board.make:GM/Cona/Anchor ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are...

•

Supplying and fixing of modular 6A One Way switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 . make:GM/Cona/Anchor ---- In accordance with finance department c...

•

Supplying And fixing/replacing of 6A Bakelite Ceiling Rose electrical accessories on existing switch board . make:GM/Cona/Anchor ---- In accordance with finance department circular No FD 417EXP-12/2...

•

Supplying And fixing/replacing of 6A batten holder electrical accessories on existing switch board , make:GM/Cona/Anchor ---- In accordance with finance department circular No FD 417EXP-12/2024, date...

•

Supplying of 4feet -PVC Batten with integrated LED tube 22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80%. Power Input: 220-240V@ 50/60...

•

Supplying and fixing of Telephone Socket modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 ---- In accordance with finance department circular No FD 41...

•

Supplying and fixing of 6A Bell Push modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 ---- In accordance with finance department circular No FD 417EXP...

•

Supplying and fixing one of 230 V bell or buzzer and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws. ---- In accordance with finance department circular N...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying & fixing of retrofit type - LED bulb 15W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy greater than 80% lumen per W, life greater than 25000 b...

•

Supplying and fixing of modular Stepped fan regulator two module with indication on existing modular switch plates as per IS 3854 and IS 1293 .Make:GM/Cona/Anchor ---- In accordance with finance depar...

•

Supplying and fixing of modular 16A One Way switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 make:GM/Cona/Anchor ---- In accordance with finance department ci...

•

Supplying and fixing of modular 16A Universal Socket & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.. Make:GM/Cona/Anchor ---- In accordance with finance departmen...

•

Supplying and fixing of modular 6A three way Socket & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.. make:GM/Cona/Anchor ---- In accordance with finance department...

•

Supplying and fixing 1-2way flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/St...

•

Supplying and fixing 3way flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Ston...

•

Supplying and fixing 4-5way flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/St...

•

Supplying and fixing 6way flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Ston...

•

Supplying and fixing 8way flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Ston...

•

Supplying and fixing 12way flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Sto...

•

Supplying and fixing 16way flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Sto...

•

Supplying and fixing 1 to 2 module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on ...

•

Supplying and fixing 3 module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...

•

Supplying and fixing 4 module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...

•

Supplying and fixing 6 module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...

•

Supplying and fixing 8 module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...

•

Supplying and fixing 12 module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the ...

•

Supplying and fixing 16 module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

supply and fixing Extra length of Gl pipe of class B 19mm for down rod. ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the f...

•

Supplying stringing and wiring PVC insulated and sheathed 650/1100 " v" class aluminium conductors to 4mm dia GI messenger wire with 2 break insulators at either end and each insulated conductor suppo...

•

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...

•

Pole Mounted Fibre Glass Reinforced Aerial Fuse Board FGRP Aerial Fuse Board 30 Amps - 4 Way (Dwg No. BESCOM/GM/QS&S/24 Dtd 24.11.2018) ---- In accordance with finance department circular No FD 417EXP...

•

Blank plate GM/Havells/anchor. ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quotes excluding GST

•

Bentonite clay slurry for earthing in 50 Kg Bag. ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quotes excludi...

•

Charges for fabrication and fixing of MS short pole including material and labour as per site requirement. ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, ...

•

Supplying And Fixing "S" Hook made out of 14 mm dia M.S. Rod. ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial q...

•

Supplying And Fixing M.S. Rafter Clamp Set made out of M.S.Flat & 14 mm M.S. rod. ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to su...

•

Fixing of ON load change over switch ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quotes excluding GST

•

2 pin adaptors for light fittings ---- In accordance with finance department circular No FD 417EXP-12/2024, dated 09.08.2024, bidders are required to submit the financial quotes excluding GST

•

1.1 kV, XLPE or Heat resistant PVC insulated 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm), PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thic...

•

Buy back value of retrievable/useful corrugated AC Sheets of MSP office at hosangadi including cost of all labour, shifting and clearing the site etc., with all lead and lifts. ---- In accordance wit...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

MSP Bid document.docx

Tender Document • 1.44 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Surety Bonds Accepted

Works

Buildings

Improvement works to EE(MSP) office and other allied works at Hosangadi.

Karnataka Power Corporation Limited

KPCL Executive Engineer CIVIL Office SVP Hosangadi | Udupi, Karnataka

Amount: ₹40.6 LCloses: 26 Sept 20264d left

Timeline

Published11 Sept 2026
Closes26 Sept 2026
Bid Opening28 Sept 2026