Repair and renovation of existing open shed for high rise materials with unloading platform along with electrical items for improving safety and handling of materials with wiring and lighting arrangement and associated work at T.C.S, Jamshedpur

Wiring from lighting panel to switch boards, from switchboard to junction boxes for light points with 2.5/4.0/6.0 mm2 copper wire as per technical specification, complete in all respect. 1.5 mm2 copper wire (green) will be used for earthing inside conduits, supply & installation as per requirement at site (as per E.I. Charge)

PVC/XLPE insulated PVC sheathed heavy duty, armoured electrical cable laying with aluminium conductor for working voltage up to and including 1100 volts 16sq mm ,4 core

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumenand G.I. limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curvedsurfaces), excluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m².

Labor for fabrication/welding erecting, hosting and fixing in position structural steel work in R.S Joist ,H-Beam Channel Angle, Flat, Plate with applying a priming coat of red lead paint and plastic emulsion paint all complete as per direction of engineer in charge.

Supply, Erection, Testing & Commissioning of Chemical Earthing as per direction of Engineer in charge.

Main switch board 200A, 3- ph, 50 Hz, 415 V

S.I.T.C of 50/60W LED flood lighting luminaries with pressure die cast housing and toughened glass cover ,IP-66 protection in existing pole /pipe for supply voltage 90~270 V AC 50 Hz Luminaries shall be confirm to IS: 10322 part-5/ section 5 and shall be complete with all necessary accessories as required Make- CGL / BAJAJ / SYSKA / PHILIPS (for inside surrounding of shed)

S.I.T.C of 150/160 W LED flood lighting luminaries with pressure die cast housing and toughened glass cover ,IP-66 protection in existing pole /pipe for supply voltage 90~270 V AC 50 Hz Luminaries shall be confirm to IS: 10322 part -5 / section 5 and shall be complete with all necessary accessories as required Make-CGL/BAJAJ/ SYSKA/PHILIPS (for outdoor surrounding of shed)

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m²

Special north light curves

Hiring of hydra/crane for big material shifting (before and after work) [For 8 hours (677.00 x 8 hours)]

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation, trenches, plinth, sides of foundation etc. complete for all lift.

(A) Providing and laying in position cement concrete of 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement-All work as per direction of E/I.

(B) Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I

(A) Providing designation 75 A brick work in in C.M (1:4) in foundation and plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15 mm depth curing taxes and royalty all complete as per building specification and direction of E/I

(B) Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water scaffolding taxes all complete as per direction of E/I

(C) Providing 1.5mm cement punning including curing carriage of water with all leads and lifts as per building specification and as per direction of E/I

(a) 1st quality paint of different shades

(b) Primer for steel work

(c) Painter class-II

Deployment of unskilled khalasi/Man power for clear the site, displacement (before work) & restacking the materials (after work) and other miscellaneous work at site as per direction of E/I.

Carriage of materials to work site through surface road etc all complete as per building specification and direction of E/I

A. Cement ( 0-10 km)

B. Sand (0-10km)

C. Stone chips(0-10km)

E. Bricks (0-10)

Sub-Total

GST @ 18% on Sub-Total

Total (Sub-Total + GST)

L.cess@1% on Total(mailto:L.cess@1%25%20on%20Total塹ᴻ䡿ⲯ嶂藄挧ꮥ)

Grand-Total (Total+L.cess)

Say Rs.

Amount in words:-