Repairing Renovation and Reconstruction of Chief Engineer Irrigation Office Building at Chandmari Ghy_3 under D and A for the year 2019_20

Amount

CIVIL WORKS

EARTH WORK Earth work in excavation for foundation trenched for walls, retaining wall, footings of column,steps,septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in returned filling, dressing, watering and ramming etc.and removal of surplus earth will all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level a) In ordinary soil

Earth/sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation forest royalty sales tax and other duties and taxes as may be necessary. (C) With river sand or silt (predominantly non-plastic) by trunk carriage including loading and unloading

Raising low site around the building with approved soil obtained by the truck carriage including breaking clods, dressing etc. complete including paying necessary forest royalty, sales tax, land compensation, municipal gate dees, if any monopoly duty etc.( profile measurement to be taken and 12.5% deduction for shrinkage to be made from toral quantity) ec. complete as directed and specified . (a) Within Guwahati city only

Jungle clearance including uprooting of vegitation , grass ,brush-wood , sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick work etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary, shall be measured and paid separately) : Using Mixture Machine a) In prop. 1:3:6 (1cement: 3sand:6 coarse aggregate) by volume

Providing laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. Of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete.

Providing and laying reinforced cement concrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (from work and reinforcement will be measured and paid separately). (A) In sub-structure up to plinth level-Using mixture machine Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick unto plinth level.

(B) Super-structure from plinth level upto 1st floor level. ii) vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band. c) M20 grade concrete

ii) Columns, pillars, posts struts, suspended floor,roof,landing,shelf and support, balcony , lintel, sill band, beam, girder, bressumer, cantilever, staircase including preparing of top surfaces and furnishing and nosing. c) M20 grade concrete

Extra over item no. 9&10 above for each subsequent floor or part thereof above the 1st floor level. (i) 1st floor

(ii)2nd floor

(iii) above 2nd floor

TIMBER SHUTTERING (FORMWORK) Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reonforced concrete and plain concrete work in : Foundation,footing,bases of column,pile cap, raft and mass concrete works etc.

b) Sides of tie beams, grade beams etc. at or below ground level. ii) Using 25mm thick plank.

PLYBOARD SHUTTERING (FORMWORK) Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shuttering, stutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for situ reinforced concrete and plain concrete work in: a) Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/ L etc. having plane vertical face.

b) Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. i) For depth not exceeding 1.0M

c) Flat surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like. i) Floors etc. upto 200mm in thickness.

e) Vertical ties,fins,sun breaker,louvers,bands,dropwalls etc..

f) Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

g) Extra for each subsequent floor or part thereof above the First Floor level as mentioned above.

ii)2nd floor and above

COLLAPSIBLE GATE Providing and fixing inposition collapsible M.S shutters with vertical channels 20mm x10mmx2mm braced with flat iron diagonals 20mm x5mm size with top and bottom rails of T-iron 40mm x40mm x6mm with38mm dia steel pulleys complete with bolts and nuts , locking arrangements, stoppers, handles including appluiing a priming coat of red lead paint

BRICK WORKS Providing brick soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed including all labors and materials and if necessary dewatering complete. a) Brick on flat soling

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels

Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level.

1st class brick nogged wall in cement mortar including racking out joint and curing complete as directed in super structure above plinth up to1st floor level (protruding M.S rod/Tor Steel of column to be embedded in cement mortar and will be measured and paid separately .A)112mm thick brick wall (a) In cement mortar in proportion 1:4 (1 cement : 4sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned above.For 112mm thick brick /RB walli) at First floor

ii)at second floor

iii) above 2nd floor

FLOORING AND FLOOR FINISHES cement concrete works in topping 1:1:2 on RCC floor, tread and rise of steps finished with a floating coat of neat cement using cement slury for bond @2.75 kg of cement per sq.m of floor to be laid in panels including curing complete as directed.(b) 20mm thick

Providing polished ceramic wall tiles of approved quality size, shape and thickness not less than 8mm on wall surfaces, skirting ,over cement mortar bed 10mm thick in prop 1:3 (1cement:3 coarse sand) including cutting where necessary finished with flush pointing with fix A-Tile (Choksey/ Sika/ pedelite/ Rouf)/ White cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.(Cement plastering will be measured and paid separetly).(coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department.) (Walls mean both interior and exterior walls) b) Executive range Somany/ Orient/Nitco/Asian Make i) Of size 200mmx300mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirting, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1cement:3coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement slurry mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as directed by the Department) b) Executive range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. iii)Executive range-2 (Sizes 600 mm x 600mm and above) a) Deluxe -VC

18 mm thick marble stoneslab flooring of size 1200mm x 1200mm in flooring including risers and treads of steps, skirting, nosing of treads, dado, walls, pillars laid with 20 mm thick base of cement plaster in prop.1:6 ( I cement : 6 coarse sand) and jointed with grey cement slurry including rubbing and polishing complete with marble tiles of specified quality and shade at all levels.(i) Dungri slab

Extra for nosing in steps of red or white , fine dressed and rubbed with sand stone.

Extra for Granite finish in marble slab/tiles at all levels.

Providing polished SUNROCK-Hi CTS/MULTIWYS tiles of approved quality size, shape and thickness not less than 18mm on floors and skirting ,over cement mortar bed 10mm thick in prop 1:3 (1cement:3 coarse sand) including cutting where necessary finished with flush pointing with fix -A-Tile(CHOKSEY/Sika/Pedelite /Rouf)/ White cement slurry mixed with approved pigment to match shade of tiles complete at all levles as specified and directed.(Coloured pigment should be in conformity with color of tiles and as approved and directed by the department.) ) SUNROKKHI CTS TILES ii). Old Castle (455x455) mm

PLASTERING WORK 10mm thick Cement plaster in single coat on fair side of concrete walls for interior plastering in ceiling etc. up to 1st floor level including arises , internal rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:3 (up to 1st floor level)

b) In cement mortar 1:3 (up to 2nd floor level)

b) In cement mortar 1:3 (above 2nd floor )

15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises , internal rounded angles, not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4

Extra over item no.6.2.2 for plastering above 1st floor level for every addl. Floor or part there of including curing complete as dorected . i) 1st floor upto 2nd floor level

ii) above 2nd floor level

Cement plaster skirting with cement mortar in prop 1:3 (1Cement: 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. a) 15mm thick

MORTAR BAND & POINTING WORKS 15mm thick cement plaster in single coat on single or half wall for interior plastering up to 1st floor level including arises , intenal rounded agles , not exceeding 80mm girth and finished even and smooth including curing complete as directed . i. Up to 1st floor level

ii) 1st floor upto 2nd floor level

iii) 2nd floorand above

FALSE CEILING & PANELLING WORKS Supplying, fitting , fixing and painting where necessary (one coat primer and two coats of paint ) M/F Suspended ceiling which includes G.I perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm ) along with perimeter of ceiling , screw fixed to brick wall / partition with the help of nylon sleeves and screws, at 610mm c/c.Then suspending G.I intemediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mm x10mm x0.55mm thick fixed to soffit with G.I cleat and steel expansion fastners.Ceiling section of 0.55mm thickness having knurled web 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in directon perpendcular to the intemediate channel at 457mm c/c,9.5mm /12.5mm tapered edge Gypboard (conforming to IS 2095 -1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment.Finally, the boaards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound , joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed . (For light fittings, providing opening for doors, window , ventilators etc. cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).

BISON PANEL CEILING AND PARTITION Providing , fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber ,25mm core battens,2.5mm to 3.5mm uniformly thick cross bands , styles and rails made from hardwood timber of width not less than 50mm , fixed to the door frames (chowkath) with necessary hinges , screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid separately) (c) 40 mm thick

MS GRILL WORK Providing fitting and fixing M.S. grill of required pattern for windows / opening with M.S.flats at required spacing in frame all round, square round M.S. bars with round headed bolts and nuts or screws. II Ornamental grill c) Fixed to Brickwork/P.C.C./R.C.C.

ALUMINIUM DOORS & WINDOWS Providing, fitting and fixing coloured anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels.(Cement concrete to be measured and paid separately). a) SideHung andTop Hung windows and ventilators (iii)6mm coloured glass

Providing, fitting and fixing anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm section of approved brands(HINDALCO/BALCO/JINDAL and Other equivalent primary producer )with doors style of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81mm x 45mm x 2mm, bottom rails 100mm x45mmx2mm fitted with glazing clip, special rubber type gasket complete including hydraulic floor spring pivot , tower bolt in each leaf , aluminium door handle, lock, angles cleat etc. complete asspecified and directed by the department at all levels. (iii)6mm coloured glass

Providing , fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodized aluminium frame made of 100mm x43mm x2mm sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL /Other equivalent primary producer )with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gasket complete including hydraulic floor spring pivot , aluminium door handle, lock angles cleat etc. complete as directed by the department at all levels. (v) Pre-laminated board

PAINTING WORKS a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Providing two coats of J.K Wall Putty (White Cement based putty for concrete/mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian paints and of required shade after clering and clearing the surfaces etc.including scaffolding complete as directed at all levels (two coats).

PAINTING ON WOOD BASED SURFACES Applying priming coat over new wood and wood ; based surfaces over 100mm in girth / width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foregin matter, sand papering and knotting. a) With ready mixed paint, wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture(Asian paint/Berger paint/ICICI paint/ J & N Paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foregin matter sand papering and stopping. a) Surface over 100mm in width or girth i) General purpose (Asian paint / Berger paint / ICI paint/J &N paint/Nerolac).

PAINTING ON STEEL AND OTHER METAL SURFACES Applying primary coat over new steel and other metal surface over 100mm in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign mater and scoured with wire brushes, fine steels, wood scrapers and sand paper. a) With ready mixed " red-lead/red-oxide" primer.

Painting two coats(edcluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacturer ( Asian paint/Berger paint/ ICI paint/ J & N paint / Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i) Surface over 100mm in wodth or girth a) General purpose (Asian paint / Berger paint / ICI paint/ J & N paint/ Nerolac).

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998

Providing corrugated galvenised Iron sheet roofing of TATA SHAKTEE / SAIL including fitting and fixing necessary galvenised J or L hooks, bolts and nuts 8 mm dia with bitumen washer 25 mm dia x 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlin etc. (Roof trusses and purlin etc.to be measured and paid separately). (b) 0.50 mm thick

Providing galvd iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed. (b) 0.50 mm thick (ii) 230 mm lapping

DOOR AND WINDOW FITTINGS ALUMINIUM FITTINGS Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) ) Sliding door bolts i) 300mm X 16mm

b) Tower bolts iv) 150mm X 10mm

ii) 200mm x 12mm

c) Door handles iii) 150mm

r) Curtain Rod 20mm x 2mm

t) Door stopper with rubber stopper

STEEL & IRON WORKS Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work / R.B. walling including straightening,cleaning,cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete(upto 1st floor level) a) From Primary Producer: TATA/SAIL/JINDALSteel/SHYAM Steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

i) Extra for each subsequent floor or part there of above first floor level. a) For 1st Floor

b) For 2nd Floor

STEEL RAILING Providing and fixing M.S tube hand rail of approved size by welding etc. to steel ladder railing , staircase railing and similar works ,including applying priming coat of approved steel primer complete as specified and directed by department.

SS Railing

M.S. FAN CLAMP Providing and fixing M.S. Fan clamp Type-I of 16mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.

PLINTH PROTECTION WORKS AND DRAINS Providing plinth protection 50 mm thick to cement concrete 1:3:6 with coarse aggregate of 20 mm nominal size including finishing the surface with 10 mm thick cement plaster in proportion 1:3 with a floating coat of neat cement finished.

Providing drain with brick work in cement mortar in prop. 1:5 with half brick thick side walls and 100 mm thick CC(1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trances and refilling the sides after completion of work etc. as specified.

Providing and applying over sunken slab etc., two coats of waterproofing slurry prepared with neat cement, water and modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd., by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

ANTI TERMITE TREATMENT Pre construction anti - termite treatmentby applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) With aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water , i.e. 1% solution.

Providing , fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of carious sizes with necessary hinge jamb , lock jamb head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C after fitting the frame wiith brick/ concrete works etc. complete as directed by the department for all levels ( P.C.C to be measured and paid separately). (a) 1.25mm thick sheet iii) Size 125mm x60mm (single rebate)

Supplying, fitting and fixing door frame made of M.S equal angle of size 40mm x40mmx5mm fabricated ,welded , mitred and joined as per relevant I.S Codes including fitting 8 nos. of M.S hold fast, providing closing / holding device for 2nos. tower bolts of door for each side and 1no. for fitting and fixing Aldrop( for single leaf) to the frame for fixing the door to the frame , applying primer to all steel surfaces fixing the frame to the wall/R.C.C members by embedding the hold fast securely in C.C block of M-15 grade complete at all levels as specified and directed (Door hinges to be paid as per relevant item of the schedule of rates).

CUPBOARD SHUTTERS ii) Using Block Board d) With block board (both side commercial 19mm/20mm thick)

Shelf partition board

ELECTRICAL WORKS

Wiring for light/fan/call bell ponit with 3X1.5 Sq.mm PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694 : 1991 with flexible bright anealed electrolytic copper conductor for voltage grade upto 1100V (Finolex/RR cable or equivelent make as approved by the deptt.) in surface /recessed conduit wiring system with 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit (berlia/AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the deptt.) including 6A flush type switch/bell push (Anchoe penta/Gold medal/kolor kany.Kom/Havells or equivelant make as approved by the deptt.) GI/MS switch board (ISI marked) with phenolic laminated sheet cover , ceiling rose (Anchor penta/Gold medal/Kolor Kany.Kom/Havells or equivalent make as approved by the deptt.) etc. complete. Short point upto 3.00mtr length

Medium point up to 6.00 metre length

Long point upto 10.00Mtr. Length

Wiring to 5 pin 6A plugs point with 1.5 Sq.mm PVC insulated singlee core unsheathed industrial (multistrand) cable FR conforming to IS-694:1991 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100V (Finolex/RR cable or equivelent make as approved by the deptt.) in surface /recessed conduit wiring system with 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit (berlia/AKG/Precision/Presto Plast/Polycab/MW or equivalent make as approved by the deptt.) wiring system including 5pin 6A flush type plug socket and 6A F/T switch (Anchoe penta/Gold medal/kolor kany.Kom/ Havells or equivelant make as approved by the deptt.) GI/MS switch board (ISI marked) with phenolic laminated sheet cover , including earth continuity with 1.5Sq.mm cable to the third pin of the plug socket etc. as required complete, when placed on the same board.

Wiring for circuit wiring with PVC insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694:1990 with flexible bright annealed electrlytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by the deptt. ) in surface/recessed PVC conduit (Berlia/AKG/Precision/Presto Plast/Poly cab/MW or equivalent make as approved by the deptt.) wiring system. with 2X1.5 Sq.mm cable in 20mm dia 2mm thick/heavy duty rigid PVC IS:9537 Part-III conduit

With 3X1.5 Sq.mm cable in 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrilytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by the deptt) PVC conduit. (Berlia/AKG/Precision/Presto/polycab/MW or equivalent make as approved by the deptt) including earth continuity in surface/recessed 20mm dia 2mm thick/heavy duty ISI marked IS: 9537 Part-III rigid PVC conduit wiring system With 2X2.5Sq.mm + earth continuity with 1X1.5 Sq.mm in 20mm dia 2mm thick/heavy rigid PVC IS:9537 Part-III conduit.

With 2X4Sq.mm + Earth continuty with 1X2.5Sq.mm cable in 20mm dia 2mm thick/Heavy duty rigid PVC IS:9537 Part-III conduit

With 2X6Sq.mm + Earth continuty with 1X4Sq.mm cable in 25mm dia 2mm thick/Heavy duty rigid PVC IS:9537 Part-III conduit

Wiring for drawing sub-main line with PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrilytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kable or equivalent make as approved by the deptt) PVC conduit. (Berlia/AKG/Precision/Presto/polycab/MW or equivalent make as approved by the deptt) including earth continuity in surface/recessed 40mm dia 2mm thick/heavy duty ISI marked IS: 9537 Part-III rigid PVC conduit wiring system With 4X10Sq.mm + Earth continuty with 2X6Sq.mm cable in 40mm dia 2mm thick/Heavy duty rigid PVC IS:9537 Part-III conduit

Supply with fitting and fixing of sheet steel phosphatised powder painted dust and vermin proof double door (IP-43) surface mounted TPN MCB DB incorporated with bus-bar, neutral link, earth bar and din rail etc. ftted on wall with grouting nuts and bols as required complete with making necessary connection as approved, specified and directed by the deptt.(ABB, Scheneider MG, Legrand, Hagger, Crabtree Xpro make) 4 way TPN (4+12) double door

Supply with fitting and fixing of MCCB incommer and MCB outgoing sheet steel, phosphatised, powder painted double door surface mounting vertical TPN DB incorporated with bus bar, Neutral link, earth bar upto 125A and din rail etc. fitted on wall with grouting nuts and bolts as required complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Scheneider MG, Legrand, Hagger, Crabtree Xpro make) 8 Way TPN(4+12) double door

Supply with fitting and fixing of Single pole 10KA 240/415V 50Hz MCB of the following capacity complete with making necessaryn connection as approved, specified and directde by the deptt .6-32A, B series (Schneider MG, Legrand, Hagger, Crabtree Xpro make)

Supply with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed 40A, 100/300mA sensitivity 4P RCCB (ABB, Scheneider MG, Legrand, Hagger, Crabtree Xpro make)

Supply with fitting and fixing of 4P 10KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 80A capacity (for VDB), C series

Supply with fitting and fixing of panel mounting open execution 25KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, and as specified and directed by the deptt. 125A capacity

Supply with fitting and fixing of panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) (without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. ( for indoor panel) 100A capacity

63A capacity

Supply, installation, testing and commissioning of Philips make 18W LED Tube Light fitting with Tubes and accessories complete as directed.

Supplying, fitting and fixing of batten/angle holder including 11w LED retrofit lamp and connection as approved and specified by the department.

Supply including fitting and fixing of A.C ceiling fan complete with all accessories like down rod, canopy etc. of the following sweeps with making necessary connection as approved by the deptt. as required complete and as directed by the deprtment with electronic step type regulator Premium model 1200mm sweep (ORIENT PSPO make)/ premium model 1050/1200 mm sweep SS-390 Deco (Havells make)

Supply including fitting and fixing of following A.C exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the deptt. as required complete and as directed by the deptt. 300 mm Sweep industrial type

450 mm Heavy Duty 900 RPM

Supplying and fixing of switch of 16A capacity switch/Socket flush type (Anchor penta PC cherry/gold medal/Kolor Kay Kom/Havells or equivelent make as approved by the deptt) on the existing PVC/MS board including connection as approved by the Deptt. complete as required.

Wiring for 5/6 pin 16 A power plug point with 4 sq.mm PVC insulated single core unsheathed industrial (multistrand) cable FR coforming to IS-694 :1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volt (Finolex or equivalent make as approved by the department) in surface/ recessed conduit wiring system including fixing 5/6pin 16A flush type socket outlets and 16A flush type switch (Anchor/Penta/Gold medal/kolor kany.com or equivalent make as approved by the department with GI/MS switch board (ISI marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20mm dia, 2mm thick heavy duty rigid ISI marked IS : 9537 PART- III rigid PVC conduit (Berila/AKG/Precision/Presto Plast / Polycab / MW or equivalent make as approved by the department Extra long point up to 20 m length

Supply and fixing of 18SWG sheet steel metal boxes of the following sizes in surface/recessed wiring system with suitable size of 3mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the deptt. 200mm X 150mm X30mm deep (nominal size)

Supply, installation & testing of GI plate earth station with 600mm X 600mm X 6 mm heavy duty GI earth plate with necessary 40mm dia GI watering pipe with GI fittings viz. socket, TEE. Elbow, nipple and 50mm X 40mm GI reducing socket for funnel including locking arrangement with 300mm X 300mm X 6mm hinged cover CI cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner and outer surface of wall as specified and directed by the deptt..

Extra for salt (5Kg) and charcoal (64Kg) in pipe earth electrode to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt.

Supply and laying of 25X6mm size GI strips drawn on surface from earth electrode to Electrical switch gear, machineries etc. complete with supply of GI nuts and bolts, screws etc. including riveting, soldering and making necessary connection as approved, specified and directed by the deptt.

Supply and laying of 8SWG Copper earth wire from earth electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying and laying of 25x5mm size GI strips drawn on surface from earth electrode to electrical switch gears, machineries etc. complete with supply of GI nuts and bolts, screws etc. including riveting, soldering &making necessary connection as approved, specified and directed by the deptt.

Supply, fitting &fixing of lighting Finial Arrestor made of 25mm dia 300mm long GI tube having 85 mm dia single prong at top and 3mm base plate at bottom complete with fitting and fixing with GI nuts and bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt.

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1KV grade solid aluminium conductor up to 10Sq.mm balance stranded conductor, XLPE insulated, cores laid up, PVC tape inner sheathed, armoured (Aluminium for single core up to 70 Sq.mm balance Aluminium strips, galvanised for cables up to 2X10 Sq.mm, 3X10 Sq.mm, 4X6 Sq.mm balance all galvanised steel strip) extruded PVC type ST2 sheathed, 650/1100V grade as per IS 7908 (part-1) 1988 armoured U.G cable U.G cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, sand cushioning etc. complete handling of surplus spoils, debris to proper place as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make or equivalent). 50 Sq.mm 3&½ core armoured U.G.cable

185 Sq.mm 3&½ core armoured U.G.cable

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1KV grade solid aluminium conductor up to 10Sq.mm balance stranded conductor, XLPE insulated, cores laid up, PVC tape inner sheathed, armoured (Aluminium for single core up to 70 Sq.mm balance Aluminium strips, galvanised for cables up to 2X10 Sq.mm, 3X10 Sq.mm, 4X6 Sq.mm balance all galvanised steel strip) extruded PVC type ST2 sheathed, 650/1100V grade as per IS 7908 (part-1) 1988 LT armoured U.G cable U.G cable laid in pucca flooring, road crossing, drain crossing as per site rerquirement and partially in air to connection as approved by the deptt. the control switch, through medium duty G.I pipe (TATA/NEZONE make or equivalent as approved by the deptt.) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make or equivalent). 50 Sq.mm 3&½ core armoured U.G.cable in 50 mm dia medium duty hot dip galvanized pipe ( AKG or equivalent as approved by the department)

185 Sq.mm 3&½ core armoured U.G.cable in 80 mm dia medium duty hot dip galvanized pipe ( AKG or equivalent as approved by the department)

SANETARY WORKS

EUROPEAN TYPE WATER CLOSET Providing fitting and fixing white vitreous china pedestal type water closet ( European type W.C. pan 400 mm high) of Parryware( CAT NO. C0271)/ Hindware/ Cera make with seat and lid, CP brass hinges and rubber buffers,, CI/ MS brackets, 40 mm dia flushbend with fitting including painting of fittings and brackets, required.(Flushing cistern to be paid separately) (a) White

Supplying, fitting and fixing PVC flushing Cistern with all internal fittings withCI brackets including fitting and fixing standard size CP flush pipe , union clamps etc. complete as directed and specified (pipes will be mesured separately)

WASH BASIN: Providing vitreous china wash basin with CI / MS brackets,CP brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls where ever required.(Pillar cock, stop cock, waste coupling are to be paid separately) (a) White vitreous china wash basin of size 600mm x 460mm

Providing , fitting and fixing vitreous water closet squatting pan( Indian type WC- orissa pattern) with all fittings and fixures complete including cutting and making good to the walls & floors whereever required. (Flushing Cistern to be paid separately) B. Hindware Make a. White (ii)580 x440

Providing fitting and fixing mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing , fitting and fixing CP Soap tray/Soap dish complete as directed and specified

Providing , fitting and fixing CP towel rail complete as directed and specified

Providing fitting and fixing CP towel ring complete directed and specified. Sona makeas

Supplying, fitting and fixing PVC Pipes of 6Kg/cm2 ( Supreme/Prince)or other ISI approved including joinin, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L as directed and specified (i) 160 mm

(iii) 75mm

Concealed by chiselling or breaking brick wall/ C.C/R.C.C and making good to the damages. (i) 110 mm

iii) 75mm dia

Supplying, fitting and fixing PVC coupler of ( Supreme/ Prince)or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified . ii) 110mm dia

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified . (i) 160 mm dia

ii) 110mm dia

Concealed by chiselling or breaking brick wall/ C.C/R.C.C and making good to the damages. (i) 110mm

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/ Prince) or other I.S.I approved including joining,fittings and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. 110mm dia

Supplying, fitting and fixing 45 degree PVC bend of (Supreme/ Prince) or other I.S.I approved including joining,fittings and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches 160mm dia

Supplying, fitting and fixing PVC Plain single tee (Supreme/ Prince) or other I.S.I approved including joining,fittings and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surface or in trenches 110 mm dia

75mm dia

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/ Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed.(sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside meqasurement 450mm x 450mm x 450mm flush with 100mm diameter HCI/PVC pipes and cement concrete basin in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in prop 1:2 in side wall and floor. 450mmx450mm air tight C.I inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Supplying , fitting and fixing G.I Pipes of following sizes , with all necessay 'R' brand or similar approved G.I Fittings such as bend ,tee, elbow , reducer, nipple , plug , long screw fitting,H.W clamps etc. Cmplete at all levels including below G.L as directed and specified. Exposed on walls a) (a) 50mm dia (Using Tata medium)

(b) 40mm dia (Using Tata medium)

(c) 32mm dia (Using Tata medium)

(d) 25mm dia (Using Tata medium)

providing and fixing Chlorinated Polyvinyle Chloride (CPVC) pires, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipes with clamps at 1.00M spacing. This includes jointing of pipes.(B) concealed pipes with cutting chases and making good the walls (b)25mm dia nominal outer dia pipe

(b)20mm dia nominal outer dia pipe

C.P Grating (ii) 110mm dia

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified. (G.I. & C.P. pipes will be measured and paid separately) a) 15mm dia Male- Female/ cock(Long Thread) (Using Jaquar made)

(b) 15mm dia angular stop cock

Supplying fitting and fixing chrome plated (C.P.) bib-cock15mm dia of approved brand as directed and specified. (G.I. & C.P. pipes will be measured and paid separately) (ii) Jaquar standard

Supplying and fitting fixing C.P pillar cock of 15mm dia of approved brand as specified and directed Jaquar make Long neck with aretor

Supplying fitting and fixing chrome plated (C.P.) Shower 15mm dia of approved brand as directed and specified. (Pipes will be measured and paid separately) Shower arm 190mm long heavy casted body with wall flange

Supplying and fitting gun metal country pit valve(full way valve)I.S.I make as specified and directed a) 50 mm dia

b) 40mm dia

c) 25mm dia

d) 20mm dia

Supplying and fitting ball valve as specified and directed a) 25mm dia (gun metal)

Providing ,fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia PVC cowel of ISI make

Supplying and placing plastic cyclindrical vertical claused top (PCVC) tank of Sintex/ polycon/ patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (i) 2000 Lt. capacity of Sintex make

Supplying fitting and fixing gun metal check valve including necessary threads to pipes.b) 40 mm dia (Heavy type)

Providing fitting and fixing stainless steel kitchen sinkof Parryware make wih CI/MS brackets , C.P brass chain with rubber plug , pvc waste pipe etc. complete including painting the fittings, cutting & making good the walls wherever required . (Sink cock, stop cocks, waste coupling are to be paid separately .B) Nirali (vi) Grace deluxe Medium(Bowl size-445x368x190) Glossy

SEPTIC TANK

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (a) In ordinary soil (A) Upto a depth of 2.00 m below the existing G.L.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine)

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in substructure upto plinth level ( in prop. 1:4 )

112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (in Prop 1:3)

6 (A) Providing and laying plain/reinforced cement croncrete works in prop 1:2:4:(1 cement :2 coarse sand :4 graded stone aggregate, 20mm down ) including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforcement Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

6 (B) In super-structure from plinth level upto 1st floor level: Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosi

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). a) ISI approved - TMT bar 10mm dia

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). c) ISI approved - M.S. Rod 8mm dia

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (ii) Using 25mm thick plank

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. For depth not exceeding 1.0M. (ii) Using 25mm thick plank

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b). In cement mortar 1:4

15 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (b). In cement mortar 1:4

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

MS Luhit Enterprise