8485 SPECIAL REPAIRS TO BLDG NO T-04 P-15, T-57 AND T-58 AT LOWER COMMAND HOSPITAL (SC) UNDER AFMC GE (CENTRAL) PUNE

Amount

Material and labour for Joint free Non skid coloured ceramic tiles (Matt finish) of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

M & L for coloured glazed or matt finished ceramic tiles of size 300mm x 450mm x 7 to 8mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out side of defence land and complete all as specified and directed.

Material and labour (Full body) Virified Ceramic tiles (any shade) of size 600mm x 600mm x 8mm to 9mm thick (square/ rectangular) polished as in floor set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM 1:6 including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

All as per item No 03 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on concrete or cement plaster surfaces including dismantling of existing floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as specified and directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface including dismantling of existing stone slab & tiles in any description or thickness, laid bedded jointed in any mortar complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as directed.

M & L Machine cut cudappah stone slab 20-25mm thick over cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete complete all as specified and as directed.

M & L for 18 to 20mm thick hand cut Kota stone of size 400 x 550mm (minimum) as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 08 above but kota stone slab as in riser of steps, skirting , dado and pillar and applying oxalic acid ,wax polish to obtain mirror polish finished laid over and including 10mm thick baking coat of CM 1:3 on any type of masonery surfaces complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for etc complete all as directed.

M & L 75mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in sub bases complete all as specified and directed.

M & L 50mm thick PCC 1:3:6 type C-1 as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as directed.

M & L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and Smooth without extra cement complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over a coats of of primer over & including one coat wall care putty complete all as specified & directed .

M & L for preparation of newly plastered surfaces of walls and applying two coats of weather proof exterior acrylic emulsion paint @ 1.67 Ltr/10 Sqm (1st Quality) of required shade (Company Depot Tinted) with silicon additives over and including a priming coat of exterior primer applied @ 2.20 kg/10 Sqm on surfaces of walls complete all as specified and directed. Note :- (a) Exterior acrylic emulsion paint shall be Anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality. (c) Item shall be executed through company's authorised approved Applicator and Contractor shall give Guarentee for 5 years for effectiveness of paint on Rs 100/- non judicial stamp paper.

Complete removal of existing treatment of walls and applying two coats of oil bound distemper over one coat of alkali resistance primer over & including thin layer coat of wall care putty complete all as specified and as directed.

Complete removal of existing treatment of wall and finishing the walls with Acrylic Smooth exterior emulsion paint of required shade (Two or more coat applied @ 1.67 Litre/10 Sqm over and including A priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified and as directed. Note :- (a) Exterior acrylic emulsion paint shall be Anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality. (c) Item shall be executed through company's authorised approved Applicator and Contractor shall give Guarentee for 5 years for effectiveness of paint on Rs 100/- non judicial stamp paper.

M & L for preparation of old painted wooden surfaces over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old painted steel surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down door shutter area exc 1.00 Sqm but not exc 2.00 Sqm each leaf & removing from site all as directed.

Taking down door chowket or frame including shutter (w/o taking of shutters from the frame) area not exc 1.50 Sqm & removing from site all as directed.

Taking down door chowket or frame including shutter (w/o taking of shutters from the frame) area exc 1.50 Sqm & not exc 4.00 Sqm & removing from site all as directed.

Factory made 100% solid wood plastic composite (WPC) door frame, double rebate 65x125mm made from wood plastic composite (Single extruded process) material with density 780 Kg/Cum complete all as specified and directed.

Factory made 100% solid wood plastic composite (WPC) door frame, double rebate 65x100mm made from wood plastic composite (Single extruded process) material with density 780 Kg/Cum, complete all as specified and directed.

Cutting holes in stone / brick walls built in cement mortar for inserting hold fasts measured from face of jambs into wall exc one brick but not exc two bricks & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required all as directed.

S & F mild steel flat iron as in hold fasts fitted to chowkats with nails & welded to angle iron frames complete all as specified and directed.

S & F 30mm thick Flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides with lipping / frame to match complete all as specified and directed.

S & F 30mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed.

S & F Factory made any colour solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2004 Part-II complete all as specified and directed.

S & F factory made any colour solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solvent cement complete all as shown in drg give on page 176 of SSR 2020 Part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 Part II. complete all as specified and directed.

S & F 100mm long mild steel but hinges medium weight colld rolled all as specified and directed.

S & F 150mm long Aluminium powder coated handle, cast type, fix to shutter compled all as specified & as directed .

S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section complete all as specified and as directed.

S & F 300 mm long Aluminium alloy powder coated handles sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S & F Powder coated aluminium frames for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. (Note :- Minimum thickness of powder coating 50 Micron)

S & F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/Mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified (Min thickness of powder coating 50 micron) complete all as specified and as directed. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F stainless steel wire 0.36mm nominal dia of wire and average width of aparture 1.40mm nd fixed with stainless steel wire staples complete all as specified and as directed.

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.80mm thick, cut to shape & size of shelves including dismantling board complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.80mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including dismantling board complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe - 290 Grade - E - 165 including welding etc complete all as specified and as directed.

Supply and fix 25mm dia decorative type curtain rod , stainless steel with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

S & F false ceiling using Non Asbestos (Fiber cement) decorative tiles of size 595mm x 595mm x 4mm thick including GI snap grid of size (600mm x 600mm) using hot dipped galvanised steel section, exposed 38mm x 0.5mm thick at every 1200mm center to center maximum and rotary stitched cross tee of size 24mm x 32mm x 0.5mm thick at every 1200mm center to center and wall angle of size 19 x 19mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200mm center to center in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans/ light including dismatling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets any thickness including cover fillers complete all as specified and directed.

M & L for preparation of new steel surfaces exceeding 10cm width or girth and applying two coat of PU enamel paint over one coat of zinc primer complete all as specified and directed.

M & L for preparation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coat of PU enamel paint (frame & shutter) over a coat of primer complete all as specified and directed.

S & F 500 Ltr capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as directed.

Supply and Fix 15mm bore dia CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings including taking down steel / CPVC / UPVC tubing complete all as specified and directed.

Supply and Fix 20mm bore dia CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings including taking down steel / CPVC / UPVC tubing complete all as specified and directed.

S & F in repairs 15mm bore dia Gun metal globe or gate valves ISI marked with iron wheel head screwed both end for iron pipe and fixed complete all as specified and directed.

S & F in repairs 20mm bore dia Gun metal globe or gate valves ISI marked with iron wheel head screwed both end for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia stop cock copper alloy, chromium plated , fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed complete all as specified and directed.

Supply and fix in repairs 15mm bore dia pillar taps, cast copper with capstan head, chromium plated, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed.

S & F in repairs 32mm bore dia PVC waste pipe for kitchen sink , WHB , Urinal etc complete all as specified and directed.

Supply and Fix in repairs vitreous china coloured Wash hand basin flat back, size 580 x 450mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as specified and directed.

S & F in repairs Soap dish, Stainless steel or Chromium plated, fixed to plugs with chromium plated brass screws all as specified and directed.

S & F in repairs Brass, Chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

S & F in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts to length 600mm long complete all as specified and directed.

S & F in repairs chromium plated, Health faucet spray with 1.5 Mtr long flexible cord with hose and hook complete all as specified and directed.

Supply and fix in repairs 15mm bore dia Bib taps two way type , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B1 as required, superficial area exc 150 Sqcm but not exc 400 Sqcm complete all as specified and directed,

Dismantling of cast iron RCC, AC or PVC pipe jointed in cement mortar any bore dia complete all as directed.

S & F 75mm bore dia out let PVC (SWR) floor trap with SS grating with or without holes including jointing with solvent cement complete all as specified and directed,

S & F 75mm bore dia out let PVC (SWR) Multi floor trap with SS grating with or without holes including jointing with solvent cement complete all as specified and directed,

S & F 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete

S & F 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F stack clamps suitable for 100mm bore dia pipe made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) bends with access door of any radius complete all as specified and directed.

S & F 75mm bore dia PVC(SWR) bends with access door of any radius complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75mm bore dia PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm bore dia PVC (SWR) vent cowl complete all as specified and directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-2 using 40mm graded aggregates as in foundation, filling in mass concrete for manholes & drains complete all as specified and directed.

M & L for plain Cement concrete 1:2:4, type B-1 using 20 mm graded aggregates as in benching and surface channel etc complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-1 using 20mm graded aggregates as in coping including use & waste of necesssary form work complete all as specified and directed.

Dismantling Asbestos cement sheets (corrugated, semicorrugated etc.) in roof coverings complete all as directed.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

M & L 450mm bore dia RCC pipes class NP-2 with collars laid in treches with cement joint and tested complete all as specified and directed .

M & L for post construction Anti termiteTreatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

M & L for post construction Anti termiteTreatment of soil under existing floors using emulsion @ 1.00 Litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M & L for post construction Anti termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 Litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete and removing material to store for keeping in safe custody for reused and making good disturbed surfaces of walls, floors etc complete all as directed. Note :- Serviceable copper conductor shall reused for wiring under item Nos 95 to 100 hereinafter.

Taking down carefuly by unscrewing from boards / outlets boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc removing material to store for keeping in safe custody for reused complete all as directed. Note :- Serviceable fittings & fixtures shall reused under relevant item Nos 101 to 108 hereinafter.

Taking down exhaust fan of any sweep, keeping with safe custody , replacement of unserviceable 3 core PVC insulated, PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal , overhauling the exhaust fans, replace the condensor of suitable size, painting of exhaust fans complete with synthetic enamel paint by spray painting including filling cavities with filler one coat after cleaning all dust etc and and refixing the same to its originalposition in servicable conditions complete all as specified.

Labour only for fixing point wiring with stranded copper conductor 1.5 Sqmm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts with including new casing & caping of adequete size not less than 25mm wide including all accessories etc with PVC boxes including frame / cover plate suitable for mounting switches / sockets etc and PVC insulated stranded copper conductor 1.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for the following :- Note : - (i) Rates of new casing & caping for the above item shall deemed to be included in quoted rates. (i) Copper conductor 1.5 Sqmm for wiring / earth wire shall be reused obtained from item No 92 above . (iii) Making good of disturbed surfaces will be done by contractor without any extra cost to the Govt.

(a) One light point controlled by one, one way switch complete all as specified and directed

(b) One fan / Exhaust fan point controlled by one, one way switch complete all as specified and directed.

(d) One 5 pin 5 Amp Socket outlet point controlled by one , one way switch on independent board complete .

One 5 pin 5 Amps socket outlet point controlled by one, one way switch on same board complete all as specified.

All as per item No 95 above but with 2.5 Sqmm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS cable 1100 Volts grade, ISI-694 Marked including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to earth dolly complete all as specified for one 15 Amps sockets outlet on independent board all as specified for the following :- Note : - (i) Rates of new casing & caping for the above item shall deemed to be included in quoted rates. (i) Copper conductor 1.5 Sqmm for wiring / earth wire shall be reused obtained from item No 92 above . (iii) Making good of disturbed surfaces will be done by contractor without any extra cost to the Govt.

Refixing piano switch 5 Amps SP one way 230 Volts complete all as directed.

Refixing piano switch 15 Amps SP one way 230 Volts complete all as directed.

Refixing piano socket oulet two in one 3 pin 5 Amps flush type 230 Volts single pole one way suitable for plug tops complete all as directed.

Refixing piano socket outlet two in one 3 pin 15 Amps flush type 230 Volts single pole one way suitable for plug tops complete all as directed.

Refixing stepped typr electronic fan regulator complete all as directed.

Refixing 240 Volts single pole and neautral enclosure with a two pin and earth plug and socket complete with including new one 20 Amps single pole MCB complete all as directed.

Refixing ceiling rose surface type three terminal complete all as directed.

Refixing LED light fitting of any type complete all as directed.

M & L for sub main wiring complete with two single core 4 Sqmm, 1100 Volts grade, PVC insulated stranded copper conductor FRLS cable with continuous copper earth conductor of 4 Sqmm in and including Non metalic PVC rigid conduits of suitable size totally concealed in walls / floor etc including accessories including cutting chases in making good to facing where required including taking down old unserviceable / worn out sub main wiring of any type and size complete all as specified and as directed. Note :- (i) Making good of disturbed surfaces wiil be done by contractor without any extra cost. (ii) Two Runs of 4 Sqmm conductor , one run of 4 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

M & L for sub main wiring complete with four single core 4 Sqmm and one core of 4 Sqmm earth wire 1100 Volts FRLS grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including Non metalic PVC rigid conduits including accessories including taking down old unserviceable / worn out sub main wiring of any type and size complete all as specified and as directed. Note :- (i) Making good of disturbed surfaces wiil be done by contractor without any extra cost. (ii) Four Runs of 4 Sqmm conductor , one run of 4. Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

M & L for sub main wiring complete with Four single core 6 Sqmm, 1100 Volts grade, PVC insulated stranded copper conductor FRLS cable with continuous copper earth conductor of 6 Sqmm in and including Non metalic PVC rigid conduits of suitable size totally concealed in walls / floor etc including accessories including cutting chases in making good to facing where required including taking down old unserviceable / worn out sub main wiring of any type and size complete all as specified and as directed. Note :- (i) Making good of disturbed surfaces wiil be done by contractor without any extra cost. (ii) Four Runs of 6 Sqmm conductor , one run of 6 Sqmm earth conductor and one run of PVC conduit shall be measured as one unit length.

Taking down MCCB TPN DB double door with 200 Amps rated busbar 415 Volts and Refixing same with including new MCCB & MCBs (after repairs of building works) complete all as specified and as dirtected.

Taking down MCB SPN DB 8 way double door with 200 Amps busbar 240 Volts and Refixing same (after repairs of building works) complete all as specified and as dirtected.

Taking down Refixing MCB SPN DB 4 way double door with 200 Amp busbar 240 Volts and Refixing same (after repairs of building works) complete all as specified and as dirtected.

S & F MCB TPN DB 4 way double door with 200 Amps rated bushbar 415 Volts complete all as specified and as dirtected.

S & F MCB SPN DB 8 way double door with 200 Amps rated bushbar 240 Volts complete all as specified and as dirtected.

S & F MCB SPN DB 4 way double door with 200 Amps rated bushbar 240 Volts complete all as specified and as dirtected.

S & F for MCB single pole rated capacity 6 to 32 Amps 240 Volts complete all as specified and as dirtected.

S & F for MCB double pole of rated capacity 32 Amps 240 Volts complete all as specified and as dirtected.

S & F for MCB four pole of rated capacity 40/63 Amps 415 Volts complete all as specified and as dirtected.

M & L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.50 Sqmm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade, ISI-694 marked drawn in PVC casing caping 25mm wide heavy duty ISI marked including all accessories etc with PVC boxes including modular frame / cover plate suitable for mounting switchesX/ sockets etc and PVC insulated stranded copper conductor 1.50 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for following. : Note :- making good of disturbed surfaces will be done by contractor without any extra cost to the department.

(a) One light point controlled by one, one way switch complete all as specified and directed.

(b) Three light point controlled by one, one way switch complete all as specifed and directed.

(c) One fan point controlled by one, one way switch complete all as specified and directed.

(d) One 3 pin 5 Amps sockets oulet point controlled by one, one way switch on independent board complete all as specified and directed.

(e) One 3 pin 5 Amps socket outlet point controlled by one, one way on same board complete all as specified and directed.

(f) One bell / buzer point controlled by one bell push complete all as specified and directed.

All as per item No 121 above but with 2.50 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade ISI-694 maked including PVC insulated stranded copper conductor 2.50 Sqmm single core cable as earth connecting to earth dolly complete all as specified for one 15 Amps socket outlet point on independent board. Note : Making good of disturbed surfaces will be done by contractor without any o the department.

S & F switch piano 5 Amps SP one way 230 Volts complete all as specified and directed.

M & L switch piano 15 Amps SP one way 230 Volts complete all as specified and directed.

M & L Piano socket outlet 2/3 pin 5 Amps multipurpose 230 Volts single pole, one way suitable for plug tops complete all as specified and directed.

M & L piano socket outlet 2/3 pin 15 Amps multipurpose 230 Volts single pole, one way suitable for plug tops complete all as specified and directed.

M & L stepped type electronic fan regulator all as specified and directed

S & F for bell push, flush type 5 Amp complete all as specified and directed.

S & F bell electrical ding dong including hard PVC baord ISI marked complete all as specified and directed.

S & F in replacement of round recessed mounted Edge-lit technology for plare free light 25 KV voltage surge protection housing made from engineering plastic with in built driver power factor> 9 operating voltage range 100-300V AC unique desiged unabled by a separate modular surface rim convert from recessed to surface mounting in round shape 12 Watt LED downlighter of white/ neutral white/ warm white color tempreature as per site site requirement etc 3 core prewired and all accessoried complete all as specified and directed.

M/s Omkar Associates

REKHA ELECTRICALS

M/S RAJIV BUILDERS

PAL CONSTRUCTION

Vijay Construction and Company

L.T Associate

M/S NAVNEET S MORDE

Suma Construction

M/s.BAJRANG CONSTRUCTION

ANIL CONSTRUCTION CO.

KSP ENTERPRISES

MANIYA CONSTRUCTION CO