Day to day diversion /extension and dismantling of 6.6 kV/ 3.3kV Overhead power lines of ILBL OCP , Lakhanpur area, MCL.

Erection of metallic pole of following length in cement concrete 1:3:6(1 cement: 3 coarsesand: 6 graded stone aggregate 40 mm nominal size) foundationincluding excavation and refilling etc. as required- Above 10.00 metre and upto 12.00 metre

Erection of steel tubular pole length exceeding 12 mtrs but not exceeding 16 mtrs in cement concrete 1:3:6( I cement:3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and secured with holding clamps,bolts, nuts etc as reg.

Supplying and erection of galvanised stay set for 11KV overhead lines complete with 19/20 mm dia X 1.8 metres long stay rod,anchor plate of size 45 cm X 45 Cm X 7.5 mm, thimble, stay clamps, turnbuckle (20 mm X 600 mm),7/ 4.00 mm dia G.l stay wire and 11KV strain insulator etc in cement Concrete 1:3:6 (1 cement: 3 coase sand: 6 graded stone aggregate 40 mm normal size) foundation incluiding exavation and refilling etc. as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6mm(7.14 kg per metre) double pole cross arm for three wire 11KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6mm (7.14 kg per metre) cross arm for two 11 KV over head line conductor complete 50 mm X6 mm MS plat iron clamps, iron clamps, bolts and nuts incluiding drilling holes for insulator pins, bolts, nuts and washer etc (as per drawing ) and painting with primer and finish paint as required

Supplying of 75 mm X 40 mm X 6mm channel iron pole top bracket /cross arm for single 11/22/33KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required

Supply of two lengths of angle iron 75 mm X 40 mm X 6 mm (4.5 kg per metre) double pole cross arm for 11KV over head line conductors complete with through bolts and nuts for clamping to the primer and finish paint as required for Cradle guard

Supply of angle iron 75 mm X 40 mm X 6 mm (4.5 kg per metre) for running earth support complete with through bolts and nuts for clamping to the primer and finish paint as required

Erection of double pole 3 wire cross arm for11KV/22KV/33KV Overhead lines etc. as required

Erection of pole top/straight two wire/ V shape two wire, angle iron/channel, cross arm on steel tublar/PCC pole for 11/22/33 KV as required.