Grossrad main Gear, 107 Teeth as per RDSO's Spec. No.- MP.0.2800.19 (

Special Eligibility Criteria

1. 1

   Material is a CLW controlled item. Hence, Full/Bulk order is restricted to be procured from CLW approved firm for the tender item.

   Document requiredConfirmation required
2. 2

   Tenderer other than manufacturer should attach/upload tender specific authorization/valid dealership certificate issued by manufacturer along with their offer failing of which offer of the firm will not be considered as a valid offer and such offer will summarily be ignored. No back reference will be madein this regard.

   Confirmation required
3. 3

   The Authorised dealers/ agent of the approved vendors/OEM must upload tender specific authorization in proper format preferably as per Annexure-4 of GCC attached with the tender failing of which their offer will not be considered as valid offer and summarily be rejected. No back reference will be entertained

   Confirmation required
4. 4

   Public procurement (Preference to Make in India) is applicable as per para 29.0 (29.1 to 29.5) of GCC attached.

   Confirmation required

Check List

1. 1

   [i] Have you attached the past performance credentials with your offer? [ii] Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material? [iii] Have you gone through all the documents attached with the tender thoroughly before offering your bid.

Commercial-Compliance

1. 1

   FOR-Destination.Firm should quote for direct dispatch to destination on door delivery basis, otherwise the offer may be liable to be ignored.

   Confirmation required
2. 2

   Mode of despatch: By road on door delivery basis.

   Confirmation required
3. 3

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Confirmation required
4. 4

   The procurement of the item is restricted to Class I local suppliers only and the vendors who do not qualify to be class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item and participates in the tender it does so a at their own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. Requirement of a vendor to be a Class-I local supplier for the this item, shall be a mandatory condition in addition to other qualifying eligibility criteria/conditions. Please refer para 29.0 of GCC attached to tender for details.

   Document optionalConfirmation required
5. 5

   Reciprocity Clause: Bidders may please note that- Entities of countries which have been identified by the Nodal Ministry/Department as not allowing Indian companies to participate in their Government procurement for any item related to that Ministry/ Department shall not be allowed to participate in Government from in India for all items related to that nodal Ministry/Department, except for the list of items published by the Ministry/Department permitting their participation. The term entity of a country shall have the same meaning as in the FDI policy of DPIIT as amended from time to time.

   Document optionalConfirmation required
6. 6

   Bidders are requested to go through Clause No. 32.0 (32.1 to 32.6) of SER Instruction to Tenderers and General Conditions. Bidders should confirm following certificate for Compliance (a) I have read the clause Sr. No. 32 of GCC attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not subcontract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you dont confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per Part B of Annexure8 of GCC attached with the tender along with their Bid/Offer.)

   Document optionalConfirmation required
7. 7

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.

2. 2

   Code of Integrity Declaration: I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other concerns or affiliates (such as having common partner/director/promoter/owner/holding company/management control etc.) have participated in this tender which give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such related concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti- competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected at any stage

3. 3

   FOR-Destination: No deviation from the FOR-Destination stipulated in the tender is permitted.

4. 4

   Inspection ,Testing and Acceptance: No deviation from the Inspection ,Testing and Acceptance stipulated in the tender is permitted.