NITNo19ItemNo4

Supply of Non Clog Sewage Submersible Pump capacity 3 MGD / 60 HP/44.7KW/3 Phase RPM : 1450, Discharge: 570 m3/hr delivery : 200 mm, Head : 20 meter, Flow in LPM : 570 m3/hr, Solid handling : 100 mm, MOC :- Impeller: CF8M, Casing: C.I.F.G :260, Shaft: SS410 Pump / Motor shaft : SS-410 including 10 meter cable. Make: JASCO/Mody/KSB and DJB Approved make.

Fabrication/ supply double door fully automatic control panel suitable for operation of 60 HP/44.7 KW Sewage Submersible pumps, including Single phase preventer, Timer relay, Overload relay, Power Contactor, Power Indicator, Amp-Volt Meter, On-Off Push button and other standard switchgears.

Hiring of long boom crane for lowering & lifting the submersible pump with fuel operator and helper for shifting, lowering, balancing and holding the M.S. Pipe & other works as required at site.DSR 2021 Item Code: 0028(Excluding of GST).

Dismantle the existing old 30 HP sewage submersible pump with old rusted fitting by cutting nut bolt and taking out on floor after disconnecting the electric connection of submersible pump and shifting in store of JE In charge at site. The work will be executed through expert skilled & unskilled staff and safe working with safety of men & material as require at site.

Supply of 2 Meter MS I Beam of size 320mm x 132mm x 11.5mm for supporting beam with clamping of 300 mm dia delivery line of 3 MGD Submersible pump. Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 2021 Item code 10.2 (Payment will be done as per actual at site).

Supply of SS- Chain for suitable the hanging of 3 MGD None Clog Sewage Submersible Pump, 20 meter length standard, ISI mark.

Providing Mild Steel specials 300 mm nominal (clear internal dia) special of 5 mm thickness (min.) (MS pipe 20 meter.) fabricated/manufactured out of MS plate of steel grade Fe 410 as per lS 3589:2001 or out of HR coils of same/equivalent grade; coated internally with epoxy and externally/ outside with epoxy coating; complete in all respect; with up to date amendments in relevant lS codes and as directed by Engineer-ln-Charge. Rate approved by EE(Planning) water II, Item no. 13(A)-d. Make : Tata/Jindal and DJB Approved make. (Payment will be done as per actual at site).

New NRV Size 300X300 mm dia PN 1.0 CI Make : KBL/IVC and DJB approved make.

New Sluice Valve Size 300X300 mm dia PN 1.0 CI Make : KBL/IVC & DJB approved make.

ISI mark 300 X 300 mm dia MS Bend 90 degree "B" Class.

ISI mark 200 X 200 mm dia MS Bend 90 degree "B" Class.

ISI mark MS Flanges for 300 mm dia pipe

ISI mark MS Flanges for 200 mm dia pipe

ISI mark MS reducer of size 200X300 mm dia

Supply of neoprene rubber sheet. (Payment will be done as per actual at site)

Supply of nut bolts & washer as per required for reinstallation of pump set. DJB SOR 2022 Item Code 45.1.53. (Payment will be done as per actual at site)

Primer & Painting of complete work

Transportation charge including loading unloading the material at Narela SPS.

Testing and commissioning of Installation of 3 MGD Non Clog sewage submersible pump set including Installation of control panel & make electric connection and fitting of pipe/NRV/Valve/Band/Flange with the Nut bolt & washer in sewage sump. The work will be execute through expert skilled & unskilled staff and safe working with safety of men & material as require at site.

paramount systems

CHANDERA BUILDERS

JAI MATADI TRADERS

ARISETEC ENTERPRISES