Repair/Maint of street lights/security lights at MPH area under GE (Utilities) Udhampur.

Amount

Taking down carefully existing old unserviceable street light fittings of any capacity & size from poles/buildings and refixing the same on poles/ building after making the fittings serviceable complete all as specified and directed by Engr-in-Charge. Note:- (i) Spare parts required for making the street light functional shall be measured and paid separately under relevent items of BOQ. (ii) The cost of Replacement of minor Parts i.e. nuts/bolts,TC wire,connectors etc are deemed to be included in this item. (iii) Necessary elevator/VMSL shall be arranged by contractor for repairs.

Painting to steel tubular poles 9/12 metre long with two coats of aluminium paint including brackets, clamps, nuts bolts, washer etc. including making yellow and black strips alternatively (30 cm width each) on pole upto 1.5 metre from the ground level and marking of pole Nos with black paint having back ground yellow as per existing complete all as specified and directed by Engr-in-Charge.

Constant current LED driver with MCPCB (in replacement) for energy saving & environment area light fitting > 90 watts security light with active power factor correction (APFC) electronic driver. LED driver 90 watt with operating voltage between 100-270V AC of existing specification complete all as specified and directed by Engr-in-Charge. Make:- C&S/Crompton Greaves /Havells/ Syska/Surya Roshini/Polycab/Wipro. Note : It should be suitable for any makes of LED street /flood light Fittings.

Constant current LED driver MCPCB (in replacement) for energy saving & environment area light fitting > 60 watts security light with active power factor correction (APFC) electronic driver. LED driver 60 watt with operating voltage between 100-270V AC of existing specification & make complete all as specified and directed by Engr-in-Charge. Make:- C&S/Crompton Greaves /Havells/ Syska/Surya Roshini/Polycab/Wipro. Note: It should be suitable for any makes of LED street /flood light Fittings.

Surge Protection Device (SPD) (in replacement) of capacity 10 KV/5KA for LED energy saving & environment area light of 45-200 watts security light/ flood light with maximum operating voltage 320V AC, 50 Hz & maximum peak current 10 KA of existing specification complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable rusted GI tubing brackets, 40mm bore, light grade with new GI tubing bracket, 40mm bore, light grade, 1.20 metre length ,made to shape including MS clamp with nuts, bolts and washers etc complete all specified and directed by Engr-in-Charge.

Terminal box made out of SMC with hinged door and locking arrangements of size 140x140x95mm (in repair) including Backlite 4 way connector,M.S. Clamps suitable for pole ,PCC/MS/GI/rail etc. with bolt, nut and washer ,electrical connections including MCB SP 6-32 Amps complete all as specified and directed by Engr-in-Charge. Make: - Sintex product code No GSJB-1414 or its techno commercial equivalent in Havells/CG/Polycab/Bajaj/Wipro.

Taking out old unserviceable two core/three core aluminium and copper cable of any of any sizes/ capacity complete all as specified and directed by Engr-in-Charge.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 10 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified and directed by Engr-in-Charge. Make:- Plaza/ Paragon/ Kalinga.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 6 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified and directed by Engr-in-Charge. Make:- Plaza/ Paragon/ Kalinga.

PVC insulated multi stranded aluminum conductor PVC cable sheathed 4 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified and directed by Engr-in-Charge. Make:- Plaza/ Paragon/ Kalinga.

PVC insulated and sheathed 2.5 sqmm, 3 core multi stranded, copper conductor cable from junction box/OH line to street light fitting or for engagement lights complete all as specified and directed by Engr-in-Charge. Make : Havells Cat part No. WHMFDSKB21x5 or any equivalent make as specified in Particular Specification.

PVC insulated and sheathed1.5 sqmm, three core, multi stranded, copper conductor cable from junction box/OH line to street light fitting or for engagement lights complete all specified and directed by Engr-in-Charge. Make:- Havells cat part No. WHMFDSKB21X5 or any equivalent make as specified in particular specification.

Taking out old unserviceable XLPE UG cable of any sizes/ capacity complete all specified and directed by Engr-in-Charge.

XLPE insulated, armoured, aluminium conductor cable, 1100 volts grade, heavy duty, cross sectional area 10 sq mm ,2 core, laid in trenches/ducts/through pipe complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 15 here-in-before but of size16 sqmm, 2 core.

All as per Srl item No 15 here-in-before but of size 16 sqmm, 4 core.

All as per Srl item No 15 here-in-before but of size 25 sqmm, 3.5 core.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables, foundation of poles, stays and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning , filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge.

Removing of excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-Charge.

Double walled corrugated pipe (DWC) of size 40 mm conforming to IS:14930(part-II)/IS 16205 Part II with necessary snap fit coupler complete all as specified and directed by Engr-in-Charge.

LED flood light, 120 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGLS C5 01 120W or its techno commercial equivalent in Wipro/Philips/Havells /CG.

LED flood light, 150 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGLS C5 01 150W or its techno commercial equivalent in Wipro/Philips/Havells/CG.

Colour (Red,green,orange) LED flood light, 100 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGLS C5 01 100W or its techno commercial equivalent in Wipro/Philips/Havells/CG. Note: For item Serial no 20.00 to 22.00 (a) MS clamp,Brackets required for fixing of fitting are inclusive of rate quoted. (b) Necessary grouting/making good on existing surfaces shall be inclusive of rate quoted. (c) GI pipe of required dimensions if required at site shall be provided by the contractor.

LED street light fitting with dusk down (sensor) 90 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Note:- Necessary fixing authority including reducers may be included in rate. Make:- Polycab Cat Part No-PUB0506325-90Watt or equivalent in Havells/Wipro/CG/ Philips/ Hellonix.

LED street light fitting with dusk down (sensor) 70 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Note:- Necessary fixing authority including reducers may be included in rate. Make:-Polycab Cat Part No-PUB0506324-70Watt or equivalent in Havells/Wipro/CG/ Philips/ Hellonix.

LED street light fitting with dusk down (sensor) 60 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Note:- Necessary fixing authority including reducers may be included in rate. Make:-Polycab Cat Part No-PUB0506323-60Watt or equivalent in Havells/Wipro/CG/ Philips/ Hellonix.

Appointment light LED 12 watts complete all as specified and directed by Engr-in-Charge. Make-Havells/Polycab/Wipro/CG/Philips/ Hellonix.

Flexible pipe 25 mm complete all as specified and directed by Engr-in-Charge.

Post top lantern, LED, type 40 watt , 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGPT 01 40C or its techno commercial equivalent in Wipro/Philips/Havells/CG.

LED bollard lights of 11 watt capacity including taking down existing unserviceable garden lights of any type/capacity complete all as specified and directed by Engr-in-Charge. Make:- Wipro/Philips/Polycab/Havells/CG.

Automatic street light control switch (in replacement) of 8 KW three phase using Infrared sensor based Nature Switch for automatic switching of street light. Nature switch operation should be based on Natural Light Lux*level. Reqd illuminance level also have part night operation facility for min 4 hrs to max 12 hrs. The sensor along with suitabe rating power contractor (s), one Incoming and three Outgoing MCBs rating of 20-32 Amps & main load circuit wiring (copper) of min 10 sqmm should be enclosed in a pole/wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycarbonate enclosure conforming to IP66 protection class-2 (Hansel make). The circuit should be also have provision for manual operation (i.e. sensor by pass option) complete all as specified and directed by Engr-in-Charge. Make: Model No. SWADEEP 66- 8 KW3P or L&T / Havells/ Indo asian

MCCB 4 pole ,Ics=100%Icu- 25 KA, 415 Volts, 63 Amps (in replacement) ,with thermal adjustable and fixed magnetic setting with extended terminals suitable for isolation complete all as specified and directed by Engr-in-Charge. Make:- Schneider Cat No. :- LV510315 or as equivalent in Havells/LEGRAND.

MCCB 4 poles ,Ics=100%Icu- 36 KA, 415 Volts, 100 Amps (in replacement) ,with thermal adjustable and fixed magnetic setting with extended terminals suitable for isolation complete all as specified and directed by Engr-in-Charge. Make:- Schneider Cat Part No. LV510347 or as equivalent in Havells/LEGRAND.

Polycarbonate globe with gallery 242mm dia (in replacement) round suitable for retrofit LED lamp B22 Base complete all as specified and directed by Engr-in-Charge.

Polycarbonate globe with gallery 300mm dia round suitable for retrofit LED lamp B22 Base (in replacement) complete all as specified and directed by Engr-in-Charge.

GI tubing, light grade, 50mm bore including necessary clamps for protection of the cable ,laid in trenches/under road/path complete all as specified and directed by Engr-in-Charge.

LED lamp warm white/white 5 Watt (in replacement) complete all asspecified and directed by Engr-in-Charge. Make:- Wipro/Philips/Polycab/Havells/CG.

LED lamp warm white/white 9 Watt (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Wipro/Philips/Polycab/Havells/CG.

MCB SPN -40 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat No.:- 811035 or equivalent in Havells,C&S.

MCB SPN -32 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat No.:- 811034 or equivalent in Havells,C&S.

MCB SPN -20 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat No.:- 811032 or equivalent in Havells,C&S.

MCB SP-10 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat Part No.:- 811010 or equivalent in Havells/C&S.

MCB TPN -63 Amp, 230V, 50Hz,10 KA (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat No.:- 811198 or equivalent in Havells/C&S.

Supply and erecting steel tubular swaged poles erected to truly vertical or planted as strut complete with 6mm thick mild steel base plate(300mmx300mm), welded to pole, finial taper plug, bolts, nuts, and screws. Poles made out of ERW MS tubing conforming to IS-2713 Part-II Type 410 SP-37, 9.5mtr long including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally and portion embedded in concrete, making five black & white bands at lower portion of pole each 300mm wide alternately upto the height of 1.5 m and marking pole No. with black paint at suitable height including making two nos holes of suitable size in steel tubular pole by gas welding for passing PVC cable connection from junction box to security lights through pole where junction box to be fitted in pole complete all as specified and directed by Engineer-in-Charge. Note: - Excavation, Earth Work and PCC in foundation shall be measured and paid for separately.

Plain cement concrete M- 7.5, (1:4:8), type D-2 (using 40mm graded crushed stone aggregates) as in foundation of poles complete all as specified and directed by Engr-in-Charge.

Plain cement concrete, M-15((1:2:4), type B-0 (using 12.5 mm graded crushed stone aggregates) as in coping of poles complete all as specified and directed by Engr-in-Charge.

vijay kumar gupta and co

MOHAN LAL AND SONS

proach associates

m/s fangalia traders

M/S Builders Indias

PREM NATH KHAJURIA AND SONS

slathia construction works