PROVN OF CERTAIN SANCTIONED SPECIAL REPAIRS, REVENUE AND MINOR WORKS AT MIL STN NAHAN UNDER GE CHANDIGARH.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard soil

All as per item above but in soft / disintegrated rock

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in hard/dense soil

M&L for removing surplus excavated material exc 250m but n exc 500m and depositing where directed.

M&L Plain cement concrete (1:4:8), type D-2, using 40 mm graded crushed stone aggregate as in foundations, filling , mass concrete and sub base.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded crushed stone aggregate as in sub base.

Sand filling under floors or in foundations including watering and consolidation

Machine pressed precast conctete coloured interlocking paver block with grey cement and pigment any shape, colour and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade and as decided by Engr-in-Charge

Hard core of gauge n exc 63 mm, deposited, spread and levelled

Flush pointing to random rubble, uncoursed or brought up to coursed CM 1:4

M&L cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified.

S&F steel work in tubular trusses and posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St-240.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410 (Gde E-250)

Mild steel screw bolt (machine made) with hexagonal or square head at one end & screwed the other end, and fitted with washers and one hexagonal or square nut, length of bolt exceeding 10 cm and not exceeding 15 cm long and 5-10mm dia bolt complete all as specified.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls fixed with L type or J type or cranked hook bolts/self tapping screws all as specified

Mild steel flat as in wind ties of grade Fe-290 Gde-E-165 or roof including drilling holes, securing bolts etc and similar works complete all as specified.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Preparation of new steel surfaces of any description, n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Removal of excavated soil to a distance exc 250 metre and n.exc 500m depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

M&L 15mm thick thick (square/ rectangular) parking tiles, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match cement complete all as specified.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6

Providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parpets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering , slightly rounded or chamfered angles and throating including necessary form works etc.

M&L 15mm thick rendering in cement mortar (1:6) on brick wall or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

Two coats of acrylic distemper/ distemper oil emulsion (OBD) on new plastered wall surfaces of any description over a thin layer wall care putty complete all as specified including preperation of surfaces

Brick work with sub class 'B' bricks half brick thick straight or curved on plan to any radius in half brick walls built in CM(1:4) complete incl demolition all as specified and as directed

S & F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including making good to existing surface jamb/floor complete in all respect including demolished flooring /tiles making jambs, giving existing type of surface finish etc so as to mach the existing surface, as specified

M & L 30mm flush shutters, solid core construction with particle board core and plywood face panels commercial type on both faces

M&L for preparing new wooden surface of any description over 10cm width or girth and painting with two coats of synthatic enamel paint over a coat of pink primer complete all as specified

M&L RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in , beams cantilevers,column,bressummers lintels over 1.5m span

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.

All as per item No 33 above but 6mm to 8mm dia

RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate nominal mix, using 20mm graded trap stone aggregate for concrete as in slabs supported on walls, beams and columns in floor, landings, balconies, and in shelves and the like

S&F 15mm dia Angle cock chromium plated brass fancy type, screwed down , high pressure, scrwed both ends for iron pipe.

S&F in repair Chromium plated brass 2 in 1 health faucet with hook 1mtr tube

M&L 15mm GI tubes medium grade with all fittings & fixed complete to walls or ceilings or laid in floors.

S&F 15mm bore GI nipple 100mm

S&F 15mm bore GI 'T' for connection

Demolitioin of cement conc of any description and in any position not otherwise specifically provided for

Taking down cement plasters on brick or conc surfaces incl racking out joints, hacking for key all as specified.

M&L for machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

All as per above item but on vertical surfaces over 15mm thick cement mortar backing coat in CM 1:4

Cement concrete type B -1, 1:2:4 (20mm graded crushed stone aggregate) 25 mm thick,

Formwork to edges of concrete flats, treads, railings, openings in walls, floor and roofs, sides of RCC/PCC bands, horizontal or sloping n.exc 20 cm wide for rough finished surfaces.

Disconnecting/Removing of Service wire any size from LT Pole to existing Distribution Board complete all as directed.

Disconnecting/Removing of ACSR conductor from LT Pole to LT Pole complete all as directed.Note : T&P for Srl item No 47 & 48 will be provided by the Contractor.No extra payment will be made for it.

Meterial and labour for dismantling reinceforce cement concrete pole /Iron poles/struts of any size and type including breaking of concrete cutting of mild bars of any size from below the ground level up to 60 cm depth and all items removing from site all as directed by Engr -In- Chrage (Note :Excavation earth work included in this quoted rate)

M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge

M & L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover.

Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 part-1 of size 120 mm outer dia and 103.5 mm inner dia all as directed.Make: Tirupati Plastomatics Pvt .Ltd

Ditto- all as per item 52 but of size 90 mm outer dia and 76 mm inner dia all as directed.

Ditto- all as per item 52 but of size 77 mm outer dia and 63 mm inner dia all as directed.

Ditto- all as per item 52 but of size 63 mm outer dia and 50 mm inner dia all as directed.

Supply, laying ,jointing and testing LT XLPE insulated cable screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 2 core including the fixing arrangements, making all incoming and out going connections through the lugs/thimbles complete all as specified and directed Note :- Excavation & earth work shall be measured & paid separately under respective item of this schedule . Make:Finolex/Gloster Polycab/KEI/Havell's/Kalinga Premium/Anchor.

All as per item 56 but size 25 sq mm 4 core

All as per item 56 but size 50 sq mm 4 core

All as per item 56 but size 95 sq mm 3.5 core

All as per item 56 but size 120 sq mm 3.5 core

M&L for LT cable route marker aluminium with direction mark including mounting on RCC block burried in ground complete all as specified and directed.

Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work complete all as directed.

M&L for Earthing complete with Galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.

Supply and fixing of Switch disconnector fuze 200 Amps , 3 Pole & Neutral ,AC,415 Volts,50 Hz with Panel mounting cubical type in sheet steel Encl, with 3 No's HBC fuses incl making all incoming and out going wires are properly fitted through lugs/thimbles complete all as specified and directed. Make: Havell's Cat No:IHHCD01200 or Equivalent to L&T,Indo Asian

Supply & fixing of Busbar chamber TPN 8 way comprising of 3 copper strips 100 Amp & one copper strip of cap 63 Amps and minimum length 460mm long enclosed in sheet metal enclosure including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles all as specified and directed.Make:Havell's Cat Part No: IHBB010008 or Equivalent to Legrand,Siemen.

M/s Bhisham Raj and Sons