REPAIR AND REPLACEMENT OF ALL TYPE OF NEW MAP AND MISC FURNITURE ARTICLES AT GE FARIDKOT MIL STN

Amount

SCHEDULE 'A' PART-I (WOODEN FURNITURE ITEMS)

BED HARD WOODEN : FD/MAP/01

Taking out old cracked/broken long rail and supply & fixing new long rail of size 75x50x1920mm long, made out of Ist class seasoned hard wood duly wrought all as specified and directed.

Taking out old unserviceable plywood top and S&F plywood BWR, commercial of size 1800x900x12mm thick on top of bed fixed with screw wood steel all as specified and directed.

Dismantling old unserviceable stiffner and S&F new stiffener of Ist class seasoned hard wood complete all as specified and directed.

Removing old unserviceable Head rest and S& F new head rest made out of 2nd class soft wood, covered on both side with 3.5mm thick BWR plywood having one side teak faced all as specified and directed.

Removing old unserviceable cushion foam back and S&F new 800x300x50mm thick cushion foam having density 40, covered with superior quality Leatheriest rexene with best upholtery all as specified and directed.

Removing old unserviceable Foot rest and S & F new Foot rest made out of 2nd class soft wood duly covered on both side with 3.5 mm thick BWR plywood having one side teak faced all as specified and directed.

Dismantling old unserviceable clamps and S&F new mild steel clamp of flat iron 35x6mm ,150mm long made to shape and provided at corner leg long rail with wooden screws complete all as specified and directed.

M & L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

BIN SOIL LINEN MULTIPURPOSE : FD/E6/MAP/09

Removing old unserviceable existing top and S&F new top made of 18 mm pre-laminated particle board, exterior grade complete all as specified and directed.

Removing old unserviceable existing shutter and S&F new shutter made of 18 mm pre-laminated particle board, exterior grade complete all as specified and directed.

Removing old unserviceable existing sides and S&F new sides made of 18 mm pre-laminated particle board, exterior grade complete all as specified and directed.

Removing old unserviceable existing drawer and S & F new drawer made of 18 mm pre-laminated particle board, exterior grade complete all as specified and directed.

Removing old unserviceable existing back ply and S & F new back made of 12 mm plywood BWR, commercial complete all as specified and directed.

Removing old unserviceable existing hinges and S&F new oxidized piano type hinges, confirming to IS-3818, fixed with steel screw 15 mm long of side board complete all as specified and directed.

Removing old unserviceable existing handle and S&F new mild steel powder coated handle, 100 mm long, for shutter & drawer complete all as specified and directed.

Removing old unserviceable existing ball catcher and S&F new magnetic catcher fixed on top and bottom edge of the shutter of side board complete all as specified and directed.

M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

CHAIR DINING LONG BACK FD/MAP-II/04

Dismantling existing unserviceable rear leg and S&F new rear leg of Ist class seasoned hard wood all as specified and directed.

Dismantling existing unserviceable front leg and S&F new front leg of Ist class seasoned hard wood all as specified and directed.

Dismantling existing unserviceable side rail and S&F new side rail of Ist class seasoned hard wood all as specified and directed.

Dismantling existing unserviceable front rail and S&F new front rail of Ist class seasoned hard wood all as specified and directed.

Dismantling existing unserviceable back rail of seat and S&F new back rail of seat of Ist class seasoned hard wood all as specified and directed.

Dismantling existing unserviceable centre stiffener and S&F new centre stiffener of Ist class seasoned hard wood all as specified and and directed.

Removing of old unserviceable cushion of seat and S&F of new cushion in the size of 18"x18"x75mm of density 40 covered with superior quality leatheriest rexene with best upholtery to seat of chair all as specified and directed.

M & L for french polishing to wooden surfaces after preparation of smooth surfaces complete all as specified and directed.

CHAIR DINING : FD/MAP-II/05

Dismantling existing unserviceable rear leg and S & F new rear leg of 1st class seasoned hard wood complete all as specified and directed.

Dismantling existing unserviceable front leg and S & F new front leg of 1st class seasoned hard wood complete all as specified and directed.

Dismantling existing unserviceable side rail and S & F new side rail of 1st class seasoned hard wood complete all as specified and directed.

Dismantling existing unserviceable front rail and S & F front rail of 1st class seasoned hard wood complete all as specified and directed.

Dismantling existing unserviceable side stiffener and S & F new side stiffener of 1st class seasoned hard wood complete all as specified and directed.

Dismantling existing unserviceable center stiffener and S & F new center stiffener of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable plastic seat and S&F new PVC seat 4 x 10 mm thick ribs moulded . PVC seat 4 mm thick with holes and weight of the PVC seat shall not be less than 0.50 kg.

M & L for french polishing to wooden surfaces after preparation of smooth surfaces complete all as specified and directed.

MIRROR DRESSING (GENTS): FD/E6/MAP/16

Dismantling existing old unserviceable ply from back and S & F new 12 mm thick plywood of size 1200mm X 600mm ,commercial, BWR quality complete all as specified and directed.

Dismantling unserviceable frame and S&F new frame of 1st class seasoned hard wood of section 50 mm x 28 mm and of size 1200 mm x 600 mm complete all as specified and directed.

Removing old unserviceable piano type hinges and S & F new oxidized piano type hinges conforming to IS-3818, fixed with steel screw complete all as specified and directed.

Dismantling existing unserviceable leg and S & F new leg of 1st class seasoned hard wood of section 38 x38X 450mm long and top side bracket cut of size 38 x112 x112 mm complete all as specified and directed.

Removing existing cracked/ broken glass shelves and S&F new glass shelves of size 100 x 600mm x 5.5mm thick complete all as specified directed.

Removing of existing cracked/ broken looking mirror and S&F new looking mirror of size 1200 x 600 mm x 5.5mm thick complete all as specified and directed.

M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

SIDE BOARD : FD-1112

Dismantling old unserviceable top and S & F new top of size 1025x450mm made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Dismantling old unserviceable shutter and S& F new shutter made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Dismantling old unserviceable drawer and S& F new drawer made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Dismantling old unserviceable sides and S&F new sides of size 750x450 made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and and directed.

Dismantling old unserviceable back and S& F new back of size 1025x750mm made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Dismantling old unserviceable shelf and S & F new shelf made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Removing old unserviceable oxidized piano type hinges and S&F new oxidized piano type hinges confirming to IS-3818, with steel screw 15 mm long complete all as specified and directed.

Removing existing unserviceable handle and S&F new mild steel powder coated handle,100 mm long for door shutter and drawer complete all as specified and directed .

Removing existing unserviceable ball catcher and S&F new magnetic catcher fixed on top and bottom edge of the shutter complete all as specified and directed.

M & L for french polishing to wooden surfaces after preparation of smooth surfaces complete all as specified and directed.

STOOL DRESSING WITH CUSHION : (FD-374)

Removing old unsv existing dunlop cushion seat and S&F new dunlop cushioned seat of hard variety complete all as specified and directed.

All as per ser item No 10 here-in-before but removing old unsv side and supply and fixing new side made out of prepaminated particle board 18mm thick exterior grade complete all as specified and directed.

TABLE DRESSING LADIES FD-251, FD-32(M) & FD/MAP-II/10

Dismantling old unserviceable ply wood from back of mirror and S&F new 6mm thick plywood, commercial, BWR quality of mirror frame complete all as specified and directed.

Dismantling old unserviceable drawer and S&F new drawer of 12mm thick prelaminated particle board with knob 25mm dia all as specified and directed.

Dismantling old unserviceable legs and S&F new leg of Ist class seasoned hard wood wood complete all as specified and directed.

Dismantling old unserviceable glass shutter and S & F new glass shutter of 5mm thick of required size complete all as specified and directed.

Dismantling old unserviceable door shutter and S&F new door shutter of 12mm thick prelaminated particle board all as specified and directed.

Dismantling unserviceable frame of looking mirror and S&F new frame of section 20mm x 25mm made of Ist class seasoned hardwood , made to shape as shown on drg and 12mm x 12mm in section teak wood beading at the back complete all as specified and directed.

Removing existing unserviceable handle and S&F new stainless steel powder coated anodized handle complete all as specified and directed .

Dismantling unserviceable knob and S&F new aluminium anodized knob of 25mm dia with nut & washer complete all as specified and directed.

Dismantling old unserviceable looking mirror and S&F new looking mirror of size 366x1220x5mm thick complete all as specified and directed.

Removing old unserviceable existing dunlop cushion seat and S&F new dunlop cushioned seat of size 349mmx340mmx40mm,density 40, covered with superior quality tapestry cloth with best upholstery complete all as specified and directed.

Removing old unserviceable side and S&F new side made out of 18 mm thick prelaminated particle board , exterior grade complete all as specified and directed.

Removing old unserviceable castor and S&F new castor 50mm dia, made of PVC, fitted with bottom of stool dressing complate ete all as specified and directed.

Dismantling old unserviceable looking mirror and S&F new looking mirror of size 1300x450x5.5mm thick complete all as specified and directed.

M & L for french polishing to wooden surfaces after preparation of smooth surfaces complete all as specified and directed.

TABLE CENTRE 900 x450x 460mm : FD-274

Dismantling old unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and directed.

Dismantling old unserviceable long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and directed.

Dismantling old unserviceable short top rail and S&F new short top rail of 1st class seasoned hard wood complete all as specified and directed.

Dismantling old unserviceable side stiffener and S&F new side stiffener of 1st class seasoned hard wood complete all as specified and directed.

Dismantling old unserviceable top and S&F new top of 18mm thick prelaminated particle board,of size900x450mm including 4mm thick teakwood beading alround complete all as specified and directed.

M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

TABLE BED SIDE (MAP) : FD/E6/MAP/15 (R)

Dismantling existing unserviceable top and S&F new top made out of pre-laminated particle board 18 mm thick, exterior grade with 4 mm thick teakwood beading alround the top complete all as specified and directed.

Dismantling existing unserviceable drawer and S&F new drawer made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Dismantling existing unserviceable bottom and S&F new bottom made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Dismantling existing unserviceable sides and S&F new sides made out of pre-laminated particle board 18 mm thick, exterior grade complete all as specified and directed.

Gas welding to frame made of 18mm mild steel square pipe complete all as specified and directed. Note :-Welding alround shall be considered as one point.

Dismantling existing unserviceable front legs and S&F new front legs made out 18mm thick mild steel square pipe of size 20x20mm having length 500mm, fixed with steel screw duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and and directed.

Dismantling existing unserviceable 'U' shaped legs and S&F new 'U' shaped legs made out 18mm thick mild steel square pipe of size 20x20mm having length 600mm, fixed with steel screw duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Removing existing unserviceable handle and S&F new mild steel powder coated handle 100 mm long for drawer complete all as specified and directed .

Provision of PVC hard rings at the bottom of legs

Removing old unserviceable back and S&F new back of 6 mm thick commercial BWR plywood with headless nails complete all as specified and directed.

M & L for french polishing to wooden surfaces of table bed side after preparing the surfaces smooth complete all as specified and directed.

TABLE DINING 120 X90 cm : FD/MAP-II/03

Removing old unserviceable existing top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced, of size1200x950mm including 4mm thick teakwood beading allround complete all as specified and directed.

Removing old unserviceable existing long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing legs and S&F new legs of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing stiffener and S&F new stiffener of 1st class seasoned hard wood, fixed with dove tail joint complete all as specified and directed.

Removing old unserviceable existing corner bracket and S&F corner bracket of 1st class seasoned hard wood, made to shape at top of leg & frame fixed with screws complete all as specified and directed.

M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

TABLE DINING 6 PERS: FD/MAP-II/03/FD-273 / FD-374

Removing old unserviceable existing top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced, of size1500x900mm including 4mm thick teakwood beading alround complete all as specified and directed.

Removing old unserviceable existing long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing legs and S&F new legs of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing stiffener and S&F new stiffener of 1st class seasoned hard wood, fixed with dove tail joint complete all as specified and directed.

Removing old unserviceable existing corner bracket and S&F corner bracket of 1st class seasoned hard wood, made to shape at top of leg & frame fixed with screws complete all as specified and directed.

M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

TABLE DINING 8 PERS: FD/MAP-II/03/FD-273 / FD-374

Removing old unserviceable existing top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced, of size1800x900mm including 4mm thick teakwood beading alround complete all as specified and directed.

Removing old unserviceable existing long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing legs and S&F new legs of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing stiffener and S&F new stiffener of 1st class seasoned hard wood, fixed with dove tail joint complete all as specified and directed.

Removing old unserviceable existing corner bracket and S&F corner bracket of 1st class seasoned hard wood, made to shape at top of leg & frame fixed with screws complete all as specified and directed.

M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

TABLE WRITING : FD-275

Removing old unserviceable existing top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced and other side balancing white, of size1145x600mm including 4mm thick teakwood beading allround complete all as specified and directed.

Removing old unserviceable existing long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and directed.

Dismantling old unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing Side Stiffener and S & F new side stiffener of 1st class hard wood complete all as specified and directed.

Removing old unserviceable existing center stifferer and S & F new center stiffener of 1st class seasoned hard wood complete all as specified and directed.

Removing old unserviceable existing drawer and S & F new drawer of 1st class seasoned hard wood with knob 25mm dia complete all as specified and directed.

Removing old unserviceable existing shutter and S & F new shutter of 18mm thick prelaminated particle board, one side natural teak face and other side balancing white with piano hinges, knob 25mm dia and lock with duplicate key complete all as specified and directed.

Removing old unserviceable existing hinges and S & F new oxidized piano type hinges fixed with steel screw 15mm long of side board complete all as specified and directed.

M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.

TV Trolley (FD/E6/MAP/04(R)

Removing old unserviceable existing top and S & F new top made of 18mm pre-laminated Particle board, exterior grade including stanard PVC edging alround complete all as specified and directed.

Removing unserviceable existing glass of shutter & stainless steel channel and S & F 5.5mm thick glass & stainless steel channel duly screwed alongwith handle and magnetic catcher complete all as specified and directed.

Removing old unserviceable existing castor wheel and S & F new 50mm dia swivel type castor wheel on bottom of trolly complete all as specified and directed.

M & L for french polishing to wooden surfaces after preparation of smooth complete all as specified and directed.

SCHEDULE 'A' PART-II (STEEL FURNITURE/ BRANDED FURNITURE/ TRADE PATTERN ITEMS)

BED HARD STEEL : FD/E6/MAP/08(R)

Taking out old unserviceable plywood of top and S&F new top of 12mm thick plywood BWR, commercial of size 1974mm x 824mm, fixed with screw wood steel all as specified and directed.

Taking out old unserviceable foot board and S&F new foot board of 18 mm thick pre- laminated particle board, both sides decorative of size 650mm x 300 mm complete all as specified and directed.

Taking out old unserviceable head board and S&F new head board of 18 mm thick pre- laminated particle board, both sides decorative of size 650mm x 200 mm complete all as specified and directed.

Dismantling unserviceable stiffener and S&F new stiffener, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specifed and directed.

Removing old unserviceable head rest and S&F of new head rest made to shape, out of 38 mm square tube outer frame and section tube 18mm square having wall thickness1.6mm with gas welding and one coat of primer complete all as specifed and directed.

Removing old unserviceable foot rest and S&F of new foot rest made to shape, out of 38 mm square tube outer frame and section tube 18mm square having wall thickness1.6mm welded with gas welding and one coat of primer complete all as specifed and directed.

Taking out old unserviceable long rail and S&F new long rail made out of 20 mm x65 mm 1.6mm, made of MS square pipe and one coat of primer complete all as specifed and directed.

Removing old unserviceable shoe and S&F new PVC rubber shoe of size 38mm at bottom of the leg complete all as specified and directed.

Gas welding of broken spot of 25mm dia pipe complete all as specified and directed.

M&L for denting & painting of steel surfaces, exposed to view when placed in position and applying two coats of synthetic enamel black paint after preparation of old surfaces complete all as specified and directed.

CHAIR REVOLVING STEEL WITH ARMS : FD-75

Removing of unserviceable cushion seat, padded back with upholestered leather/tapestry cloth, padded cushion of arms and providing new cushion seat of density 40mm, padded back with upholestered leather/tapestry cloth, padded cushion of arms complete all as specifed and directed.

M&L for replacement of unserviceable bearing of revolving chair as per existing complete all as specified and directed.

M&L for replacement of unserviceable wheel of chair as per existing complete all as specified and directed.

M&L for replacement of hydroulic fittings of chair as per existing complete all as specified and directed.

M&L for replacement of base assembly of chair as per existing complete all as specified and directed.

CHAIR WRITING STEEL : FD/E6/MAP/12

Removing unserviceable cushion seat & back with upholestered tapestry cloth including PVC beading and providing New cushion seat & back of density 40mm with upholestered tapestry cloth not less than Rs 250 per meter including PVC beading and providing in serviceable condition duly repaired in all respect complete all as specifed and directed.

S&F in replacement unserviceable arms handle black integral skin made of ply propylene, co-polyme/ polyurethene with 75-56 share hardness complete all as specifed and directed.

M&L for preparation of old painted surfaces and applying one coat of snythetic enamel paint (black colour) complete all as specified and directed.

CHAIR COMPUTER (TP)

Removing unserviceable cushioned seat & back padded with upholestered tapestry cloth and providing the same with new materials of same or superior quality and repair/removing of unserviceable parts of tilting mechanisam with swivel system and providing in serviceable condition duly repaired in all respect as directed.

Replacing the existing unserviceable bearing with new bearing of same or superior quality complete all as specified and directed.

Replacing the existing unserviceable wheel with new wheel of same or superior quality complete all as specified and directed.

Replacing the existing unserviceable hydrolic fitting with new hydrolic fitting of same or superior quality complete all as specified and directed.

Replacing the existing unserviceable base assembly with new base assembly of same or superior quality complete all as specified and directed.

CHAIR CB STEEL WITH/WITHOUT ARMS : FD-75(M)

S&F MS flat size 500x20x5mm thick with gas welding to chair CB steel with arms 02 Nos to each chair under seat joining both ends duly painted with synthetic enameled OG paint after applying one coat of primer complete all as specified and directed.

All as per Ser item No 22.01 above but size 420x20x5mm thick to chair CB steel without arms 2 Nos to each chair complete all as specified and directed.

All as per Ser item No 22.01 above but S&F of seasoned 2nd class hard wood seat frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern complete all as specified and shown on drawing.

All as per Ser item No 22.01 above but suitable for chair CB steel tubular without arms.

All as per Ser item No 22.01 above but S&F seasoned 2nd class hard wood back frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true godrej pattern complete all as specified and directed.

All as per Ser item No 22.01 above but S&F of arms to chair CB steel with arms made out of well seasoned 2nd class hard wood duly painted with two coats of synthetic enamel black paint as directed.

All as per Ser item No 22.01 above but spary painting to steel frame complete chair CB steel with arms as shown on drawing after preparation of surface with synthetic enamel OG Paint.

CHAIR CUSHIONED WITH ARMS (TP)

Replacing unserviceable arms handle, made of ply propylene ,co-polyme complete all as specified and directed.

Removing unserviceable cushion seat & back with upholestered tapestry cloth and PVC beading and S&F fabric & moulded polyurethane foam with PVC lipping (beading) all round of seat,foam density 40 with upholestered tapestry cloth (providing New materials in superior quality) complete all as specified and directed.

M&L for preparation of old painted surfaces of chair cushioned with arms and applying one coat of snythetic Enamel paint (black colour) complete all as specified and directed .

RACK ADJUSTABLE STEEL 7 SHELVES OPEN TYPE 2175MM X 900MM X 500MM

Re-setting of existing dislocated shelves of rack adjustable steel 7 shelves open type of size 2175mmx900mmx500mm by providing with appropriate size of clams, nut and bolts to reset the shelves at their place rest all as shown on drg and directed by Engineer-in-Charge

Preparation of existing painted steel surfaces of rack adjustable steel 7 shelves open type of size 2175mmx900mmx500mm inside and outside by carrying,Filling putty and scrapping with sand paper wher required and applying one coat of synthetic enamel olive green paint . Note : Painting Shall be done in BSO Yead or unit line with written approval of Engineer-in-Charge.

SIDE RACK STELE WITH TRAY THREE SPACES (FD-1023)

Re-setting of existing dislocated side rack steel with tray three spaces by providing with appropriate size of clamps, nut and bolts to reset the shelves at their place complete all as specified and directed.

Preparation of existing painted steel surfaces of side rack steel with tray three spaces inside and out side by carrying out denting. Filling putty and scrapping with sand paper where required and applying one coat of synthetic enamel olive green paint complete all as specified and directed. Note : Painting Shall be done in BSO Yead or unit line/quarter with writeen approval of Engineer-in-Charge.

TABLE BED SIDE STEEL : DRG No HFD/2005

Dismantling existing unserviceable top and S&F new top of size 400mmx400mm, made of 18mm thick prelaminated particle board, one side natural teak wook and other commericial including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and directed.

Dismantling existing unserviceable shutter and S&F new shutter made out of 1 mm thick PBI sheet including one coat of primer complete all as specifed and directed.

M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note :- Welding alround shall be considered as one point.

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed.

TABLE DINING OR : FD-165

Dismantling unsv leg and S&F new leg,760mm high, made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding and one coat of primer complete all as specified and directed.

Dismantling unsv long rail and S&F new long rail, made ot shape, out of 25 mm square tube having wall thickness 1.6mm by gas welding and one coat of primer complete all as specified and directed.

Dismantling unsv short rail and S&F new short rail, made ot shape, out of 25 mm square tube having wall thickness 1.6mm by gas welding and one coat of primer complete all as specified and directed.

Dismantling unsv centre stiffener and S&F new centre stiffener, made ot shape, out of 25 mm square tube having wall thickness 1.6mm by gas welding and one coat of primer complete all as specified and directed.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed.

Removing of old existing unserviceable top and S&F new table top of size 1900mm x 565mm, made out of 18mm thick MDF board, commercial type,( ISI marked) duly covered with aluminium sheet 22 gauge, of required size complete all as specified and directed.

M&L for Gas welding to broken parts of frame alround (wherever required) and grinding to smooth finish complete all as specified and directed. Note :- Welding alround shall be considered as one point.

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of chair CB steel after preparation of surface complete all as specified and directed

TEAPOY VERANDAH : FD/E6/MAP/17

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wood and other white(interior grade) of size 900x450mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and directed.

Dismantling unserviceable leg and S&F new leg made to shape, out of 19mm square tube having wall thickness18 gauge by gas welding complete all as specified and directed.

Dismantling unserviceable long rail and S&F new long rail made to shape, out of 19mm square tube having wall thickness18 gauge by gas welding complete all as specified and directed.

Dismantling unserviceable short rail and S&F new short rail made to shape, out of 19mm square tube having wall thickness18 gauge by gas welding complete all as specified and directed.

S&F Gas welding to broken parts of frame throughout and grinding to smooth finish complete all as specified and directed. Note :- Welding alround shall be considered as one point.

TABLE STEEL WITH/WITHOUT DRAWER 900X600X760 MM (FD-1007 & FD-1008)

Dismantling unserviceable leg and S&F new leg made to shape, out of 25mm square tube having wall thickness1.6mm by gas welding complete all as specified and directed.

Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wood and other white (exterior grade) of size 900x600mm including providing 4mm thick teak wood beading alround the top after french polished complete all as specifed and directed.

Dismantling existing unserviceable drawer and S&F new drawer made out of 1 mm thick PBI sheet including one coat of red oxide primer complete all as specifed and directed.

S&F in replacement of brass lock to the table by appropriate size steel screws / rivets complete all as specified and directed.

Removing old existing unserviceable leg shoes and S&F new PVC hard rubber shoes of approved quality to bottom of leg complete all as specified and directed.

M&L for welding of crack joints throughout, riveting where required and spray painting with one coat of synthetic enamel paint after preparation of steel surfaces complete all as specified and directed.

TRESTLE STORE ROOM STEEL : FD-1043

Taking down old damaged top long angle Iron and S&F new top MS angle iron of size 40mmx40mmx 6mm of length 2490 mm, including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed and directed.

Taking down old damaged bottom long angle Iron and S&F new bottom MS angle iron of size 40mmx40mmx 6mm of length 2030 mm, including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed and directed.

Taking down old damaged top/bottom short angle Iron and S&F new top/bottom short MS angle iron of size 40mmx40mmx 6mm of length 500 mm, including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed and directed.

Taking down old damaged top bracing and S&F new top bracing made out of flat iron of size 50mmx3mm ,made to shape including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed and directed.

Taking down old damaged vertical bracing and S&F new vertical bracing made out of flat iron of size 50mmx3mm ,made to shape including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed and directed.

Taking down old damaged strut and S&F new strut made out of flat iron of size 50mmx3mm ,made to shape including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed aand directed.

Taking down old damaged top triangular and S&F new top triangular of MS angle iron of size 50mmx50mmx 6mm of length 500 mm, including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed and directed.

Taking down old damaged top horizontal triangular and S&F new top horizontal triangular of MS angle iron of size 50mmx50mmx 6mm of length 300 mm, including gas welding and one coat of red oxide primer after preparation of surfaces complete all as specifed and directed.

S&F gas welding to broken parts of trestle store room throughout and grinding to smooth finish complete all as specified and directed. Note:- Welding alround shall be considered as one point.

Preparation of existing painted steel surfaces (inside and outside) by carrying out denting,scraping old paint with sand paper, filling putty (where required) and applying one coat of synthetic enemel (olive green) paint with spray gun complete all as specified and directed.

B K CONTRACTORS

Vinod Kumar Bajaj