Day to day maint of certain bldg at Tibri, GSR, DBN, Shikar, Kasowal, Batala, Bhole ka Bagh area and certain repair to roof, chajja, facia, parapet, shafts in OTM Accn under AGE B/R-I at GE Gurdaspur.

Taking down shutters of any description exc 1.00 sqm & n exc 2 sqm each. & refixing in the same opening after easing & adjusting.

Repairs, easing & adjusting of shutter without taking off shutters of any description exc 1.00 sqm & nexc 2 sqm each.

S&F in repair stainless steel wire cloth, 0.40 mm nominal dia of wire and average width of apperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putt in squares nexc 0.50 Sqm each incl hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed.

S&F 4.8mm thick black sheet glass ordinary quality and glazing in squares or rectangular not exceeding 1.00 sqm in each pane in aluminium door or window shutter incl rubber beading of sides as required incl hacking out of old broken glass panes from aluminium frame complete all as specified and directed.

S&F in repair aluminium alloy handles fabricated type size 125mm complete all as specified and directed.

S&F in repair butt hinges 100mm size medium weight cold rolled mild steel of any frame as wooden/metal through nut & bolt/welding complete all as specified and directed.

S&F in repair butt hinges 75mm size medium weight cold rolled mild steel of any frame as wooden/metal through nut & bolt/ welding complete all as specified and directed.

S&F in repair 150mm long aluminum anodized barrel tower bolt of extruded section and fixed all as specified.

S&F in repair 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or extruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy all as specified and directed.

S&F in repair 140mm floor door stopper of aluminimum alloy body and tongue anodized with hard drawn steel spring complete all as specified and directed.

S&F in repair 300mm mild steel ordinary rat tail rod pattern spring incl roller plate with nut & bolt/ welding complete all as specified and directed.

S&F in repair 18/19 mm thick one side prelaminated colour WPC board for cup board shutter and frame & fixed at site complete alll as spcecified and directed. (Note : Board edges shall be properly fnished with strip on band edges).

S&F in repair 18/19 mm thick white WPC board for cup board shutter and frame & fixed at site complete alll as spcecified and directed. (Note : Board edges shall be properly fnished with strip on band edges).

S&F in repair auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed.

S&F in repair 100mm size stainless steel handle for kitchen cabinet shutters complete all as specified and directed.

S&F ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 Kgs complete all as specified and directed.

S&F chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed.

S&F chromium plated stainless steel wire basket (bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed.

Supply and fixing in repair cutrain rod 20mm dia of Mild steel with PVC Coated with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed.

Supply and fixing in repair drapery rod in any length, high strength Stainless Steel pipe having outer dia 25 mm with a pair of brakets of any shape/design complete all as specified and directed .

M&L for petty repair to existing in built aluminium door, locks, hinges incl necessary making the lock/glass/ adjusting shutter complete serviceable all as per existing pattern as directed by Engineer-in-Charge incl provision of duplicate keys as required.

S&F in repairs mortice lock, aluminium vertical type size 65mm 2 levers complete all as specified and directed.

S&F in repairs door closer hydraulicaly regulated, univarsal type, aluminium (die cast ) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair corner high grade ABS shelf assembly with brackets (set of 03 pieces) complete all as specified and directed.

S&F in repair PVC cabinet with mirror for bathroom 54cmx34cmx13cm, fancy type, white or coloured complete all as specified and direcetd by Engr-in-charge.

S&F in repair tubular, towel rail aluminium anodised 20mm dia, 60cm long between flanges all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethylene 3-layer water storage tanks white (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including demolition of existing water tanks complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene 3-layer water storage tanks white (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including demolition of existing water tanks complete all as specified and directed.

S&F 2000 ltr capacity rotational moulded polyethylene 3-layer water storage tanks white (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including demolition of existing water tanks complete all as specified and directed.

S&F in repair 20 mm ball brass valve high pressure with polythene float and fly nut screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair stop valve 20mm dia cast copper alloy , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union all as specified and directed.

S&F in repair PVC cover with fitting for PVC water tanks of capacity exc 250 ltr but not exc 1000 ltr fixed in repairs complete all as specified.

Material & labour for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc water storage tanks exc 250 ltr & n.exc 500 ltrs including disinfecting the tank, writing letters with paint for date of cleaning complete all as specified and directed by Engr-in-Charge.

Material & labour for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc water storage tanks exc 500 ltr & n.exc 1000 ltrs including disinfecting the tank, writing letters with paint for date of cleaning complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings including taking u

p and down complete all as specified and directed.

Refixing and including taking up and down and making connection 15mm dia steel tubing and connection in new or old position with new fittings (in wall ceiling floors etc) all as specified and directed.

S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings including taking up and down complete all as specified and directed.

Opening of air lock/blockage in GI pipe line from outlet of water tank to all internal GI pipes/fittings to smooth flow of water from bib taps /showers/ WHB pillar tap/ stop valves complete by air pressure /water gravity pressure all as specified.

Taking up or down and refixing and making connection 20mm dia steel tubing in new or old position with new fittings and cleaning (in wall ceiling floors etc)all as specified and directed.

S&F PVC (SWR) pipes 110mm dia in any length with rubber ring joint fixed to wall/floor upto 12m height complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia in any length with rubber ring joint fixed to wall/floor upto 12m height complete all as specified and directed.

Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar including taking out of trenches, if required.

S&F in repair PVC (SWR) bends 110mm dia of any radius, complete all as specified and directed.

S&F in repair PVC (SWR) bends 75mm dia of any radius, complete all as specified and directed.

S&F in repair bib taps 15mm dia cast copper alloy chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair stainless steel grating 125 mm dia complete all as specified.

S&F in repair stack clamps (75 mm pipe) out of 20mm x1.5 mm galvanised mild steel flat incl stays, bolt and nuts, securing ends of stays to wall or roof complete all as specified and directed.

S&F in repair stainless steel kitchen sink coupling 100mm dia complete all as specified and directed.

S&F in repair urinal waste pipe 32mm dia, 800mm long with cup and nuts fixed to urinal complete all as specified & directed

S&F in repair PVC connections 15mm dia and 600mm long with PTMT nuts all as specified and directed.

S&F in repair PVC waste pipe 32mm dia 800mm to 1000 mm long fixed to wash fitting of wash basin and sink all as specified and directed.

S&F in repair brass CP waste coupling 32mm dia for WHB complete (half and full threaded) all as specified and directed.

S&F in repair stack clamps (110 mm pipe) out of 20mm x 1.5mm galvanised Mild steel flat incl stays, bolt and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repair stainless steel kitchen sink with draining board, made out of 01mm thick sheet for kitchen with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair pillar tap 15mm dia cast copper alloy along with capstan heads chromium plated screwed down high pressure with or with out lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe all as specified and directed.

S&F in repair stop valve 15mm dia cast copper along fancy type chromium plated with long shank and cup concealed type all as specified and directed.

S&F in repair vitreous china urinal, 345X320X560mm half stall type, white (excluding flushing cistern) including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement, grating and union for discharge pipe incl brass CP waste coupling, waste pipe, brass CP urinal spreader complete all as specified and directed.

S&F in repair stop valves or angle valve cast copper alloy 15mm bore fancy type chromium plated alloy with butterfly handle screwed down for high pressure, screwed on both ends, fixed with iron pipe etc complete all as specified and directed.

S&F in repair for vitreous China wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including plastic water closet seat cover white with stainless steel L-type jet spray with 1 m hose pipe, closed pattern with flat bottom and cover, mild steel chromium plated or aluminized hinging device incl P or S trap with connection complete all as specified and directed.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with PVC `P’ or `S’ trap, integral foot rest including connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. (Note:- Flush pipe and flushing cistern shall be measured and paid for separately).

S&F in repair plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.

S&F in repair vitreous China wash hand basin, with pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and waste coupling PTMT (half or full threaded) bore of discharge pipe 32 mm (min wt. 45 gms), cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified as directed

S&F in repair PVC, 10 lts capacity syphonic action dual type flushing cistern low level, white with inlet, ball valve float and handle incl brackets complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size with 225 mm arm swivel joint fancy type complete all as specified and directed.

S&F in repair stainless steel L-type jet spray with 1 m hose pipe for fitting in WC complete all as specified and directed by Engineer-in-Charge.

M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado including demolition of existing tile and screed complete all as specified.

S&F in repair urinal spreader of brass CP any colour for fixing with 15 mm dia pipe complete all as specified and directed.

S&F in repair stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified.

S&F in repair toilet paper holder flat recessed type stainless steel complete all as specified and directed by Engineer-in-Charge.

M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including demolition of existing tile and screed complete all as specified.

S&F in repair stainless steel cockroach trap with hole, round 101mm dia complete all as specified and directed.

S&F in repair stainless steel towel ring brass chromium plated with flange fixed to wall with PVC rawl plug and cadmium plated brass screw complete all as specifed and directed.

S&F in repair Vitreous china coloured one piece WC Italion finish pedestal pan with attached vitreous china flushing cistern (monolithiic type) of push button type having dual flushing cistern of same colour including pvc seat cover same colour including brass CP Jet chromium plated with pvc connection with PTMT nuts 15mm bore complete all as specified and directed.

S&F in repair 15 mm brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair flush pipe of polyethylene of low or high density or PVC. 32 mm dia, long bend, for low level cistern complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description on brick walls on concrete surfaces etc including racking out joints hacking for key,scrubbing down with water etc from walls and ceiling surfaces of any description complete all as specified and directed.

M&L for rendering 12mm thick with ready mix mortar on brick or concrete surfaces of walls, finished surface even and smooth without using extra cement including taking down cement plaster of any description complete all as specified and directed.

S&F in repair vitreous China table top wash hand basin, white rectangular bowl, size 550X400X140mm excluding taps but including cast copper alloy CP 32mm size coupling complete all as specified and directed.

M&L for rendering 15mm thick with ready mix mortar on brick or concrete surfaces of walls, finished surface even and fair with WPC upto ht. 12 mtr including taking down cement plaster of any description, complete all as specified and directed. (Note : WPC shall be measured and paid for separately).

M&L for rendering 5mm thick with ready mix mortar on ceiling finished surface even and smooth without using extra cement including taking down cement plaster of any description complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coats of cement base paint on wall all as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface and applying two coats of oil bound distemper on wall over a coat of wall care putty and chalk whiteing primer on plastered surface wall complete all as specified and directed.

M&L for preparation of newly plastered surface and applying three coats of white wash on wall complete all as specified and directed.

Roughing the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/mud etc.and applying a coat of Nitobond SBR cement slurry (1 Vol of Nitobond SBR + 1 vol of water + 3 vol of cement) water proofing coating on roof complete all as specified and directed.

M&L for removing existing pointing, raking out joints & flush pointing to bricks laid flat or brick tiles in pavings or brick tiles on roof with CM (1:3) including cleaning the surface grass, mud and the like complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding averaging thickness of 50 mm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non woven fabric (weight not less than 150 gms/ Sqm) laid on applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m by forced application with butane torch over entire roof area with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in after cleaning surface complete all as specified and directed and all as per manufacturer's instructions.

Supply only integral water proofing compound.

M&L for prepartion of newly plastered surface and applying two coats of aluminum paint on above of APP membrane complete all as specified and directed.

M&L for complete removing of existing treatment from wall / ceiling by using mechanical sander/grinder, complete all as specified and directed.

M&L for preparation of scarpped surfaces of wall / ceiling and applying 1 to 1.5mm thick acrylic damp proof wall care putty as per manufacturers instructions, complete all as specified and directed.

M&L for preparation of puttied wall / ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer, complete all as specified and directed

M&L for preparation of puttied wall / ceiling and applying two coats of 100% premium exterior acrylic emulsion paint of apex ultima or equivalent having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additives complete all as specified and directed.

&L for repairing of RCC projections, chajjas, roofs, facia etc. by chipping off existing loose, damaged Concrete and applying two coats of polymer modified cementitious mortar on epoxy bond coat on dry sub strate & free from debries / dust surfaces of concrete complete all as specified and directed by the manufacturer's. (Note: - Cost of formwork and welded mesh, bldg height upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor).

Taking down existing unserviceable rolling shutters of any type any size and refixing the same in same position after necessary welding work, oiling and greasing, replacement of unserviceable bearings, realignment of anchoring rod, checking and made functional / operate able all moving strips/ parts to the entire satisfaction of the engineer in charge complete including replacing of damaged strips all as specified. (Note :- (i) Strips shall be measured & paid separately as supply only under appropriate item. (ii) Rates are deemed to inclusive of all civil works required for refixing and making good the disturbed surfaces).