SPECIAL REPAIR/RESURFACING TO EXISTING ROAD (NPR) TOWARDS BP-36 AT DFFR ROADS, S OF A, DEOLALI UNDER GE DEOLALI

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) all as specified and directed.

M&L 7.5cm thick (compacted thickness) WBM, with coarse agregates of granite, trap or basalt of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required all as approved by GE

M&L for 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013 rolled and consolidated to gradient and camber required with power roller all as approved by GE

M&L for preparing existing WBM/WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (Paving VG - 10 grade bitumen) @ 7.50 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber with power roller (consolidated thickness 75mm or less) with binder content (paving VG - 30 grade bitumen) of min. 4% by weight of total mix all as specified & directed. Note: 4% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 9.1 of Particular specifications and no price adjustment shall be made for plus side variation.

M&L for preparing on existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming/ tack coat with bituminous primer (paving VG - 10 grade bitumen) @ 2.50 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous semi-dense asphaltic concrete 30mm consolidated thickeness laid using mechanical paver for any width of road with max 5.0% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed. Note : 5.0% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Clause 9.1 of Particular specifications

M&L for painting line, dashes, arrow, letters etc. on road pavement (parking etc.) providing & applying 2 mm thick road marking strips (reflective) of specified shade /colour using hot thermoplastic material fully / semi-automatic application machine fitted with profile shoe heater driven by experienced operator on road surfaces including preparation of previously treated surfaces , cleaning surfaces of all dirt, scales, oils, grease & foreign materials etc. complete all as specified and directed by Engineer- in- charge.

Demolition of cement concrete (Unreinforced) of any description and in any position not otherwise specifically provided for

M&L pavement quality cement concrete (PQC) work in pavement /hard-standing of flexural strength 40kg/per square centimetre in field using400 kg of cement per cubic metre,as per design mix laying in alternate bays over and including 400 micron HDPE sheet virgin quality, water proof, wrinkle free without puncture weighing 390gm/sqm (min) over 10mm average sand cushioning with require formwork complete all as specifide and directed.

Finishing surface of concrete roads, pavements,by brooming while concrete is green.

M&L forming 20 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 200mm thick concrete slab

M&L forming dummy joints 65mmx10mm wide filled with sealing compound Grade B using mechanical means complete all as specifide and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm depth exc 50mm and n'exc 100mm

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Supply and fix solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery 1.2V / 1600MA) consisting of super bright LED with 1,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20 mm with PAMA strplens relector of model No DA 972.0 fixed with and incl MS stud of of suitable size as per manufacturers instructions. Make 3M/Green lite

M/S Anil Enterprises

M/S K.K.BINNAR

M/s ESS KAY Construction

Ranmale Developers

SANJAY B SHARMA

Aakar Constructions