REPAIR MAINT OF INTERNAL ELECTRICATION INCL FITTING AND FIXTURES WITH CONNECTED ITEMS INTERNAL WIRING SUBMAIN WIRING DISTRIBUTION BOARDS MCCBS MCBS BUILDING SECURITY LIGHTS ETC OF MD JCOS ORS ACCN IN ME LINE AND MISC OTHER EM WORKS AT NARAYANA COMPLE

Amount

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps.

All as per the description of srl item No 2 here-in-before but one fan point controlled by one, one way switch 06 Amps.

All as per the description of srl item No 2 here-in-before but for one light point controlled by two way switches

All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per the description of srl item No 02 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per Serial Item No 02 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including sheet metal concealed boxes,cover plate, joint boxes etc complete all as specified and directed for One light /fan/ bell point controlled by one, one way switch 06 Amps.

All as per above item here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per above item here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, on here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per above item here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, on above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

M&L point wiring with PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC doubled lock Casing-Capping including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

One light point controlled by one way switch 5/6 amps.

One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

One Socket out let 5/6 amps point on the independent board

One socket out let 5/6 amps point on the same board

One bell/buzzer point controlled by one bell push button

One light point controlled by two 2 way switches

All as per the description of srl item No 12 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed.

S&F in repairs switch piano flush type 5/6 amps single pole one way complete all as specified and directed.

S&F in repairs of switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

S&F in repairs socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed.

S&F in repairs Switch socket combination 3 pin 16A, multi pin, flush type

S&F in repairs bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed.

S&F in repairs of call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified and directed.

S&F in repairs lamp holder, isolated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F in repairs deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed.

S&F in repairs 10/12W LED TL fitting (2 fit) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F in repairs on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete

S&F decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete

S&F in repairs Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts & washers complete

Taking down of existing u/s highbay lights and Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete.

Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring.

All as per the description of srl item No 28 above but for 02 x 1.5 Sqmm for phase & neutral and 01x 1.5 Sqmm for continuous earth wire

All as per the description of srl item No 28 above but 06 Sqmm nominal cross sectional area.

All as per the description of srl item No 28 above but 10 Sqmm nominal cross sectional area, four single core, with and including continuous earth wire of size 10 Sqmm nominal cross sectional area.

S&F in repairs industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete

S&F in repairs sheet metal enclosure distribution board, single pole and neutral, AC, 230 volts, 08 way, with 200 Amps rated copper bus bar and metal double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete

Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

S&F in repairs sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following :- (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts,16 KA - 01 No. (b) MCB, SP, AC, 230 volts of 06 to 32 Amps, "C" curve, 10 KA - 12 Nos.

S&F in repairs MCB, SP, AC, 230 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete

S&F in repairs MCB, DP, AC, 230 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete

S&F in repairs MCB, DP, AC, 230 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using copper lugs complete

S&F in repairs MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 100 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 63 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 40 Amps, 02 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F PVC body ventilating fan wall mounted type of 200 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed by Engineer - in - charge.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

S&F in repairs MCCB, 63 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete

S&F in repairs MCCB, 100 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed.

S&F in repairs MCCB, 125 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete.

S&F or passing through pipe, 10 Sqmm, 2 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete

S&F in repairs Supply and fixing LED luminaire 4 X 1 feet, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450MM sweep with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300MM sweep with, blades, and frame and louvers and taking down old exhaust fan and depositing to MES store yard all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc.including grouting of bolts for fixing complete and taking down old/unsv fan and deposit in E/M store yard all as directed at site by Engr-in-charge.

Supply, installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete . and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed

M&L for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete. (Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.)

Supply and fixing in repair 40 Amps 4 Pole 30 mA RCCB add on block 10 KA rated conditional short circuit current (Icc) 35 sqmm terminals, dual position DIN Clip, confirming to IEC 60947-2 and 40 Amps single pole 'C' type MCB Confirming to IS/CE Marked as per IS/IEC60898-1, rated short circuit breaking capacity Icn 10 KA, enerergy limitation class 3, line load reversiblity, 35 sqmm terminals, biconnect terminals all as specified and directed by Engr-in-charge

Supply install testing and comissioning of Building common area panel including Contactor, Analog time switch, MCB rating 40 Amps suitable for 3 phase 415 volts and having over and under voltage protection relay to protect the contactor coil, outdoor with panel locking facility, wall/floor mounted type including necessary cable lugs and gland in repairs all as specified and directed by Engr-in Charge.

S&F in repairs of 3mm thick plastic laminated sheet cover with brass screws , cup wahser and cutting of grooves for switchs,scoket and regulator etc complete for following sizes as directed.

S&F in replacement of concealed metal box 06/08 modules having high durability, corrosion resistant,earthing terminal with repalcement of 3 mm thick plastic laminated hylam sheet top cover with brass screws , cup wahser and cutting of grooves for switchs,sockets and regulator etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed. Note: Switch, sockets, regulators to be measured and paid separately

All as per the description of srl item No 62 above but 03/04 modules complete.

All as per the description of srl item No 62 above but 01/02 modules complete.

M&L for servicing, descaling with descaling agents(chemical solvents) for removing all silt/rust of the solar water heater 500 LPD capacity solar water heating system and making good any leakages, replacement of gaskets etc testing complete and making the plant functional including replacement of minor spares parts for complete system (rubber gaskets 63 mm dia, flange dummy 63 mm dia,flange brass dia 63 mm dia,hose clamps suitable sizesflange pieces, descaling agent, glass rubber beedings and if any minor spares reqd etc.,) complete all as specified and directed. Note: Rates deemed to be included in minor spares as above mentioned complete.

M&L for hose pipe (EPDM) size 25mm inner dia and 36mm outer dia suitable for solar hot water system incl taking down unsv complete all as specified and directed.

M&L for toughened glass 2000mm x 1000mm suitable thickness as exist size ISI marked suitable for solar hot water system incl taking down unsv complete all as specified and directed.

M&L for solar plate collector flat type of capacity 100 ltrs, ISI marked incl cover plate, collector box, absorber, suitable insulation incl taking down unsv complete all as specified and directed.

M&L for cylindrical type hot water tank of capacity 500 ltrs made of stainless steel sheet 1mm thick including insulation with PUF 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thsick sheet incl taking down unsv complete all as specified and directed.

M&L for taking down hot water tank 500 ltrs capacity and replacement of PUF insulation 50mm thick of 40 kg/cum density covered with SS 304 stainless steel cladding with 1mm thick sheet and refixing the same complete all as specified and directed.

M&L for temparature gauge ISI marked dial type haveing range 0 to 100 ºC incl taking down unsv complete all as specified and directed.

M&L for water make up tank of 15 ltrs capacity made of 1.6mm thick mild steel sheet, painting 2 coats of synthetic enamel paint surface & inner surface shall be painted with 02 coat of black bituminous paint incl taking down unsv complete all as specified and directed.

M&L for PVC ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, ISI marked,15mm bore complete assembly screwed for iron pipe and fixed and taking out unserviceable complete all specified and directed.

M&L for lagging to hot water pipes all round with nitryl rubber insulation 9mm thick with 26 SWG aluminium cladding system only for open surface 15/20mm bore pipe work portion upto eight storeys height high rise bldgs and conforming to IS 9842 complete incl taking down unsv complete all as specified and directed.

M&L for MS angle iron, flats, plates, clamps including nuts, bolts, washers, welding, bending, drilling holes for bolts in any shape or size as indicated or directed of making staging of the hot water tank and applying two coats of aluminium paint over a coat of red oxide zinc chrome primer including preparation of steel surface including taking down old unserviceable one complete all as specified and directed.

Supply and laying galvanised steel water tubing medium grade 15mm bore ISI marked screwed socketed joints complete with all tube fitting (such as bends, elbow, tees, short pieces, connectors, caps, plugs and unions,etc) and fixing complete with clips, wall hookswooden plugs, etc.,also cutting, screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting complete all as specified and directed. Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work).

S&F gunmetal gate valve 15mm dia screwed down high pressure with iron wheel head, screwed both ends for iron pipe including taking out unserviceable valve complete all as specified and directed.

Supply and laying galvanised steel water tubing medium grade 50mm bore ISI marked screwed socketed joints complete with all tube fitting (such as bends, elbow, tees, short pieces, connectors, caps, plugs and unions, etc) and fixing complete with clips, wall hooks wooden plugs, etc.,also cutting, screwing and waste and for making forged bends on piping as required at site including taking down the existing pipe line with fitting complete all as specified and directed. Note:- laying of pipe line on wall/floors/terrace of high raise buildings up to the 8th floor by using with suitable clamps, jointing material and necessary accessories and T&P complete necessary arrangement like scaffolding to carry out the work.

S&F gunmetal gate valve 50mm dia screwed down high pressure with iron wheel head, screwed both ends for iron pipe including taking out unserviceable valve complete all as specified and directed.

M&L for cutting of existing GI Pipe line up to 50mm dia for taking branch connection by necessary cutting/threading including suitable fittings such as union, elbows, tea etc for bypass of solar water line work complete all as directed at site.

S&F in repairs for copper tubing 12.5mm to 15mm dia for solar hot water system including taking down unserviceable complete all as specified and directed

S&F in repairs for copper tubing 20mm dia for solar hot water system including taking down unserviceable complete all as specified and directed

M/s S.G. BUILDERS

M P TYAGI ENGINEERS AND CONTRACTORS

M/s Prakash Enterprises

NEETU TRADERS (INDIA)

Shiv Enterprises