Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.7 LAccepted-AOC 10 370 NEAR GEETA MANDIR GAS GODAM ROAD OBRA OBRA SONBHADRA UTTAR PRADESH 231219 INDIA | SONBHADRA | UTTAR PRADESH | 231219 | 1 | Accepted-AOC lowest | |
| 2 | 2₹16.4 L+₹74,988 (4.79%)Rejected-AOC | 2 | Rejected-AOC Second lowest | |
| 3 | 3₹17.4 L+₹1.7 L (10.8%)Rejected-AOC | 3 | Rejected-AOC Third lowest | |
| 4 | Not Admitted-PreQual/Technical | - | Not Admitted-PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-PreQual/Technical | - | Not Admitted-PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
21 Oct 2020, 11:00 amClosed
Sr Xen Civil Mtc P and M Division Patiala
Flat no 29 Shakti Vihar near 23 no phatak patiala
Repair of 2 no E type Quarters at 220 kv sUB STATION Mohali under P and M division Mohali
2020_POWER_54569_1
179/2020-21
Open Tender
Civil Works
Item Rate
60 days
Patiala
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹40,000
Yes
25 Oct 2020
12 Oct 2020
21 Oct 2020
12 Oct 2020
21 Oct 2020
12 Oct 2020
Amount
CSR and NS ITEMS
Earth work in excavation in ordinary soil undressed with a combined lead of 15 metre including braeking of clods. CSR ref 6.2(b)
Earth work in excavation in fdns,trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge.CSR ref 6.6
Centring and shuttering for sides and suffits of beams.CSR ref 9.6
Centring and shuttering for flat surfaces such as suspended floors,roofs,landings,chhajjas,shelves etc.CSR ref 9.8
Centring and shuttering for stair case with sloping with soffit including risers etc.CSR ref 9.9
Centring and shuttering for parapet,facias and other similar items including edges.CSR ref 9.10
CC 1:6:12 with 40mm gauge stone aggregate CSR ref 10.8 b ii
PCC 1:5:10 CSR 10.9(b) ii
RCC M-20 mechanically mixed using batch type mixer as per IS1791 & vibrated by needle vibrtor but excluding the cost of reinforcement,centring and shuttering in super structure. CSR 10.20
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. CSR 11.3 i
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth CSR 11.5
First class burnt brick work laid in cement sand mortar 1:5 in super structure above plinth. CSR 11.6
75 mm thick brick work in CM 1:4 in parapet CSR 11.39
Terracing consisting of tiles 22.86x11.43x3.83mm over 25 mm mud plaster 7.5 cms mud filling on 25 mm mud plaster including 2 coats of bitumen laid @ 1.65 Kg per Sqm on top of CC slab and grouting with CM 1:4 and top face to be left clean after wire brushing. CSR 13.13 i
P/f 110 mm UPVC rain water pipe 2.5 Kg/Sqm pressure including jointing during masonary complete CSR 13.74
P/f 110 mm UPVC bend for rain water pipe CSR 13.75
Top Khurra of 0.6x0.6 mt for rain water pipe in 25 mm thick CC 1:2:4 over 50 mm thick CC 1:8:16. CSR 13.45
Bottom khurra on ground of size 1.2x0.6 mt consisting of brick on edge laid in cement mortor 1:3 over 7.5 cms CC 1:8:16 in/c 12.5 mm CP 1:3. CSR 13.51
CC gola 1:2:4 of 10x10 cms concave quadrent along junction of roof and parapet. CSR 13.55
Water proofing treatment for roof salb CSR 13.91
Floating coat of 1.5 mm thick neat cement laid in one operation to the topping CSR 14.4
40 mm thick conglomerate floor 1:2:4 on CC 1:8:16 100 mm thick on 100mm thick sand or stone filling CSR 14.9
20 mm grey polished skirting complete as per CSR 14.41
P/f non skid tiles of 300x300mm CSR 14.72
P/f ceremic tiles on wall of 200x300 mm CSR 14.125
P//laying 60 mm thick factory made cement concreteinterlocking paver block of M-35 grade machine on 40 mm copacted bed of coarse sand,filling of joints with fine sand complete in all respect.CSR 14.137
12.5 mm thick cement plaster 1:5 CSR 15.10
20 mm thick cement plaster 1:5 CSR 15.21
10 mm thick ceiling plaster 1:3 CSR 15.43
Striking joints in lime or Brick work CSR 15.65
White washing 3 coats CSR 16.3
Applying dry distemper on walls CSR 16.7
Peparation surface for applying pink primer on new wood or steel work CSR 16.15
Applying pink primer on new wood or steel work CSR 16.16
Paiting 2 coats of enemel paint on new wood work CSR 16.17
Paiting 2 coats of enemel paint on new steel work CSR 16.21
Red meranti super door shutters with 12 mm thick phenol bonded BWP plywood complete fixed in position 35 mm thick CSR 17.10 (xi) ii
Bansam Champ wood window shutter in/c hinges,cleats,stops cord etc complete fixed in position for 35 mm thick CSR 17.10(xxiii)(a)(ii)
Wire gauge Red Merananti super door shutter without spring housed in chowkhat 35 mm thick CSR 17.11 (Viii)A
Red meranti super cup board shutters with plywood pannels or faced on both side fixed in position exclding cost of handles,bolts etc but including the labour for fixing them.CSR 17.12(vii)(a)
Red meranti super wood cup board chowkhat includinh iron hold fast,iron hinges coners,straps,wooden knobs or handles fixed in position of size 45x60 mm. CSR 17.16 (Vii)
Cost of aluminium fittings csr 17.23 ii
P/F glass panes with nails& putty or wooden strips complete in all respact 4 mm thick CSR 17.26 (b) ii
Wrought iro or Mild steel ladders,framed gills,grating,etc. with end bars complete as per CSR 18.4
Supplying pressed steel frame chowkhats consisting of 1.25 mm steel sheet of size 118x60 mm with 40 mm single rebate weihing 3.43 kg/mt.CSR 18.24(A)
Supplying pressed steelframe chowkhats consisting of 1.25 mm steel sheet of size 151x60 mm with 40 mmdouble rebate weihing 3.95 kg/mt.CSR 18.24 ©
Labour rrate forCold twisted defomed bars for RCC works where not included in complete rates. CSR 18.18
Cleaning and grubbing road land including upooying rank vegitation, grass, bushes, shrubbs, sampling and trees with girth upto 300 mm dia complete CSR 24.2 (A)
Public health work
Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket, short bend 32 mm dia including cost of solid white cover complete in all respect and to the entire satisfaction of engineer in CSR 30.4
Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.
Size 550 mm x 400 mm CSR 30.32 ii
Providing and fixing in position best quality stainless steel sinks with complete fitting.
Size 600 mm x 450 mm x 225 mm CSR 30.47 b
Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick Cardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plugs embedded in the walls or chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in- Charge) complete including cutting and making good the walls etc.CSR 30.62 a
Providing & fixing in position PVC water storage tanks triple layer make as approves by Engineer-in-Charge including hosting and carriage from store to site of work complete with providing and fixing 15mm or 20mm internal Diametre tanki nipple complete.(Excluding cost of platform).CSR 30.97(A) ii
p&f in poistion automatic brass ball cock in tanks 20 mm dia csr 30.96 B ii
P&f in poistion gully trap CSR 30.99 A
P and f SWR upvc soil waste as per IS 13592 of EDC manufacture complete but excluding cost of joint (i) 110 o/d single socket pipe laid CSR 30.74 iii B (b)
(ii) 75 mm dia CSR 30.74 iii B (d)
Poviding PVC solvent cement joint to SWR pipe and specials including cost of solvent 110 mm CSR 30.77 C (b)
75 mm CSR 30.77 C (d)
P nad f of SWR upvc special for soil waste pipe as per IS coupler CSR 30.81 (iii) B (viii)
110 mm dia CSR 30.81 (iii) B (ix)
75 mm dia CSR 30.81 (iii) D (vii)
P trap/floor trap 75 mm CSR 30.81 (iii) D (viii)
Cutting chase in brick wall in cement or in floor for embeding pipes 75X75MM CSR 30.85 A
150 x 150 CSR 30.85 B
Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge). CSR 30.65 A iii
Providing & Fixing in postion 15 mm i/d stop cock of best quality (as approved by the Engineer-in-charge).CSR 30.66 C
p and f PVC flexible tube connection csr 30.72(A)
Extra payble for every 0.3 mt additional depth of manhole chamber CSR 29.59 (A)
Earth work in excavation manually CSR 29.1 (A) i
P&L in trenches and jointing of HDPE pipes having ISI specification complete as per CSR 110 mm dia pipe csr 29.44 (A)
Construction of inspection chamber of size 450x450 with RCC cover light duty CSR 28.60 A
P & f UPVC pipe with GI specials as per ISI 4985 20 mm dia CSR 28.11 A(a)
25 mm dia CSR 28.11 A(b)
electrical work
RECESSED CONDUIT PIPE WIRING SYSTEM WITH Paino SWITCHES: Fan Box andElectronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-
Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).CSR34.05(i)a
Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. CSR34.05 ii
Wiring call-bell point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).CSR34.05 iii
Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade.CSR34.05 v
Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch. CSR34.05 vi
PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated single core FRLS copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.
PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq.mm, 1100volts grade CSR 34.09 ii
PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade CSR 34.09 iii
PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade CSR 34.09 iv
P and f PVC conduit pipe heavy duty complete as per CSR 25 mm dia CSR 34.12(X)
Flexible pipe CSR 34.12 (xxv)a
P and f GI earthing CSR 34.12 (xiv) a
Supply and erection of MCB for circuit protection complete as per CSR single core 6 to 32 AMP CSR 34.16 A(iii)
MCB double core CSR 34.16 A(Vii)
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's: CSR 34.17 ii
Supply and fiing general purpose tube fitting of crompton make on wall 1x36w NS
Providing and fixing ceiling fan with regulator complete in all respect 1400 mm sweep NS
Providing and fixing exhaust fan 12" dia NS
Extra carriage
Extra carriage for Cement AOR
Extra carriage for Fine sand AOR
Extra carriage for Coarse aggregates AOR
Extra carriage for Coarse sand AOR
Difference of Quarry rates
Crushed Bajri 12/13.2mm AOR
Crushed Bajri 11.2mm AOR
Course Sand AOR
Stone Metal 40mm AOR
Bricks Mohali distt AOR
Notes: -
For all the above items ref. to CSR or NS items is given in short and complete nomenclature of CSR as well as NS items originally approved by CE/ TS, PSTCL, Patiala will be applicable along with general specifications.
For any NS item, which is not covered in the DNIT, shall be allowed on the same pattern of AOR with the prior approval of Er-in Charge.
GST will be applicable as per Govt. norms.
CHANDAN ENTERPRISES
Mahesh Kohli Goverment Contractor
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .