SPECIAL REPAIRS TO BUILDING NO A-12 (OR BATHROOM)

Amount

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing rubbish outside MD land all as specified & as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing rubbish outside MD land all as specified & as directed.

Dismantling PVC water tanks and removing from site, capacity exc. 500 ltrs and not exc. 1000 ltrs complete all as specified & as directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

Taking down 15 mm bore steel tubing and connections including removal to store/ site and making good disturbed portion as required complete all as specified and directed.

Taking down 20 mm bore steel tubing and connections including removal to store/ site and making good disturbed portion as required complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removing rubbish outside MD land complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads removing rubbish outside MD land complete all as specified and directed.

M&L for rendering 15 mm thick on any faces of brick work in CM1:4, finished even and fair including using water proofing compound @ 2% bu weight of cement complete all as specified and directed.

M&L for rendering 10 mm thick on fair face ceiling in CM1:4, finished even and fair complete all as specified and directed.

M&L non - skid ceramic tiles 5 to 7 mm thick (400x400), coloured, digital type, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including provision of screed bed in CM 1:6, 15 mm thick complete all as specified and directed.

M&L for coloured glazed ceramic tiles (designer Pattern) in vertical surface 450 x 300 x 5 to 6 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L 25 mm thick, cement concrete type B-0 , 1:2:4 (12.5 mm graded stone aggregate) in sub-base complete all as specified and directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement and sand mortar1:6 complete all as specified and directed.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement and sand mortar1:6 complete but expect bricks all as specified and directed.

M&L half thick brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement and sand mortar1:4 complete all as specified and directed.

M&L for 3 mm thick sheet figured glass and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete all as specified and directed

S&F PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet etc. complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28x30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm prelam PVC sheet on back face as per specification and drawing complete all as specified and directed.

S&F butt hinges 100 mm size, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 125mm long alluminium handles, cast type, anodized complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, double layered with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (Capacity in litres 1000) complete all as specified and directed.

Supply and fixing 15 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings, roofs or laid in floors complete all as specified and directed.

Supply and fixing 20 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings, roofs or laid in floors complete all as specified and directed.

M&L in repair vitreous china urinal, bowl type, flat back, size 465 x 355 x 265 mm, white with grating and union for discharge pipe excluding flush pipe, waste pipe etc complete all as specified and directed.

S & F in repairs vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot restsexcluding flush pipe complete all as specified and directed.

S&F in repairs vitreous China wash hand basin white flat back size 580x450mm including brackets, coupling etc complete all as specified and directed.

S & F in repairs PVC connections 15 mm dia with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

M&L PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

M&L PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) bends any radius (110mm Bore) complete all as specified and directed.

S & F PVC (SWR) bends any radius (75mm Bore) complete all as specified and directed.

M&L PVC (SWR) junction double, (double T), equal or unequal 110 mm bore complete all as specified and directed.

M&L PVC (SWR) junction double, (double T), equal or unequal 75 mm bore complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair bib taps 15 mm dia, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop cock 15 mm, fancy type, angle cock, (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe complete all as specified and directed.

S&F in repair chromium plated soap tray of approved pattern & size complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L in RCC 1:1.5:3, nominal mix, type B1 (using 20 mm graded stone aggregate) as in beam and lintel supported on wall etc. complete all as specified and directed.

M&L for use & waste of form work to sides of beam and similar work etc rough finished surface of concrete complete all ass pecified & directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild teel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT bars 5 to 10mm dia, cut to length, bent to shape required, including cranking, as in stirrups, hooking ends and binding with and including mild teel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified & as directed.

M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces in CM1:6, finished even and fair complete all as specified and directed.

M&L for preparation of new plastered of wall surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered of wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F 10 ltr capacity, PVC valveless, top level, syphonic action type, flushing cistern, white colour, with inlet, ball valve, float and handle including bracket, 32 mm dia flush pipe etc complete all as specified & as directed.

Tulsi Enterprises

M/s D AND R CONSTRUCTION AND SUPPIERS