REPAIR/ REPLACEMENT OF COMPOUND WALL, SECURITY FENCING AND CHAIN LINK FENCING IN AGE B/R I OF GE (N) AHMEDNAGAR

Amount

Dismantling of posts struts (wood, steel or RCC) any section taking out embedded portion and making good disturbed ground etc. complete all as specified and directed by Engineer in Charge.

Dismantling fencing wire mesh any type and any description etc. complete all as specified and directed by Engineer in Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified and directed by Engineer in Charge.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and cast etc. complete all as specified and directed by Engineer in Charge.The demolished material shall be removed away fro the premises.

Supply and fix mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc. complete all as specified and directed by Engineer in Charge.

M&L for Prestressed precast RCC compound wall of height 1800 mm including excavation of post holes of size 450 x 450 X600 mm for foundation, PCC M 15 Nominal mix in foundation etc. complete all as specified and directed by Engineer in Charge. Column: 150 mm x 150 mm Vertical H section Column with 7 bars of 3 mm HT Steel with M-25 concrete. Precast slabs( incl top design slab) : 2100 x 300 x 50 mm plank with 4 bars of 3 mm HT steel with M-25 concrete. Foundation: 450 x 450 x 600 mm with PCC M 15 Nominal mix

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparation of new surface and two coats of Cement base paint over a coat of primer etc. complete all as specified and directed by Engineer-in-Charge

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft and loose soil returning, filling in and ramming earth or broken rubble mixed with earth around, removing surplus material n.exc 50 mtr and making good disturbed surface etc. complete all as specified and directed by Engineer-in-Charge

M&L for plain cement concrete in PCC 1:4:8 type D2 using 40 mm graded aggregates in foundation filling and mass concrete or similar work etc. complete all as specified and directed by Engineer-in-Charge

Supply and fix hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessar drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long etc., complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc. complete all as specified and directed by Engineer-in-Charge

Supply only chain link fencing made cut from GI wire 10 gauge and 50 mm aperture weight as per sample etc. complete all as specified and directed by Engineer-in-Charge

Supply and fix 10 mm dia mild steel round bars to tighten chain link fencing including necessary hooking binding cutting etc. complete all as specified and directed by Engineer-in-Charge

M&L for two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc. complete all as specified and directed by Engineer-in-Charge

M&L for two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description n exc 10 cm width or girth when connected with other painting or when painted in a different tint including preparation of surfaces etc. complete all as specified by engineer in charge.

An amount of Rs 84,300.00 shall be deducted from BOQ on account of schedule of credit

M/S. M. F. Sharif & Co. (BID ID -3111685)

Galaxy Construction (BID ID -3111225)

Ms. M.D. Auty (BID ID -3111290)

M/S VISHWAJEET SHANKARRAO KULKARNI (BID ID -3110325)

M/s. R. R. ASSOCIATES (BID ID -3103797)

AZAD SERVICES (BID ID -3111594)

M/s A G Gund (BID ID -3111494)

MS. G.A. CONSTRUCTION (BID ID -3110983)

Mane Creations And Construction (BID ID -3110550)

M/S-B.R.SONAWANE (BID ID -3109317)