Loading…
Loading…
Tender Value
₹1.9 L
EMD Value
₹3,821
Closing Date
10 Jul 2026, 5:30 pm3d left
Assistant Engineer
Assistant Engineer
Installation of various traffic safety measures from ch16.00 km to Ch25.50 km on BuxaForest Road and ch0.00 km to Ch5.00 km on Sinchulla Hill Road under Alipurduar Division P.W.D in the district of Alipurduar
2026_WBPWD_5016179_1
02 of 2026-27 OF THE ASSISTANT ENGINEER, PWD, ALIPURDUAR SUB-DIVISION.
Open Tender
CIVIL WORKS
14 days
Alipurduar sub division
plesae refer tender documents
3 documents required · 3 mandatory
₹3,821
Yes
2 Jul 2026
2 Jul 2026
13 Jul 2026
2 Jul 2026
10 Jul 2026
2 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per Clause 803 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). | - | Sqm | 584 | - |
| 2 | Supplying & fixing of Raised Pavement Markers / Road Studs / Cats Eye made of polycarbonate moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face which shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to clause no 804 of MoRT&H's specification for Road &Bridge Works (Fifth Rev.). Marker height shall not be less than 10 mm and shall not exceed 20 mm, width shall not exceed 130mm and with minimum reflective area of 13 sq.cm. on each side and slope to the base shall be 35 ± 5 degree. Fixing will be without nails but by using epoxy resin based adhesive as per manufacturer's recommendation including site clearance etc. and complete as directed by the Engineer in Charge .The contractor will have to provide a test certificate from a reputable national/international laboratory conforming the above specifications. | 170 | Each | 255 | ₹43,350 |
| 3 | Retro-Reflectorised Traffic Signs
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).
ii) 60 cm equilateral triangle | 34 | Each | 2,652 | ₹90,168 |
| 4 | Add GST @18.00 % | - | Units | 1 | - |
| 5 | Add Labour welfare Cess @1.00 % | - | Units | 1 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.78 MB
2911sl1.pdf
Tender Documents • 1.06 MB
BOQ_5085432.xls
BOQ • 0.32 MB
NIeT1_merged.pdf
PDF • 3.45 MB
Download all tender documents and submit your bid