PROVISION OF EXTERNAL SERVICES FOR NFS AT AIR FORCE STATION UTARLAI

Amount

NOTE: Schedule ‘A’ Part I to IX are under Ser No. 1.00 to 9.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out for SCHEDULE 'A' PART-I (BUILDINGS/STRUCTURES)

Lump sum price worked out for SCHEDULE 'A' PART-II (PART-II (ITEMS/WORKS FOR CONSTRUCTION OF SHED OF SIZE 3.5MX6M)

Lump sum price worked out for SCHEDULE 'A' PART-III (ITEMS/WORKS FOR CONSTRUCTION OF STEPS TO EXISTING BUILDING)

Lump sum price worked out for SCHEDULE 'A' PART-IV (INTERNAL ELECTRIFICATION WORKS)

Lump sum price worked out for SCHEDULE 'A' PART-V (INTERNAL WATER SUPPLY WORKS)

Lump sum price worked out for SCHEDULE 'A' PART-VI (ROAD AND PATH WORKS)

Lump sum price worked out for SCHEDULE 'A' PART-VII (SEWAGE DISPOSAL WORKS)

Lump sum price worked out for SCHEDULE 'A' PART-VIII (EXTERNAL WATER SUPPLY WORKS)

Lump sum price worked out for SCHEDULE 'A' PART-IX (EXTERNAL ELECTRIC SUPPLY WORKS)

SCHEDULE 'A' PART - X (MISC ITEMS) (Note for items 10 to 23: The bidders shall quote their rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES)

S&F LED bulb of capacity 15 W complete all as specified and directed.

S&F LED tube light fitting 1x20W, 230V, including LED cylindrical polycarbonate tube rod (4 feet) with in built driver with metal heat sink, double sided connection including 4 feet box type batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. Note: The above item will consists of two items i.e (i) LED glass tube rod 20W (ii) Box type batten

S&F LED tube light fitting 1x8W, 230V, including LED cylindrical polycarbonate tube rod (2 feet) with in built driver with metal heat sink, double sided connection including 2 feet box type batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. Note : The above item will consists of two items i.e (i) LED glass tube rod 8W (ii) Box type batten

S&F MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA(type 'B') complete all as specified and directed.

S&F MCB SPN, 240 Volts, 32 Amps breaking capacity 10 KA (type B curve) complete all as specified and directed.

S&F 15mm angle valves, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply, install, test and commission Open Well Submersible monoblock set pump stainless body 1HP single phase 230V, voltage range +6, -15%, 50Hz, suction and delivery 25mm dia, head 12m with strainer and complete including starter, control panel as per OEM and in and including water level sensor with all accessories to switch off the motor when water level reduces in sump and fixing arrangement all as specified and directed.

Supply, lay, test PVC insulated, submersible flat cable with stranded copper conductor of size 1.5 sq mm ,3 core, 1100 Volts grade complete all as specified and directed.

Construction of Valve Pit of size 1000x1000x1000mm (internal dimensions) complete all as shown on Drawing no. CEAA/TD/57 Sheet No. 1/1(1.1), excavation and earth work in any type of soil and strata, moorum filling, 100mm thick lean concrete PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate below foundation, and 380mm thick Stone masonry wall built in cement mortar (1:4), 15mm thick internal and external plaster in cement mortar (1:4) upto15cm below ground level mixted with water proofing compound, 3.15mm thick MS sheet cover with angle iron frame of size 40x40x6mm to be fitted in and around 50x50x6mm mild steel angle iron frame with 50X6mm flat iron hold fasts embedded in PCC Coping (1:2:4) type B-1 of 150mm depth and width equal to thickness of wall including locking arrangement with necessary fixing materials like hinges, nuts and bolts etc (valve chamber cover shall be opened in two halves) and painting to MS cover with one coat of red oxide primer and two coats of synthetic enamel paint and two coats of cement base paint over a coat of primer etc all as specified and all as shown on drawings.

Supply, install, test and commission Isolation Transformer of Capacity-100KVA, three phase 50 Hz, copper wound oil cooled, class of insulation A, metallic body duly powder coated designed forinput voltage 415+-5% and output voltage 415+-5% Ratio 1:1, Vectorgroup with 1st filing of Transformer oil of requisite dielectric strength to level, efficiency more than 95% separate neutral bushing shall be brought out forearthing potential difference bet ween neutral to earth less than one volt with all standard fittings like digital temperature meter, adequate number of cooling radiators, lifting hooks one set, Earthing terminal two nos complete with over load / short circuit protection complete all as specified and directed.

S&F cable cable route indicator with embossed letters as "MES HT CABLES" made out 6mm thick 200mm diameter cast iron plate welded on mild steel angle iron 40x40x5mm 90cm long and 15cm cross tee welded at bottom duly painted with two coats of aluminim paint over a coat of red oxide primer with and including embedded in cement cncrete block (1:2:4) type B-1 of size 30x30x20cm in ground complete all as specified and directed.

M&L for Boring of holes under road, pavement, hardstanding and necessary machine including HDPE pipe of 150 mm dia suitable for0.4 mpa working pressure complete all as specified and directed.

M&L for sand cushioning of under ground cable provided with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. Note:- 18cm punned thickness shall be consideredfor measurement and payment.

M&L for 40 to 50mm thick stone patti rough dressed jodhpur stone slab cover laid in trenches for protection of cable 25 to 30 cm wide and not less then 50cm in length laid dry abutting each other with gap between adjacent slab not excedding 10 mm over sand cushoing complete all as specified and directed.

National Rewinding Works

M/s godara infratech and power industries