Bifurcation of 11KV overloaded feeders and replacement of damaged LT lines by ABC on turn key basis in Mathura/Vrindavan.

Amount

Supply & Erection of following material for replacement of old and damaged conductor/ABC with LT AB Cable as per RESPO Drawings. Work includes all cartage/carriage, T&P, commissioning and any other work which is required for completion of work.

9 Mtr ST Pole (SP 33), bottom portion galvanised as per RESPO norms.

8.5 mtr PCC Pole

LT Pin Clamp for PCC

LT Shackle Insulator

Suspension clamps with I Hook

Dead end Clamps with I Hook

Piercing Clamps

Danger Board

GI Barbed Wire

Stone Pad

MS nut Bolt and washers

Concreting of PCC/ST Pole with all material as per respo norms.

LT ABC 3x120 sqmm

XLPE insulators weasal conductor with lugs for jumpering

Pole Earthing Complete (as per RESPO Norms)

Stay Set complete with clamps

LT Distribution Box 3 Phase

LT Distribution mounting clamps

Loop Insulator

Tail less unit complete with structure

Dismantling of existing LT line conductor/AB Cable, associated line material and shifting to nearest store as per site requirement with proper weighment and stacking at store.

Supply & Erection of following Material against feeder bifurcation work, for making of underground HT line on 11 KV XLPE Cable.

ST Pole 11 mtr long (SP 55), bottom portion galvanised as per RESPO norms.

Disk insulator with fitting

11 KV MS angle (65x65x6mm), 2700 mm long bracing Set with 04 nos. clamps

MS Dropper channel (100x50x6mm), 2028 mm long.

Top Channel (125x65x6mm), 2240 mm long.

11 KV Pin insulator with pin

MS Holding clamp with nut bolts

danger board

MS bolts, nuts and washers

ST Pole Earthing Complete (as per RESPO Norms)

stone pad

Concreting of PCC/STP Pole with all material as per respo norms.

stay complete with clamp

Digging of Trench having 1.2 mtr depth from ground for laying of 11 KV XLPE Cable of size 3x185 sqmm in double circuit by excavation of earth, laying of bricks to cover the Cable, filling of Sand, earth ramming and dressing properly with complete job including cost of Bricks, sand, clamps etc in double circuit.

HDPE Pipe, PN-6 (160 mm Diameter) with clamp etc.

11 KV XLPE cable of size 3x185 sqmm.

Laying of 11 KV XLPE cable of size 3x185 sqmm on double pole/panel/open space.

Laying, Testing and commissioning of 11 KV 3x185sqmm XLPE cable in Double circuit in trench. Work includes making of loops and other works required for completion of job.

Laying, Testing and Commissioning of 11KV 3x185 sqmm XLPE Cable for double circuit line in HDPE Pipe (upto 160 mm dia) by digging of trench having depth 1.2 mtr by excavation of earth, laying of HDPE pipe, filling of sand, ramming and dressing properly after laying with complete job.

Laying, Testing and Commissioning of 11KV 3x185 sqmm XLPE Cable in HDPE pipe by HDD Method (2.5 mtr deep under the ground) and dressing properly on crossing the road/Track.

Cable jointing kit outdoor (Erection work of Cable jointing Kit Outdoor/for VCB includes filling, making all connections etc., required for completion of work.)

GI pipe 6"

Clamp for GI pipe

Aluminium Lug 150 sqmm

11 KV VCB outgoing CTR 200/100/5A 350 mva (Erection work of VCB includes all accessories and T & P etc., required for completion of work).

Bus bar arrangement for VCB

Dog conductor for jumpering

XLPE insulated weasal conductor for jumpering

Supply and Erection work of 11 KV overhead line as per RESPO Drawings. Work includes all cartage/carriage, T&P, commissioning and any other work which is required for completion of work.

11 Meter ST Pole SP-55, bottom portion galvanised as per RESPO norms.

V type cross arm 100x50x6 mm M.S.Channel (7.9 Kg/M)

Clamps for above with bolts and nuts

F Bracket for 33 KV

33 KV Pin Insulators

33 KV pin with nuts

11 KV Disc Insulator with Fitting

M.S. Tee Channel

stone pad (300x300x75 mm)

stay complete with clamp and concreting

11 KV Guarding

M.S. Guarding Angle (Extra for Guarding)

Danger Board with clamps for 33 KV

G.I. Barbed wire

Bolts, nuts & washers all sizes (if Required)

Alluminium binding wire 6 SWG

Complete Earthing of pole by MS Earthing Rod of 20x2500mm and 6 SWG earthing wire etc.

concreting of supports (0.268cu.m/Pole)

Laying sagging stringing, binding, jumpering & fixing of ACSR Dog with all accessories etc of following conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carriage etc required for proper completion of work.

Supply and Erection work of 11 KV overhead Section Pole as per RESPO Drawings. Work includes all cartage/carriage, T&P, commissioning and any other work which is required for completion of work.

ST Pole 11 mtr long (SP 55), bottom portion galvanised as per RESPO norms.

stone pad (300x300x75 mm)

M.S. Dropper Channel (100x50x2028mm)

11 KV M.S. Angle 65x65x6x2700mm. Bracing set with 4 No. Clamp

Clamps with Bolt and Nut

G.I. Barbed wire

Danger Board with clamps

Concreting of ST Pole

Earthing of pole by MS Earthing Rod of 20x2500mm and 6 SWG earthing wire etc.

ACSR XLPE Weasel Conductor (Ins.) for jumpering

11 KV Disc Insulators B&S type

11 KV Disc Fittings

11 KV Pin insulator

11 KV Pin

P.G. Clamp

stay complete with clamp

concreting of stay

MS. Bolts, Nuts & Washers

Road Restoration of Pakka Road including all material, T&P and labour etc.

SJ TRANSFORMERS

CAPITAL ELECTECH PVT LTD

AMIT ENGINEERING CORPORATION

MODERN TRANSFORMERS PVT. LTD