SPECIAL REPAIRS TO CERTAIN AIRMEN MARRIED ACCN AT AF STN YELAHANKA

Amount

Taking down chowkats with shutter without taking off shutter from the frame not exc 1.5 Sqm each.

Taking down chowkat with shutter without taking off shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each .

Taking down shutters of any description area n exc 1 sqm.

Taking down shutters of any description area exc 1 sqm n exc 2 sqm.

Taking down cement plaster on brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete.

Demolition of cement concrete in ground floor and paving not exc 15 cm thick below or above ground level .

Demolition of cement concrete in ground floor and paving exc 15 cm thick below or above ground level.

Demolition of brick work built in cement mortar all as directed.

Demolition of reinforced cement concrete in ground floor and pavings in any description and in any position.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.

Roughening surfaces of old concrete floor bypicking.sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.00Kg of cement per sqm.

Taking up or down steel tubing 20 mm bore and connections including cleaning for re-fixing or removal to store .

Taking up or down steel tubing 25 mm bore and connections including cleaning for re-fixing or removal to store

Factory made solid panel PVC door shutter30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm widthstuck inside with solvent cement for stilesand plain colour PVC sheets for top rail,lock rail & bottom rail on either side & asgap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be'fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet'beading, and joined together with solvent'cement, suppling & fixing in the frame atsite as per specification & drawing.

Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Squaretube, suppling & fixing in opening as per specification & drawing.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed .

S&F Factory made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commerical type on both sides.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung typ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

M&L for frame work such as grills, grating etc with ends of bars shouldered and/or reveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters walkways, railings, fameworks etc conferming to Fe 290 Gde E-165

S& F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .

S & F in repairs stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .

S&F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.

S&F in repairs 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.

M&L preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over pink primer all as specified.

M&L preparing old wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying one coats of synthetic enamel paint all as specified.

Preparing of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamelled paint over a coat of Red oxide primer zinc crane.

Preparing of Old steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coats of synthetic enamelled paint.

S&F Mild steel flat as in hold fast , wall ties plain angle clean for securing purline to wood trusses conforming to Fe 290 Gde E-165.

S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed.

S&F 200mm length mild steel barrel tower bolt, stove enamelled black, with bright bolt and fixed.

S&F 150mm length Aluminium anodised, barrel tower bolts of extruded section and fixed.

S&f 100MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F Butt hinge, medium weight, cold rolled mild steel of 100 mm size.

S&F Aluminium handles 150 mm , cast type, anodised.

S&F 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.

S&F Continuous(piano) hinges,mild steel,bright finish of electrogalvanised 30 mm width of flap.

M&L as in repair Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.

S&F Cover fillets of standard 4.5 mm thick ness hard board, 40mm wide,and fixing with screws.

S&F Hasp and staple ,aluminium anodised 100 mm size ,wire type,stove enamelled .

S&F Rim latches 100 size with two levers, of brass body stove enamelled finish polished bright .

M&L 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sunken portion .

M&L 10 mm thick cement plaster in CM (1:3) using WPC @ 3% by wt of cement in sunken portion.

M&L PCC 1:5:10 type E-2 (using 40 mm graded trap stone aggregate) as in sunken portion.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in mass concrete.

M&L Non skid coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry over cement screed 15 mm thick 1:6.

M&L for glazed ceramic coloured tiles (light shade) of size 350x250x7mm/450x350x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in CM (1:4) on vertical surfaces as backing coat complete all as specified and as directed.

M/L 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement).

M&L for rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) NOTE:WPC will be measured and paid separately.

Supply only Liquid water proofing compound.

M/L 10 mm thick cement plaster in CM 1:3 in ceiling surfaces finished even and smooth (without using extra cement)

S&F in repair Soap Dish Holder, in repairs, all as spd and directed by Engr-in-Charge. Make : Jaguar Code No ACN-1131N or equivalent.

S&F Corner Glass shelf with bracket, all as spd and directed by Engr-in-Charge. Make : Jaguar Code No CAN-1173 or equivalent.

S&F in CPVC pipes 20 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

S&F in CPVC pipes 25 mm SDR 11 & Plain VPVC SDR 11 on walls, ceiling orf laying including fitting in floors all as specified and as directed by Engr in Charge.

Supply and fix in repairs stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed 15mm bore dia . MAKE : SEICO/ESSESS/CERA

S& F in repair Gun metal Gate valve 25 mm dia with iron wheel head,screwed both ends for iron pipe and fixed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repair Vitreous china wash basin white flat back size 550X400mm excluding taps, waste , including cutting for and pinning in ends of brackets or erecting stand brackets.

S&F Waste coupling of PTMT ( half or full threaded) of 40 mm dia.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratorywith plugs, washer and wastes including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and conecting union to pipe over all size 915 mm x 460mm bowl size 410 mm x 330 mmx160 mm.

S&F as in repairs Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr . Make :NIRALI,Blue star,Nilkhant or equivalent.

S&F as in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipes.

S&F in repair 70 mm long fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe with 235 mm long shower arm complete all as specified & directed by Engr-in-Charge. Make:Cera Model F- 7020106 or equivalent.

S& F in repair PVC connections 15mm size with PTMT nuts of length 600mm.

S&F as in repairs 15mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair High density polyethylene pipes 40 mm bore of pressure ratings 6 kgf/cm2 fixed complete to walls etc.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia.

S&F in repair PVC Pipes 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors.

S&F in repair PVC Pipes 110 mm bore single socketed ,in any length with rubber ring joints,laid in walls.

S&F in repair PVC(SWR) branch piece single 110 mm (Single Y) equal equal or unequal.

S&F in repair PVC (SWR) junction single 110 mm (single T) equal or unequal.

S&F in repair PVC (SWR) bends any radius 110 mm .

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints,fix in walls.

S&F in repair PVC (SWR) bends any radius. 75 mm dia.

M&L for Brickk work with subclass 'B' bks, straight or curved on plan exc 6m mean radius built in CM 1:6

M&L for Brickk work with subclass 'B' bks, straight or curved on plan to any radius in half brick thick built in CM 1:6

M&L for RCC Slabs 1:2:4 type B1 using 20 mm graded aggregate suspended on walls beams and columns in floors,roofs,landings balconies,canopies deck slabs and in shelves and the like complete all as spcified and as directed.

M&L for Form work to soffits of suspended slab such as roof slabs,floors slab landings and similar work n exc 200 mm thick.

M&L for TMT bars 6 mm to 8 mm dia cut to length bent to shape required ,including cranking ,bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire not less than 0.9 mm dia.

S&F as in repairs tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges.

M&L Granite( of any size) work in cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20 mm thickness.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket.

S&F in repairs PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms).

M&L for 75 mm thick cement concrete 1:2:4 type B-2 using 40 mm graded aggregate for plinth protection .

Cutting holes in stone walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

M &L for PCC 1:3: 6 type C1 using 20 mm graded single as in bed plates .

M&L for prepration of new plastred surfaces of wall applying two coat of oil emulsion distemper over a coat of alkali resistant cement primer over 2 mm thick wall care putty complete all as specified and directed. .

M&L for complete removal of exisitng treatment of old decorated surfaces of wall applying two coat of oil emulsion distemper over a coat of alkali resistant cement primer over 2 mm thick wall care putty complete all as specified and directed.

M&L for Preparation of the new surfaces of walls plastered and applying two cots of cement base paint complete all as specified and as directed.

M&L for preparation of the old surfaces unplastred of wall complete removal of existing treatment applying two coat of cement base paint complete all as specified and as directed.

M&L for one coat of white wash on old surfaces including preparation of surfaces for ceiling surfaces..

S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as directed and specified by Engr in charge.

S&F in repairs decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete.

Aditya Associates

Sri Lakshmi Venkateswara Enterprises

S R Trading Co

LAKSHMI CONSTRUCTIONS