Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹58.4 LAccepted-AOC 74 T N H B COLONY NEAR BALAMURUGAN TEMPLE MADURAI 625017 | MADURAI | TAMIL NADU | 625017 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹60.9 L+₹86,855.08 (1.45%)Rejected-AOC NO S 2 PERIYAR NAGAR HOUSING UNIT RAJAGOPALAPURAM PUDUKKOTTAI 622 003 | PUDUKKOTTAI | PUDUKKOTTAI | TAMIL NADU | 622003 | L2 | Rejected-AOC highest bidder | |
| 3 | Rejected-Technical 402 3RD FLOOR DEV PALACE M G ROAD KARUR 639 001 | KARUR | TAMIL NADU | 639001 | - | Rejected-Technical DID NOT FULFILL THE TENDER CONDITION |
Tender Value
₹58.5 L
EMD Value
₹40,000
Closing Date
22 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SUPERINTENDING ENGINEER
Office of the Superintending Engineer PWD Building C and M Circle Erode
Providing Strong Room, Counting Hall and Barricading arrangements in Government College of Engineering in Erode Centre for 17-Erode Parliamentary Constituency Election 2024 at Erode District
2024_PWD_444733_1
31 2023 24 B C M CIRCLE ERODE 01 03 2024
Open Tender
Civil Works
Lump-sum
60 days
Erode
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹40,000
Yes
23 Jul 2024
8 Mar 2024
22 Mar 2024
8 Mar 2024
22 Mar 2024
8 Mar 2024
Amount
Hire charges for providing barricading using jockey as vertical post and casurina prop of size 8cm to 10cm as horizontal ties including labour charges for removing the same after counting is over without damages to the building as directed by the departmental officers.
Hire charges for providing out side barricading arrangements using with casurina props 8cm to 10 cm and 60cm below ground level to 1.80m above ground level and fixing 3 ties 5 to 8 cm dia casurina props barricade and remove the same after the function is over and as directed by the departmental officers.
Rent charges for providing GI Sheets covered barricading arrangements with casurina posts of size 13cm to 15 cm dia for vertical and 5cm to 8cm dia casurina poles for horizontal ties in 3 rows . The Barricading should be 1.80 m above ground level and 0.60m below ground level . The horizontal casurina ties should be tied with vertical post using coirroppes the centre to centre to distance between the vertical casurina posts in 3.00 m to 3.30 m Barricading is covered with Gi corrugated sheets of thick 0.40mm using nails of the both ends . Sloped supports bracing with around should be done whreever required for stability against galewinds . The rate including dismantling ,conveyance charges etc., complete as directed by the departmental officers.
Hire charges for Providing weldmesh using 7.5 X 2.5cm 10 gauge with silver scantling of varies length and size for vertival and horizontal supports and cross supports using C.W reepers of size 2"x1" including cost of materials and labour charges for fixing in postion with all necessary accessories etc., complete complying with standard specification as directed by the departmental officers.
Removing and Refixing the Existing AluminiumPartition With Door Including Cost of Labour Charges, Drilling Holes in the RCC Column,Slab,Masonry Wall Wherever necessary With Power Drill To the Required Extent and Make Good to the Original condition after fixing and also direct etc., Complete.
Painting two coat over new iron works such as steel doors, windows, ventilators, window bar, balustrades, etc., with best approved first quality synthetic enamel paint of approved colour over the exisitng red oxide priming coat in all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specifications.(Paint should be got approved by the Executive Engineer before use on work).
Erecting the New Plywood (6mm thick) Single side over silver oak frames and iron brackets with necessary accessories such as clamps with screws, nails, brackets etc., complete complying with standard specifications and as directed by the departmental officers.
Hire charges for providing enclosure G.I sheet including cost of nail, bolt and washers, conveyence and removing the same after the counting is over complete complying with standard specification.
Dismantling Clearing away BRICK WORK IN CEMENT MORTAR of any thickness and Carefully stacking the materials for reuse etc, Complete complying with standrad specification and as diected by the Departmental Officers.
Brick work in Cement Mortar 1:5 using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
a) For Superstructure in Ground Floor
b) For Superstructure in First Floor
Fabricating, supplying and fixing of steel Emergency exitdoor cum, emergency window with the following specification. M.S. angle in size 40x40x6mm are used for the outer frames and M.S. angle of sie 35x35x5mm for the shutter frame, stiffners with 32x6mm M.S. flats provided at required intervals in the shutter frames 18 guage CR sheet is laid as panel and welded instant for 1/3 bottom portion of the shutter, M.S. flat 18x5mm is welded over the 32x6mm M.S flat sandwitching the CR sheet in between additional stiffner with 18x5mm M.S. flat is provided diagonally at the rear-side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 15kg/m2 and the top portion of operation emergency window is to be made of 25x25x3mm M.S. angle welded intact with CR sheet and 25x3mm M.S. flat at diagonally at the near side of the window at required interwals 6 Nos. of hinges to be provided,6 Nos of holdfast 100mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 2 Nos. one at top and the other at the bottom are to be provided one aldrop is provided at an appropriate place in the door 2 Nos. of 'D' type handle for emergency window and 2 Nos of handle for door is to be provided at appropriate places. A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of materials, labour transportation to side of works, loading, unloading and all other incidental charges etc., complete.
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
a) Double leaf door
Hire charges for providing weldmesh Door arrangements by using weldmesh of size 2.50 cm x2.50 cm and outer and inner frame 20x20mm square tube including cost of nails , screws and clamps and removing the same after the counting is over including conveyance and stacking as directed by the departmental officers.
Plastering with cement mortar 1:5 (Two cement Five sand) 12mm thickness in all floors, Complete complying with standrad specification and as diected by the Departmental Officers
White washing one coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.
White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
Providing granolithic floor finish of the 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of nAUtomobilessary planking for panelling wherever nAUtomobilessary and as directed by the departmental officers)
Hire charges for providing direction flex board made of alround 2" x 1" CW reepers and fixing bthe flexy board and fixed in ground using Casurina poles of required size and height and as directed , the rate includes fixing dismantling and conveyance etc,complete.
Hire charges for Providing direction sign board made of 5mm foam board with reflective stickers of size 3' x1' .the boards are fixed over 6mm thick plywood sheets and fixed in ground using Casurina poles of required size and height and as directed , the rate includes fixing dismantling and conveyance etc,complete.
Clearing the Heavy Jungle using JCB Machinery etc., complete with standard specifications. (Hire charges only)
Sri Sivaram and co
GL INFRA
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_529752.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .