Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹45.8 L+₹13,868.50 (0.30%)Rejected-Finance 503 LAJPAT NAGAR ALWAR RAJ 301001 | ALWAR | RAJASTHAN | 301001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹46.2 L+₹46,477 (1.02%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹48.7 L+₹3.0 L (6.67%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
Refer Docs
EMD Value
₹98,000
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
COMPREHENSIVE MAINT IN MD ACCN (MAP) AND PERIODICAL SERVICES IN MD ACCN UNDER AGE B/R-II AT ITARANA ALWAR
2022_MES_531158_1
8075/E8
Open Tender
Civil Works
Item Rate
210 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹98,000
Yes
8 Aug 2022
15 Jun 2022
21 Jul 2022
15 Jun 2022
19 Jul 2022
29 Jun 2022
15 Jun 2022 - 28 Jun 2022
Amount
Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed by Engr-in-Charge and as specified. Note : (i) Contractor should arrange scaffolding and other tools/plants for taking down of plaster in G+2 Bldgs. (ii) No extra payment will be made for taking down of plaster height more than 3 mtr.
M&L 15mm thick cement plaster in CM 1:4 on external surface in two layer first layer of 10 mm th in CM 1:6 and 2nd layer 5 mm thick in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even in any height complete all as specified & directed. Note : (i) This item is operated in G+2 (upto 12 Mtr height) in MAP Blocks only (ii) Contarctor should arrange all the scaffolding and necessary tools and plants for plastering works in his own arrangments. (iii) No extra paiment will be made for addn height i.e. above 3 mtr.
Supply only liquid water profing compound as per IS-2645.
Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by EIC. (iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.(WPC will be measured and paid seperately). (iv) M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces. (v) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. (vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick. (WPC will be measured and paid separately.) on top. (vii) M&L for plastering in CM 1:4, 15 mm thick with water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair.(WPC will be measured and paid seperately). Note :- Above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measered.
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed
M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
M&L for Glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick over 10mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.
M&L for Glazed ceramic tiles (coloured) in vertical surface 300x450x7 mm thick over 10 mm rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 but each complete all as specified & directed.
Taking down of shutter exc 1 sqm and n exc 2 sqm each complete all as specified & directed.
Supply and fixing factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed.
Supply and fixing flush shutter of 30mm thick solid core construction with block board core and plywood face panels with both faces covered with decorative face veneer with lipping/frame and laminated on both sides with self closing circular knob for locking arrangement magic eye and safety chain complete all as specified & as directed.
Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
M&L for pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer, complete,
S&F solid PVC door frames of size 50mmx47m made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match wth printed sheet reinforced with MS Square tube supplying & fixing in opening as per specification and drawing.
S&F factory Made Solid PVC Moulded Door Shutter, With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing in SSR.
S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long.
S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked.
S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long.
S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified and directed.
S&F MS barel tower bolt 200mm long stove enamelled black with bright bolt & fixed.
S&F MS pressed bow handle of 150m size oval type stove enamelled black all as specified.
Supply and fixing 300 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified.
Supply & fixing in repairs vitreous china squatting pan (Orissa pattern) water closet (white) size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified.
Supply and fixing as in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.
All as per item No 25.00 above but fixing in repair only.
S&F in repair 15mm dia stop valve/angle valve of copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union.
All as per item No 27.00 above but fixing only in repair/reuse.
S&F in repair swivel shower rose (fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed
S&F 15mm dia concealed stop valve/angle valve of copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed in repair.
Fixing only in repair WHB flat back of size 580mm x 450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete.
S&F 32 mm dia PVC flexible waste pipe for WHB/sink 600 mm long with PVC coupling all as directed fixed in repair..
S&F in replacement grating doom 125 mm dia with waste hole of PTMT (Min wt 40 gms) all as specified and directed
S&F in replacement 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.
All as per item No 34.00 above but fixing only in repair/resuse
S&F in repairs PVC connection 600 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.
Dismantling of water tanks of capacity exc 250 but n exc 500 ltrs & removing to stores complete all as specified & directed.
S&F in repairs 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.
All as per item No 38.00 above but fixing only in repair/resuse
S&F in repair ball valve brass high pressure with polythene float and fly nut screwed on iron pipe ad fixed 20 mm bore of pipe
S&F in repair gun metal globe gate valve 15mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as as specified and directed.
M&L in repair galvanised steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
M&L in repair galvanised steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.
Taking up cast iron 75/100mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead.
M&L for 75mm bore sand cast iron soil, waste and vent pipe, any length with or without ears, with cement joints fixed to walls or in floors.
M&L for 100 mm bore sand cast iron soil, waste and vent pipe, any length with or without ears, with cement joints fixed to walls or in floors.
S&F in repair CI floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed
S&F in repair cast iron 'P' or 'S' trap 100mm dia out let waste pipe with cement jointing complete all as specified and directed.
S&F CI bends any radius 75mm bore.
S&F CI bends any radius 100mm bore.
S&F in repairs 75mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repairs 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F UPVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings
S&F UPVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings
S&F UPVC (SWR) bend 75mm bore of any radius
S&F UPVC (SWR) bend 110 mm bore of any radius
S&F in repair 110 mm stack clamp out of 50mmx 5 mm flat iron and 16 mm dia round iron stays incl bolts and nuts and securing ends of stays to walls or roof etc, complete all as specified and directed.
M&L for taking down and removal of loose / disintegrated old concrete / plaster and applying 3mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind New Cement plaster/ polymer Modified plaster/ concrete/ screed concrete with old surface etc complete.
M&L applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 added to 50 KG Cement with 13 litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and alike complete.
M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete. Note : Qty of Zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.
M&L rendering 20mm thick in polymer cement mortar 1:3 prepared with latex SBR by the wt of cement concrete surfce incl. finishing the surface even and smooth without using extra cement. Make Liquid of M/S choksey/STP /Sika/Pidilite as approved by GE. Note :-exact qty and application process of chemical is strictly as per manufature's guidelines.
M&L for waterproofing treatment by water proofing liquid after proper cleaning of the new surface free of dust and applying the first coat (by Brush only)@ 4-4.5 Sqmt/Lit , allowing it to dry for 24 hrs and applying the second coat over it on horizonal and vertical surface all as specified and directed. Note : Application shall be carried out through authorised applicator of manufacturer only and as per guidelines of Manufacturer strictly. Each stage shall be passed by Engr-in-charge/GE before laying further coat. Make: Sunshield 100 of M/s Choksey or FOSROC / STP / PIDILITE / SIKA as approved by GE.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified
Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials as directed by Engr-in-Charge and all as specified.
M&L factory made 60mm thick vibratory moulded precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
M&L for 75mm thick PCC (1:4:8) type D-2 (Using 40mm stone aggregate) as in foundation concrete all as specified and directed.
M&L PCC 50mm 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth wihout using extra cement laying in alternate panel complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mean radius, built in CM 1:6.
M&L 50mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement complete all as specified and as directed
S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.
M&L for repair of disturbed / broken brick holes in wall with cement mortar 1:6 including filling of narrow interstices with PCC 1:2:4 type B0 (using 12.5mm aggregate) after and including removal /root out of trees, plants, trunks, grasses and creeps etc from roof or wall, finished with 15 mm plastering in cement mortar 1:6 complete all as specified and directed.
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty 2 mm thick complete.over a coat of primer .
M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling.
M&L for preparation of old surfaces of ceiling and applying two coats of white wash on ceiling.
M&L preparation of new plastered surface of wall including cornices, pilasters etc and applying two coat of weather proof (Appex) paint of approved shade/tint all as specified & as directed.
M&L for grinding/polishing of existing terrazo/kota in florring and skirting/dado using suitable size of grinder stone butty as per requirement including fillup of joints/disturbed portion with filling material of floor etc complete all as specified and directed in the following stages:- (a) First Stage : Washing cleaning, joints filling (where required) by using grey/white/cement and grinding the floor by using suitable butty to achieve smooth, spotless surfaces. (b) Final Stage : Again cleaning, washing and grinding the floor by using suitable butty and polishing with bee wax polish to receive smooth floor etc as entire satisfaction of Engineer-in-Charge.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 3mm thick sheet glass figured and glazing with oil putty in square n exc 0.5 sqm in each pane.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed.
M&L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in-Charge.
M&L for preparation of newly wooden surfaces/old untreated of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified and directed.
M&L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.
Supply only Cement base paint . Make : Berger/Asian paint/Nerolac
Supply only Oil bound distemper . Make : Berger/Asian paint/Nerolac
Supply only Synthetic enamel paint for painting on wooden surface. Make : Berger/Asian paint /Nerolac
Supply only synthetic enamel paint for painting on steel surface. Make : Berger/Asian/Nerolac Note for item No 85.00 to 87.00 : (i) Contractor will procure and deposite all the materials mentioned as supply only itmes to AGE B/R-II for which a separate store will be allotted. (ii) Contractor can issued required materials weekly basis during the currency of work through receipt/issue voucher so that accountability/record of supply only items could be maintained. (iii) The items should be supplied within 30 days from date of commencement of work and periodical work will only start when complete supply of material carried out. (v) If the supply is not completed timly, Contractor will be liable for compensation as per IAFW-2249. (vi) Application of cement base paint/ OBD/synthetic enamel is calculated as per Manufacturer instructions.
M&L rendering 15 mm thick in CM 1:4 on stone masonry surfaces or on other than fair faces of brick masonry incl water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L rendering 10 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L rendering 5 mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved patern using wooden batten all as specified and directed by Engineer-in Charge
M&L for old decorated surface of wall incl brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed by Engr- in - Charge.
All as per description of serial item No. 93.00 here-in-above but one coat on ceiling surfaces.
All as per item No 93.00 here -in-above but two coat of white wash on walls.
Labour only for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed by Engr- in - Charge.
Labour only for complete removing washing, rubbing down and stopping of old decorated distempered and painted surfaces of walls, plastered or unplastered including cornices, plasters etc and applying two coats of oil bound distemper of approved shade/tint complete all as specified and as directed by Engr- in - Charge.
Labour only for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.
Labour only for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.
Labour only for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed by Engr- in - Charge.
Labour only for preparation of old treated surfaces of walls, plastered or unplastered and applying two coats of cement base paint of approved shade/tint. complete all as specified and as directed by Engr- in - Charge.
M&L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint. complete all as specified and as directed by Engineer-in-Charge.
Labour only for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
M&L preparation of new plastered surfaces & providing two coats of distemper oil emulsion over a coat of primer paint on walls
ALAKNANDA ENTERPRISES
J.J.ENGINEERING
GAR CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .