Furnishing of the NCC and Sports Room in the Admin First Floor at IIITDM Kancheepuram

Amount

Providing and fixing of aluminium partition work using 66mm x 38mm x2mm aluminium section, 6mm thickness plain glass on top (0.9m) and 12mm thickness pre laminated board (both side laminated) on bottom side (1.2m) in all partitions using necessary all the hardware items, and 1 No of 1.0m width openable door with required hardware items etc complete all as per the direction of Engineer in Charge. (The rate including doors, hinges, lock, handle, door closer, all the channels and required hardware items etc. complete) Make: Glass: Saint Gobain Make Pre laminated particle board : Centuary/ Greenply

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved

texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. Make : Armstrong/ Saint Gobain Gyproc

Providing and fixing of Showcase Rack of length 5.30 m and height being taken as 2.40m on one side of the wall. The bottom of the showcase rack to be made with 19mm thick commercial plywood of size 1.20 x 0.60 m both inside and outside shutters and approved Laminate. The remaining portion to be made with 0.60 x 0.60 x 0.60 m 10mm thick toughened glass shutters for keeping the Medals. The rate also includes necessary hardware accessories both for the plywood and glass portion. The work to be executed as per the layout and the directions of the Engineer-in-charge. Make: Glass: Saint Gobain Make plywood: Merino/ Greenply. Note : The Measurements of the Cupboard will be taken in face of the cupboard outer to outer

Removal and refixing of existing electrical installations ie light (10 Nos), fan (8 Nos), fire alarms etc. complete all as per the direction of Engineer in Charge. (The rate including necessary hardware items etc. complete)

Providing and fixing of central AC system duct mouth (6 Nos) and grill units (6 Nos) complete all as per the direction of Engineer in Charge. (The rate including necessary hardware items etc. complete)

MEGAM

SM ENTERPRISES