SPECIAL REPAIR TO BLDG No P 672 OFFRS MESS OF ARMY AD CENTRE AT GMS UNDER GE I GOS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

S&F dark shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No. 05 above but on vertical surface of wall as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exc .11 sqm but not exc .18 sqm in floors etc.Set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 mm x 7 mm/450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles including 10mm thick rendering in CM 1 :4 complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) and removing to store complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) and removing to store complete all as specified and directed.

Providing and fixing factory made uPVC white colour casement ( Openable) Door made of extruded profiles with wall thickness of 2.3 mm (+-0.2 mm) window profile with hollow section with multi chamber . Frame (60 mm × 58 mm) sash (60 mm × 78 mm). T- Profile (one vertical length in two shutters)(60mm x 74mm) Glazing bead (35 mm × 20 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2 mm thick galvanized steel Frame (28 mm × 21.5 mm) sash (31mmx27mm) T- Profile(27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm × 100 mm long fasteners. HARDWARE: (Casement door handle made of zinc alloyed (white coloured coated),corner striker,secondary striker,cylinder,Door transmission gear made of mild steel with multi point locking system with strikes,3D Hinges of Zinc alloyed(white coated powder). ] (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

S&F factory made UPVC white colour Slinding Window three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm), Window profile with hollow section with multi chamber, frame (88mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (42x57mm), sliding interlock (one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) will be mitered, cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories. Note : The unit rate includes cost of glass and all other connected accessories).

S&F door closer hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed etc complete all as specified and directed.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified and directed.

S&F Bands, straps, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good all disturbed surfaces complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and covered both the faces with decorative face vineer with lipping/frame to match complete all as specified and directed.

S&F 100mm size butt hinges extruded aluminium alloy with alloy with galvanised mild steel hinge pin, complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F brass 4 lever Mortice lock ,vertical type of size 100mm complete all as specified and directed.

Dismantling wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets, complete all as specified and directed.

S&F 12mm thick Seamless calcium silicate ceiling made out of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to ceiling section with 25 mm long self drilling and tapping screws to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two equal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour printed PVC Sheet inclusive of solvent cement and fixing at site on PVC Frame complete all as specified and directed.

Taking down cement or cement lime plaster from brick walls etc, including racking out joints, hacking, for key, scrubbing down with water etc. complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement as in patches n.exc 3 sqm complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick work or concrete surfaces in two layers with 10mm thick in CM 1:6 and top 5mm thick in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L washing,rubbing down and stopping of distempered and painted surfaces on wall complete and applying alkali resistant priming paint complete all as specified and directed.

M&L for applying 2mm thick wall care Putty in two layers on wall surfaces absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of Plastic Emultion Paint to walls complete all as specified and directed.

M&L washing,rubbing down and stopping of distempered and painted surfaces on ceiling complete and applying alkali resistant priming paint complete all as specified and directed.

M&L for applying 2mm thick wall care Putty in two layers on ceiling surfaces absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of Plastic Emultion Paint on ceiling complete all as specified and directed.

M&L for preparation of new/old plastered surfaces of walls and applying two coats of weather proof exterior emultion(Apex of asian paint or equivalent) complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F in repair Cascad Vitreous china wash down water closet (EWC) inc all accessories such as flushing cistern,P-S type,pvc connection complete all as specified and directed. Make- Jaquar cat No. KUS-WHT-35953 or equivalent of higher cost

M&L for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

S&F in repair table top basin cascad oval counter top WHB coloured 170 x 460 x 460mm complete all as specified and directed. Make Jaquar Cat No. JDS-WHT-25935 or equivalent of higher cost

M & L brick work with fly ash bricks, Straight or curved on plan exc 6m mean radius,built in 1:6 in cement mortar complete all as specified and directed.

M&L Brick work with subclass 'B' bricks straight or curved on plan to any radius half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for Granite slab (of any size) 20mm thick machine cut, bedded and jointed and pointed with white cement with admixture of pigments to match the shade of granite including cutting,. Mirror polishing and edge rounded all as per specified for counter top WHB, shelves and Cooking platform and stair case etc.complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length bend to shape required incl cranking bending and binding with mild steel wire (annealed) not less than 0.9 mm dia. complete all as specified and directed.

M&L Precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregates in cover slabs set in cement mortar 1:6 including all necessary form work complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately).

S&F in repair CP central hole basin mixture without popup waste system with 450mm braded hoses. complete all as specified and directed. Make JAQUAR CAT No. CQT 23169B or equivalent of higher cost

S&F in repair CP Angular stop cock 15mm bore screwed down,high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair CP 2 way bib cock. Make JAQUAR CAT No. ARI 39041 or equivalent of higher cost

S&F in repair health faucet with fluxi pipe and hand shover ,the length of hose 1.50mt fitted to the tap.complete all as specified and directed. Make JAQUAR or equivalent all specified and directed.

S&F glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed.

S&F in repair SS toilet paper holder with flap complete all as specified and directed. Make JAQUAR CAT No. AHS 1551 or equivalent of higher cost

S&F in repair Soap dish holder Make JAQUAR CAT No. CAN-1131 N or equivalent of higher cost complete all as specified and directed.

S&F in repair Towel rail 20mm dia, brass chromium plated fixed complete all as specified and directed.

S&F in repair looking mirror of any size rectagular fancy type having bevelled boarders of glass fixed to walls with stud pins complete all as specified and directed.

M&L for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed.

M&L for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed.

S & F 75 mm PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and directed.

Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed.

S & F 1000 litres capacity, rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

S&F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore of pipe complete all as specified and directed.

S & F 15mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per Item No. 74 above but 20mm bore

Demolition of cement concrete unreinforced n exc 15cm thick above ground level complete all as specified and directed.

Taking down existing water proofing membrance and cleaning roof, plastered surface etc preparing the surface to receive plaster by brushing with wire brush and fanning the surface to remove all loose dirt etc and brushing neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed.

M&L for 15 mm thick rendering on surface as in roof with integral water proofing compound 3% by the weight of cement in cement mortar 1:4 complete all as specified & directed. (Integral WPC will be measured and paid separately).

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed.

M&L for water proofing treatment to roof surface complete all as specified & directed with the followings :- (a) Apply bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (c) Applying bituminous based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane

Supply only integral water proofing compound complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN Dbs/TPN DBs/ Main switch including old unserviceable MCCBs/ MCBs isolators etc and making good to disturbed surface complete all as specified and directed.

Taking down care fully copper/ aluminium sub main wiring of any size from surface / concealed / esisrting conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLSH multi stranded copper conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including GI sunk boxes of size 1.2 mm thick and 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switch/ socket of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. for following:- (a) One light point controlled by one , one way switch 5 Amp

(b) One fan point/ exhaust fan point controflled by one, one way switch 5 Amps and regulator

(d) One 3 pin 5 Amps Switch socket outlet point controlled by one switch on the same board

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

All as per tiem No. 85 above but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardent PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

All as per tiem No. 85 above but using 4.0 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Supply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F for Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F for Modular Socket outlet 2 in 1, 6 pin 6 Amp 2 module ISI marked, complete all as specified and directed.

S&F for modular Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch complete all as specified and directed.

S&F for modular Fan step regulator, 120W - 2 module, 230 volts complete all as specified and directed.

S&F for modular Switch socket outlet 3 pin 5 amp' flush type 220 volts complete all as specified and directed.

S&F for Sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar Scapacity SPN 8 way AC 240 Volts with IP-43 protection, complete all as specified and directed.

S&F for Ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less'than 1.5 meters below normal ground level, connected to galvanised iron earth lead wire of 4 mm dia GI pipe mediam grade 15 mm dia upto 7.5 mtr including provn of conrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3 mm with lugs 02 Nos and with 6.0 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for earth plate, common sald and charcoal filing, test point made out of Bronze/ Gun metal with fixing arrangement, funnel, wire mess and excavation/ earthwork in hard/ dense soil, to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2009 Part I and connecting to earth test point all as specified or indicated incl testing on completion.

Supply and fix exhaust fan made of study Engineering plastic complete voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 260 mm suitable for ceiling fitting including the exhaust pipe of suitable size complete all as specified and directed.. Make Usha Crisp Air Premia or equivalent of higher cost

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers heavy duty complete all as specified and directed.

M&L Submain wiring with two single core 10 Sqmm size stranded copper conductor PVC insulated unsheathed cable FRLS in and incl PVC rigid non metalic conduit concealed/ surface type and one PVC cable of 6.0 Sqmm size solid copper conductor PVC insulated andunsheathed for continous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity 40 to 63 Amp SPN 240 Volts and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L for laying of concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows for one telephone socket point alongwith for RJ-11 telephone socket with transparent shutter 1 module alongwith fulsh metal box 1 module and front cover plate 1 module complete all as specified and directed.

M&L for laying of concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows for one TV socket point alongwith TV socket 1 module alongwith fulsh metal box 1 module and front cover plate 1 module complete all as specified and directed. Make: Legrand cat No 5727 73 for outlet, cat no 575700 for modular box and cat no 6890 07 for modular cover plate or equivalent of higher cost

S&F in replacement of decorative mirror light fitting of capacity 12 W 220 volts , 50 Hz complete all as specified and directed. Make: Philips Cat Part No 919216000000 or equivalent of higher cost

S&F in replacement of ceiling recess light fitting of capacity 3 watt round in shape suitable for installation in concealed box with polycarbonate body (warm white colour) 220 volts , 50 Hz complete all as specified and directed. Make: Havells or equivalent of higher cost

S&F in repair of decorative wall lamp up & down of capacity 6 watt 220 volts, 50 Hz complete (warm white colour) complete all as specified and directed. Make: Smartway or equivalent of higher cost

S&F in repair of modular AC box with 25 Amp mcb SP 240 Volts , 50 Hz complete all as specified and directed. Make Havells DBOXx or equivalent of higher cost

S&F in repair of decorative surface mounted LED downlighter round shaped with capacity of 21W with white powder coated aluminium housing with integrated electronic driver complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S&F in repair for modular metal flush box 6 module complete all as specified and directed.

S&F in repair for modular metal flush box 8 module box (H) with 6 clamps complete all as specified and directed.

S&F in repair for modular metal flush box 12 module box complete all as specified and directed.

S&F in repair for modular metal flush box 4 module complete all as specified and directed.

SF in repair combined modular plates 4 module complete all as specified and directed. Make: Havells coral glossy white

SF in repair combined modular plates 6 module complete all as specified and directed. Make: Havells coral glossy white

SF in repair combined modular plates 8 module complete all as specified and directed. Make: Havells coral glossy white

SF in repair combined modular plates 12 module complete all as specified and directed. Make: Havells coral glossy white

V.Venkata Ramaiah

R J ENTERPRISES

Likitha Enterprises

M/S S.K GHOSE

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

ABC CONSTRUCTION COMPANY