Construction of Chief Ministers Mini Stadium at Killiyoor Assembly Constituency under Sports Development Authority of Tamil Nadu and Member of Legislative Assembly 2025-26 in Kanniyakumari District

1-Admin Block - Civil Work @ (Site I in Kalinkarajapuram)

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete and as directed by the department officers

Supplying and filling in foundation, basement, etc with filling M.sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification.

Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Supplying and filling of gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

In Foundation & Basement Level.

In Ground Floor

In First Floor

In Head Room

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Providing and laying in position ready mixed or site batched design mix cement concrete for M25 grade cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge.

In Foundation & Basement Level.

In Ground Floor

In First Floor

In Terrace Floor

Brick work in Cement Mortar 1:5 ( One cement, Five sand) using country bricks for foundation and basement including curing, etc., complete complying with standard specifiction.

In Foundation & Basement Level.

In Ground Floor

In First Floor

In Head Room

Brick partition walls of 10.80cm thickness using best quality country bricks in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)

In Ground Floor

In First Floor

In Terrace Floor

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:4 (One Cement and Three P.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wallsurface ect., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing 40mm thick granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing walls with following best approved quality, Designed colour ceramic tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. (Dadooing walls Plain Galzed tiles of size 150x150x6mm)

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and laying in position ready mixed or site batched design mix cement concrete for M25 grade cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc.,complete complying with standard specification and as directed by the departmental offi

itemH1Code42

itemH1Code43

itemH1Code44

itemH1Code46

itemH1Code47

itemH1Code48

itemH1Code49

itemH1Code50

itemH1Code51

itemH1Code52

itemH1Code53

itemH1Code54

The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work-M-0675

2-Admin Block - Plumping Work @ (Site I in Kalinkarajapuram)

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC /12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition,etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position best quality and approved make Indian made colour glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position 15mm dia following taps (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the

Long body tap CP Down Tap

Concealed Stop Cock

Supplying and fixing in position 15mm dia two way bibcock (heavy duty) with Health faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) M-0515

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass CP towel rail 600mm long of approved make (Jaquar or Equivalent )with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing coat hook with twin arms heavy tube to rear of wooden shuttervof WC cubical,use of S.S screws etc,complete as directed by the dept officers. -LS

Supplying, fixing, testing and commissioning approved make Angle valve with necessary fittings.

Supplying and fixing in position UPVC specials / Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The UPVC specials should be got

itemH1Code70

50 mm dia

UPVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS

Supplying and fixing in position UPVC specials / Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The UPVC specials should be got

itemH1Code70

itemH1Code74

Supplying and fixing in position UPVC specials / Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The UPVC specials should be got

itemH1Code70

itemH1Code77

Supplying and fixing in position UPVC specials / Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The UPVC specials should be got

itemH1Code70

itemH1Code80

Dia 50mmx40mm

Supplying and fixing in position

itemH1Code84

50 mm dia

110 mm dia

Supplying and fixing in position

itemH1Code84

itemH1Code88

Supplying and fixing in position

itemH1Code84

itemH1Code91

itemH1Code93

itemH1Code94

itemH1Code95

itemH1Code96

itemH1Code97

itemH1Code98

itemH1Code99

itemH1Code100

itemH1Code101

itemH1Code102

itemH1Code103

itemH1Code104

itemH1Code105

itemH1Code106

itemH1Code107

itemH1Code108

itemH1Code109

itemH1Code110

itemH1Code111

itemH1Code112

itemH1Code113

itemH1Code114

itemH1Code115

itemH1Code116

itemH1Code117

itemH1Code118

itemH1Code119

Providing and laying in position ready mixed or site batched design mix cement concrete for M25 grade cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge.

Plain surfaces Roofslab,floorslab,beams,lintels,loft,sillslab,staircase waist,portico slab and other similar works.

itemH1Code122

itemH1Code123

itemH1Code124

itemH1Code125

itemH1Code126

itemH1Code127

itemH1Code128

itemH1Code129

itemH1Code130

itemH1Code131

d broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

5-Obstacles Course @ (Site I in Kalinkarajapuram)

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.

Brick work in Cement Mortar 1:5 ( One cement, Five sand) using best COUNTRY bricks for foundation and basement including curing, etc., complete complying with standard specifiction. In Foundation & Basement Level.

itemH1Code138

d broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

itemH1Code140

d broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

5-Obstacles Course @ (Site I in Kalinkarajapuram)

6-Turf Cricket @ (Site I in Kalinkarajapuram)

itemH1Code144

Providing and laying Water Bound Macadam Grading - II ( 75mm to 22.40mm) IRC HBG metal consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer. (Mix -in - place method) (From Road Data)

Providing and Laying good quality red earth filling, including cost & conveyance of red earth from approved sources to work site including labour for spreading, watering and compacting to achieve the required Proctor density at 100% compaction.

itemH1Code148

itemH1Code149

Supplying and Painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

5-Obstacles Course @ (Site I in Kalinkarajapuram)

itemH1Code151

itemH1Code152

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

In Foundation & Basement Level.

In Ground Floor

Providing and laying in position ready mixed or site batched design mix cement concrete for M25 grade cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge.

itemH1Code157

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Supplying, fabricating and placing in

itemH1Code126

Brick work in Cement Mortar 1:5 ( One cement, Five sand) using COUNTRY bricks for foundation and basement including curing, etc.,complete complying with standard specifiction. In Ground Floor

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

itemH1Code166

itemH1Code167

Supplying and Painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

itemH1Code151

itemH1Code152

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

itemH1Code157

itemH1Code118

itemH1Code172

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

itemH1Code176

itemH1Code126

itemH1Code178

Plastering with cm 1:5 mix ( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

itemH1Code181

5-Obstacles Course @ (Site I in Kalinkarajapuram)

Scrub jungle of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m. (All kinds of soil)

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

itemH1Code185

itemH1Code186

itemH1Code187

itemH1Code188

confirming to IS 13592 Class "B" with rubber ring joints confirming to IS 5382 for solvent jointing for Suspended piping in ceiling Lvl. The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. The quoted rate should include encasing the pipes in toilet sunken in M-15 grade concrete as per specifications 100mm thk. all around with necessary shuttering arrangement, as directed by Engineer-in-Charge.

160 mm dia

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works. M-0569

Supplying and Erection and construction of sewer chambers of required internal dimensions 600x600 upto 0.6 mtr.depth with 230mm brick masonry in C.M.1:5 thk of masonry over bed of 1:2:4 R.C.C. 200 mm thk bove 100 mm thk P.C.C.1;3:6 Cement concrete foundations over M.Sand bed of 100mm thk channelling in 1;2:4 cement concrete, plastering in 1:3 cement mortar for internal and external surface finished with floating coat of neat cement, the work including excavation for required depth of gully trap and refilling and making good in the surface with SFRC cover and frame 600x600mm (clear opening) complete complying with standard specifications etc.,

600 x 600 mm size internal and depth more than 600 mm

itemH1Code100

itemH1Code194

itemH1Code195

itemH1Code196

Dia 40mm

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Fixing Gun Metal Wheel Valve

Dia 40mm - M 0503

12- Septic Tank @ (Site I in Kalinkarajapuram)

Earthwork for foundations and depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth.

Supplying and filling in foundation and basement with m sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification.

Laying the Plain Cement concrete 1:4:8(One cement four sand and eight broken Machine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers. The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc..

Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid)

Providing and laying in position machine batched,machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement cement ratio with plasticiser using 20mm and down concrete structural elements under controlled water graded machine briken grnite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the depart- mental officers comple.-1m3

Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.

Plastering with Cement Mortar 1:4 (One Cement and Three M.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position C.I.Manhole covers (heavy duty) of various sizes of best approved quality and as per standard specificationsetc.,complete.0.6X0.6M Size etc., complete.

13- Medal Podium @ (Site I in Kalinkarajapuram)

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., c

itemH1Code212

Supplying, fabricating and placing in

itemH1Code138

itemH1Code214

itemH1Code215

itemH1Code216

itemH1Code218

Solar Street Light: Providing and fixing a 250W Solar LED Street Light with standard IP waterproof rating, motion sensor, and remote control. The solar light set includes a tubular arm and necessary fittings, integrated with a solar panel and battery. The installation includes a vertical GI pole with a height of 6 meters from road level, a suitable foundation, and necessary on/off switch control. All material approved from the client is necessary before commencing the work.

15- Eletrical Arrangements @ (Site I in Kalinkarajapuram)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End-SD 293

itemH1Code223

itemH1Code224

itemH1Code225

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) SD 151

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End SD 580

Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable rigid PVC conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour SD 75

itemH1Code230

Supply and laying of 4 x 10 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good SD 180

Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection SD 127

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 106

Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection SD 127

Supply & Fixing of Water Tight Bulk Head Fitting suitable for 15W LED Lamp with Guard Heavy Type SD 83

Supply and fixing of fancy glass shade and 7W / 9W LED bulb -SD 79

itemH1Code237

16- Sports Equipment & Kit @ (Site I in Kalinkarajapuram)

High Jump Post and Bed: Supplying of high jump posts made from GI or aluminum with an adjustable height range and markings, heavy- duty steel base with rubber padding, one fiberglass crossbar with protective caps, and a foam core high jump bed with a weather- resistant vinyl cover.

itemH1Code241

itemH1Code242

itemH1Code243

equired for a standard volleyball court.

Volley Ball: Supplying of an approved-brand volleyball, meeting official standards. Pricing includes all costs.

Volley Ball Referee Stand: Supply of a volleyball referee stand providing a pivotal elevated platform. Constructed from durable materials such as steel or aluminum, this stand guarantees stability and longevity. Installation procedures prioritize a secure attachment to the ground or court surface, ensuring a safe and dependable setup.

Foot Ball Post : supplying and Insatalation of football posts made from materials like GI or aluminum, The installation process involves anchoring the posts firmly to the ground to guarantee stability and safety, complete with all essential accessories and fittings.

Foot Ball Net : Supply of Football Net, complete with all essential accessories and fittings including the procurement of a single set, typically required for a standard Football court.

Foot Ball: Supplying of an approved-brand Football, meeting official standards. Pricing includes all costs.

Basket Ball Post: Supplying and Insatalation of 25mm thick acrylic board with basket, complete with all essential accessories and fittings.

Basket Net: Supply of Basket Net, complete with all essential accessories and fittings including the procurement of a single set, typically required for a standard Hockey court.

Basket Ball: Supplying of an approved-brand BasketBall, meeting official standards. Pricing includes all costs.

Short put 7.26 kg: Supplying of an approved brand short put, meeting official standards. Pricing includes all cost.

Short put 6 kg: Supplying of an approved brand short put, meeting official standards. Pricing includes all cost.

Short put 5 kg: Supplying of an approved brand short put, meeting official standards. Pricing includes all cost.

Short put 4 kg: Supplying of an approved brand short put, meeting official standards. Pricing includes all cost.

Short put 3 kg: Supplying of an approved brand short put, meeting official standards. Pricing includes all cost.

Javelin throw 800 g: Supplying of an approved brand Javelin throw 800 gm, meeting official standards. Pricing includes all cost.

itemH1Code259

itemH1Code260

itemH1Code261

itemH1Code262

Hurdles: Supplying of an approved brand Hurdles, meeting official standards. Pricing includes all cost.

Training Hurdies: Supplying of an approved brand Hurdles, meeting official standards. Pricing includes all cost.

Ladder: Supplying of MS/ Aluminium Ladder, meeting official standards. Pricing includes all cost.

Turf cricket net : Supply of turf cricket net Net, complete with all essential accessories and fittings including the procurement of a single set, typically required for a standard volleyball court.

1. For Concrete Surface: If it is a concrete surface, epoxy paint/ acrylic paint/ latex traffic paint/ thermoplastic markings/ concrete stain or dyes or suitable material should be used which should be capable of withstanding regular wear and tear. 2. For Synthetic Surface/Turf: Durable, weather-resistant material or marking material like filed marking paint for synthetic turf/ pre-formed markings/ acrylic paint for hard courts/ polyurethane paint for hard courts, or suitable materials for the specific surface type (grass, turf, asphalt, etc.) and capable of withstanding regular wear and tear. 3. For Earthen Surface: If it is an earthen surface, field marking paint/ chalk or lime powder/ biodegradable paints, or suitable material should be used which should be capable of withstanding regular wear and tear.

Football

Volleyball

Basketball

Open Kabaddi Area

Long Jump Pit

Kho kho Court

Field (Shotput, Javelin throw, High Jump, Discus Throw)

17- Bore well @ (Site I in Kalinkarajapuram)

Drilling of borewell in Hardrock area including labour charges for insertion of PVC casing pipe.

supply and delivery of following casing pipes and specilas

itemH1Code278

itemH1Code279

itemH1Code280

Kho kho Court

itemH1Code282

Supply and delivery of three phase star delta with two level guard and auto start unit panel board etc 7.5 HP

itemH1Code285

itemH1Code286

itemH1Code287

4.00 sqmm flat copper cable

50 mm Non Return Valve

50 mm GM Gate valve

50 mm GI Elbow

50 mm GI Union

50 mm GI reduced nipple

itemH1Code294

itemH1Code295

itemH1Code296

itemH1Code297

Labour charge for the erection of 7.5 HP submerciable pumpset into the bore well with fixing of panel board laying of cable etc. complete and commissioning of pumpset etc completed

Supply and delivery of following pumping main materials

75mm PVC 6ksc pipe

75 mm PVC bend

75 mm PVC MTA

75 mm PVC FTA

75 mm PVC Elbow

65 mm GI Pipe

65 mm GI Coupling

65 mm GI Elbow

65 mm GI Hex nipple

itemH1Code295

itemH1Code309

itemH1Code310

itemH1Code311

Supply and delivery of following pumping main materials

75mm PVC 6ksc pipe

63mm PVC 6ksc pipe

itemH1Code315

itemH1Code316

itemH1Code296

itemH1Code297

75 mm PVC bend

itemH1Code320

itemH1Code321

itemH1Code323

Supply and delivery of the following wiring materials

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.C

itemH1Code326

itemH1Code327

itemH1Code328

itemH1Code329

itemH1Code330

itemH1Code331

itemH1Code332

itemH1Code333

itemH1Code334

itemH1Code113

itemH1Code114

itemH1Code115

itemH1Code116

itemH1Code117

itemH1Code118

itemH1Code119

Providing and laying in position ready mixed or site batched design mix cement concrete for M25 grade cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/ Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge.

Plain surfaces Roofslab,floorslab,beams,lintels,loft,sillslab,staircase waist,portico slab and other similar works.

itemH1Code122

itemH1Code123

itemH1Code124

itemH1Code125

itemH1Code126

itemH1Code345

itemH1Code347

itemH1Code349

itemH1Code351

itemH1Code353

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification.

Providing and Laying good quality red earth filling, including cost & conveyance of red earth from approved sources to work site including labour for spreading, watering and compacting to achieve the required Proctor density at 100% compaction.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

itemH1Code359

itemH1Code360

itemH1Code361

6-Turf Cricket @ (Site I in Kalinkarajapuram)

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.

In Foundation & Basement Level.

In Ground Floor

Supplying and filling of gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

itemH1Code367

itemH1Code368

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

itemH1Code370

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Supplying, fabricating and placing in

itemH1Code138

itemH1Code375

itemH1Code376

s water to be removed through vacuum pump with bottom and top filter mat duly sealing the edges all- round including provisions of polythene sheet below the concrete layer before placing of concrete and finishing with power floated and power trowler to obtain the hard surface including provision of expansion joints at 6mtr. intervals across the platform by cutting 6mm wide and full depth of concrete by contractors own mechanical means and filling the gap with polysulphide sealant and adding admixture recon 3S for crack free construction at the rate of 125 gms pack per 50 kg of cement with all lead, lift and other incidental works etc., complete and as directed by the Engineer i/c (All labour, materials,tools and plants etc., including cement by the contractor only)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

itemH1Code379

d broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

5-Obstacles Course @ (Site I in Kalinkarajapuram)

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.

Brick work in Cement Mortar 1:5 ( One cement, Five sand) using best COUNTRY bricks for foundation and basement including curing, etc., complete complying with standard specifiction. In Foundation & Basement Level.

itemH1Code138

itemH1Code384

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

itemH1Code387

itemH1Code376

s water to be removed through vacuum pump with bottom and top filter mat duly sealing the edges all- round including provisions of polythene sheet below the concrete layer before placing of concrete and finishing with power floated and power trowler to obtain the hard surface including provision of expansion joints at 6mtr. intervals across the platform by cutting 6mm wide and full depth of concrete by contractors own mechanical means and filling the gap with polysulphide sealant and adding admixture recon 3S for crack free construction at the rate of 125 gms pack per 50 kg of cement with all lead, lift and other incidental works etc., complete and as directed by the Engineer i/c (All labour, materials,tools and plants etc., including cement by the contractor only)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

itemH1Code392

itemH1Code393

itemH1Code395

Providing and laying Water Bound Macadam Grading - II ( 75mm to 22.40mm) IRC HBG metal consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer. (Mix -in - place method) (From Road Data)

itemH1Code397

itemH1Code399

itemH1Code400

itemH1Code331

itemH1Code332

itemH1Code333

itemH1Code403

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Chain Link - 2 x 2 using 10 Gauge Galvanised Iron Wire (of all sizes) -M-0408

26- Fire Fitting Work @ (Site II in Plloor)

itemH1Code407

itemH1Code409

itemH1Code410

28- Toilet @ (Site II in Plloor)

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,

Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

itemH1Code415

itemH1Code416

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work

Supplying and fabrication of steel,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam

itemH1Code420

itemH1Code421

itemH1Code422

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Plastering with Cement Mortar 1:4 (One Cement and Three M.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position C.I.Manhole covers (heavy duty) of various sizes of best approved quality and as per standard specificationsetc.,complete.0.6X0.6M Size etc., complete.

13- Medal Podium @ (Site I in Kalinkarajapuram)

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., c

itemH1Code212

Supplying, fabricating and placing in

itemH1Code138

itemH1Code428

itemH1Code215

itemH1Code429

Long Jump Pit

Kho kho Court

Field (Shotput, Javelin throw, High Jump, Discus Throw)

17- Bore well @ (Site I in Kalinkarajapuram)

Drilling of borewell in Hardrock area including labour charges for insertion of PVC casing pipe.

supply and delivery of following casing pipes and specilas

itemH1Code278

itemH1Code279

itemH1Code280

Kho kho Court

itemH1Code282

Supply and delivery of three phase star delta with two level guard and auto start unit panel board etc 7.5 HP

itemH1Code285

itemH1Code286

itemH1Code287

4.00 sqmm flat copper cable

50 mm Non Return Valve

50 mm GM Gate valve

50 mm GI Elbow

50 mm GI Union

50 mm GI reduced nipple

itemH1Code294

itemH1Code295

itemH1Code296

itemH1Code297

Labour charge for the erection of 7.5 HP submerciable pumpset into the bore well with fixing of panel board laying of cable etc. complete and commissioning of pumpset etc completed

Supply and delivery of following pumping main materials

75mm PVC 6ksc pipe

75 mm PVC bend

75 mm PVC MTA

75 mm PVC FTA

75 mm PVC Elbow

65 mm GI Pipe

65 mm GI Coupling

65 mm GI Elbow

65 mm GI Hex nipple

itemH1Code295

itemH1Code309

itemH1Code310

itemH1Code311

Supply and delivery of following pumping main materials

75mm PVC 6ksc pipe

63mm PVC 6ksc pipe

itemH1Code315

itemH1Code316

itemH1Code296

itemH1Code297

75 mm PVC bend

itemH1Code320

itemH1Code321

itemH1Code323

Supply and delivery of the following wiring materials

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.C

itemH1Code326

itemH1Code327

itemH1Code328

itemH1Code329

itemH1Code488