Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.7 LAccepted-Finance | ₹36.7 L | L1 | Accepted-Finance BEING LOWEST |
| 2 | L2₹38.9 LRejected-Finance | ₹38.9 L | L2 | Rejected-Finance NOT BEING LOWEST |
| 3 | L3₹43.2 LRejected-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | ₹43.2 L | L3 | Rejected-Finance NOT BEING LOWEST |
| 4 | L4₹45.0 LRejected-Finance 27 2 1ST MAIN ROAD GOKULA 1ST STAGE 1ST PHASE BANGALORE 560054 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560054 | ₹45.0 L | L4 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | santulan & Company L1 | George Electricals L4 | WAIKHOM BASANTA SINGH L2 | R k construction L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. liad in any type of motar all as specified and directed. | 32.8 | X Sqm | 60 ₹1,968 | 50 ₹1,640 | 452.14 ₹14,830.19 | 10 ₹328 |
| 2.00 | M & L Cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors | 384 | Sqm | 55 ₹21,120 | 240 ₹92,160 | 134.29 ₹51,567.36 | 110 ₹42,240 |
| 3.00 | M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 all as specified and directed. | 584 | Sqm | 80 ₹46,720 | 150 ₹87,600 | 133.44 ₹77,928.08 | 55 ₹32,120 |
| 4.00 | M&L for Vitrified Ceramic tiles 10 mm thick Colour dark shade (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match | 328 | Sqm | 900 ₹3.0 L | 1,150 ₹3.8 L | 963.43 ₹3.2 L | 980 ₹3.2 L |
| 5.00 | M&L Vitrified Ceramic tiles Light Shade 10mm thick (square/rectangular) polished as in Vertical Surface/Dado/Skirting etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4 complete all specified and directed. | 28 | Sqm | 775 ₹21,700 | 1,000 ₹28,000 | 1,177.61 ₹32,972.94 | 980 ₹27,440 |
| 6.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 256 | Sqm | 10 ₹2,560 | 50 ₹12,800 | 58.18 ₹14,892.80 | 20 ₹5,120 |
| 7.00 | M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed. | 56 | Sqm | 790 ₹44,240 | 1,200 ₹67,200 | 880.81 ₹49,325.28 | 900 ₹50,400 |
| 8.00 | M&L Glazed Ceramic Coloured Tiles, 450x300/300x600x7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. | 200 | Sqm | 875 ₹1.8 L | 1,150 ₹2.3 L | 1,005.08 ₹2.0 L | 950 ₹1.9 L |
| 9.00 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:4 complete all as specified and directed. | 70 | Sqm | 1,150 ₹80,500 | 750 ₹52,500 | 848.74 ₹59,412.08 | 1,050 ₹73,500 |
| 10.00 | M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over a 10mm thick plaster in CM 1:3 all as specified and directed. | 10 | Sqm | 1,150 ₹11,500 | 800 ₹8,000 | 826.91 ₹8,269.11 | 1,050 ₹10,500 |
Updated dates
Tender Value
₹48.9 L
EMD Value
₹97,800
Closing Date
6 Apr 2026, 6:00 pmClosed
Garrison Engineer
GE AF LOHEGAON PUNE-411032
SPECIAL REPAIR TO OFFICERS MESS AND POI AT AFS PUNE UNDER GE AF LOHEGAON
2026_MES_755785_1
8041
Open Tender
Civil Works
180 days
AFS PUNE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF LOHEGAON
₹97,800
Yes
21 May 2026
10 Mar 2026
13 Apr 2026
10 Mar 2026
6 Apr 2026
24 Mar 2026
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. liad in any type of motar all as specified and directed.
M & L Cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors
M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 all as specified and directed.
M&L for Vitrified Ceramic tiles 10 mm thick Colour dark shade (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L Vitrified Ceramic tiles Light Shade 10mm thick (square/rectangular) polished as in Vertical Surface/Dado/Skirting etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4 complete all specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.
M&L Glazed Ceramic Coloured Tiles, 450x300/300x600x7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:4 complete all as specified and directed.
M & L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over a 10mm thick plaster in CM 1:3 all as specified and directed.
M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade
Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level)
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.
M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection
Dismantling roof treatment of any description in suspended slabs in roofs,suspended floors, chajjas, landings etc,including cement mortar bedding,padding concrete and rubbish of premises complete all as directed.
Cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm
M&L cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in RCC roof surface with mixing of water proofing compound to horizontal or vertical surfaces finished cement concrete surface even and smooth including necessary form work (Water proofing compound will be measured separately)
M & L for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. including water proofing compund all as specified and directed.(Water proofing compound will be measured separately)
Supply only Liquid WPC
Applying Bitumen Primer conforming to IS-3384 applied @ 3 kg/Sqm and Providing 3mm thick Atactic Polypropyle Polymer(APP) modified water proofing membrane weighting not less than 3 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm/sqm and applying a coat of blown grade hot bitumen 85/25 over the mebrance @ 1.2 kg/sqm top of membrane surface shall then be finished complete all as per manufacturer instructions and as directed by Engineer-in-Charge.
Applying aluminium bitumen based paint complete all as directed by Engineer-in-Charge.
Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.
Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm.
Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each
Taking down shutters of any description n exc 1 sq. m each.
Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.
Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.
S & F aluminium anodied powder coated frame ( miniumum thickness of powder coating 50 micron) for doors widnow, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (For Sliding Windwo shutters)
S & F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and directed by Engr -in-Charge.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F 35 mm thick second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc.complete all as specified and as directed.
S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S & F 100 mm size butt hinges, medium weight, cold rolled brass complete all as specified and as directed.
S &F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.
S &F 150mm long extruded aluminium alloy handlesfabricated type anodised all as specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.
S&F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia
M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors
Fixing only 15mm dia tubes, any grade, to walls and ceilings or laying in floors
M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs
Fixing only 20mm dia tubes, any grade, to walls and ceilings or laying in floors
M&L for cutting chases, pinning in making good to face for concealed water tubing in stone concrete blocks or slab walls all as specified and directed.
Dismantling water tank exc 250 and n exc 500 ltrs and remvoing to all as specified and directed.
S&F Universal type three layers, white colour rotational moulded polyethylene water storage tank of 500 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) , Pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete, Plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.
S & F Vitreous China wash basin (oval type), white, flat back, size 550x450 including waste, chain and plug and porcelain stopper but including brackets,450mm PVC connection with barass screws, waste coupling, 32 mm dia all as specified and as directed.
S & F in repair 10 Ltr PVC low level flushing system plastic valve with inlet ball valve float including brackets , flush pipes to pedestal pan , including all joints fixied in repair all as specified and directed.
S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed
S&F in repair for 15 mm dia CP pillar cock, cast copper alloy complete all as specified and directed .
M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed.
S & F in repair Angular stop cock with flange , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S &F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed
S &F Two way bib cock with wall flange 15mm dia all as specified and directed.
S & F wall mixter 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe connecting legs and wall flange (wihtout hand and over head shower) all as specified and directed.
S & F Corner glass shelf with brackets all as specified and directed.
S & F round 150mm dia shower all as specified and directed.
S &F Soap dish holder all as specified and dirrected.
S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified .
S &F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.
S & F stainless steel fancy type curtain rod 20 mm bore including fixing and two sides brackets all as specified & as directed.
Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar (100mm dia)
S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor all as specified and directed.
S &F PVC (SWR) bends with oval acess door 75mm dia
S &F PVC (SWR) bends with oval acess door 100mm dia
S &F PVC (SWR) cowls of 75mm dia
S & F PVC (SWR) reducers 75mm dia
S &F 110mm PVC (SWR) junction single (Single T) equal or unequal with acess door
S &F 75mm PVC (SWR) junction single (Single T) equal or unequal with acess door
S &F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.(Window Grills)
Taking down cement plaster on brick/stone wall etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:6 and is to be finished even and smooth with out using extra cement complete all as specified directed
M & L for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.
M & L for 5mm thick ceiling cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.
Demolition of Brickwork or stone/boulder masonry/PCC bloack masanory, built in cement motar all as specified and directed.
M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) with 20mm aggregate and set in CM (1:6).
M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour complete.
Complete removal of existing treatment on walls all as specified and directed.
M&L for 1mm thick wall care putty on wall all as specified and directed by Engr in Charge.
M & L for distmepring with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved munufacutre of required shade and colour complete as per munufacuters specification two or more coat on new work all as specified and directed.
M & L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing on old plastered surfaces of walls all as specified.
All as per ser item No 1 above but on surface of on ceiling /soffits of slabs, chajjas all as specified and as directed at site.
M & L for Preparation of old painted steel/iron surfaces of any description having width/girth exceeding 10cm and applying one coat of synthetic enamel paint for material and labour complete.
M & L for Preparation of new steel/iron surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over red oxide primer for material and labour complete.
S &F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof (75mm dia)
S &F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof (100mm dia)
Demolition of concrete of any description and in any position not othewise specifically provided for sunken treatment all as specified and directed by Engineer in Charge.
M&L for 75mm thick PCC in (1:2:4) type B2 using 40mm graded stone agg as in sunken floor complete all as specified and as directed
M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed
M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed
M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sam(VG-10 grade) per coat as in sunken floor complete all as directed
M&L for polythene flim black 50 micron laid in sunken floor complete all as directed
M&L for spout of 50mm bore PVC pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed
M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)
Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 5km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings.
S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.
Dismantling wooden boarding, any description, fixed in any position with screws complete all as specified and directed .
S&F in repair 18/19 mm pre- laminated particles board exterior Gde, pre-laminated one side with decorative choice lamination & other side balancing white laminateion fixed with screws to timber frame work. (for Kitchen cabinets/cupboards / shelves and similar works)
M/L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area n. exc. 6 Sqcm.
S/F butt hinges 75mm extruded brass with MS hinges pin, bright polished and fixed type D-11
S/F brass cup board lock 75mm size 4 level with duplicate keys
S/F brass handles extruded fabricated type 100mm size.
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than than 50gm/litre and UV resistance as per IS 15489:2004 Alkali and fungal resistance, dirt resistance exterior paint or required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.9 litre/10 sqm over new surfaces/old surfaces of wall all as specified and directed.
Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc.
Taking down Ceiling fan any size or any type and deposited to MES store yard complete all as specified and directed.
Taking down Exhaust fan any size or any type and deposited to MES store yard complete all as specified and directed.
Taking down old Electric Meter of any type and deposited to MES Store Yard complete all as specified and directed.
Taking down old and unserviceable submain wiring any size /type including earth wire complete with batten/conduit etc complete all as specified and directed
Taking down old Water Heater (Geyser) any type/Size/Capacity with all accessories after removing of all incoming/outgoing pipe line connection and deposited to MES Store Yard for repair complete all as specified and directed.
Taking down old unserviceable VPTN MCCB DB/MCB TPN DB/MCB SPN 12 way any of size/capacity complete all as specified and directed.
Taking down old unserviceable MCB SPN/MCB SP of any size/capacity complete all as specified and directed.
Ditto all as per item No 118 here in before but for socket out let point 5 Amps on same board
Description all as per item No 118 here in before but for socket out let point 5 Amps on independent board
Description all as per item No 118 here in before but for one bell point controlled by one bell push.
All as per srl item No 118 above but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor
Supply and fix in repair modular switch 1 way 6A, 1 module , 230 volt , AC supply, ISI Marked, complete all as specified and directed.
Supply and fix in repair modular switch 1 way, 16A,1 module, 230 volt , AC supply, ISI Marked, complete all as specified and directed.
Supply and fix in repair modular socket outlet 6A-3 Pin combined 2 module, 230 volts ,ISI Marked, complete all as specified and directed.
Supply and fix I repair modular socket outlet 6/16 A-3 pin combined 2 modules, 230 volts ,ISI Marked, complete all as specified and directed.
Supply and fix in repair modular fan regulator 1/2 modules, 120W, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified.
Supply and fix in repair modular bell push, 6 Amps one module , 230V,50Hzs, supply complete all as specified and directed
Supply and fix in repair call bell ding dang /musical type single pole complete all as directed
Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.
Supply and fixing LED light fitting 9/12 W wall mounting fixture (Sketch type) suitable for retrofit LED lamp B22 compact and energy efficient epoxy powder coated light luminaire complete all as specified and as directed by Engineer in-Charge.
Supply and fixing of LED light fitting 1x20W , 220V,not less than 100 lumen per watt, AC with aluminium housing with batten type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifid and directed. Note: LED cool white/warm white must get approved from engineer-in-charge.
Supply and fixing surface mounted wall Mirror LED light compact & sturdy 10W LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications all accessories & fixtures, internally prewired and connecting by providing copper flexiabkle wire 23/0.0076 mm twin core upto fitting completeall as specified and directed.
Supply and fixing LED Bldg security light fitting of capacity 35 Watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safty input voltage range 170 to 270 volts, with IP66 protection and other connected accessories including service bracket bend to 120º angle made of MS pipe 25/32mm bore of length 0.9 mtr duly painted with anti corrosive paint with MS clamps, bolts, nuts and washers and suitable reducer for connecting to MS pipe as required at site and making electrical connection complete all as specified and directed.
Supply and fixing Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps
Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm,green colour for earth continuity conductor including complete, all as specified and directed.
Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4.0 sqmm,green colour for earth continuity conductor including complete, all as specified and directed.
Supply and fixing sheet metal enclosures vertical distribution board VTPN, (MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including adjustable thermal setting MCCB 4 Pole, 125 Amps 25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including and making connection with suitable size of lugs and making good the disturbed surface matching with existing surface all as specified and dire
Supply , insatallation, testing of SPN distibution board 12 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specifid.
Supply and fixing MCB SP single pole, 240 volts, 50 Hz, breaking capacity , 6 to 32 Amps, ISI marked, complete all as specified.
Supply and fixing MCB SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA complete all as specified and directed.
Hanging only ceiling fans and connecting up including provision of cable from ceiling rose or connector toceiling fan including cleaning and minor repair and replacement of split pin , hook and rod/pipe of required length with fixing arrangement etc completeall as specified and directed by Engineer-in-Charge
Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan
Fixing only geyser 25 Ltrs in position, connecting to existing electric & water connections with SS braided connection pipe of length not less than 60cm heavy duty hot water grade with allied accessories and testing at site complete all as specified and directed.
M&L for re-fixing single phase electric meter any type and any capacity with all accessories with making all connection complete all as specified and directed
Supply and fixing or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. Mm, 3 ½ core complete all as specified and directed.
Supply & Fix double wall corrugated pipe class SN 4.75 mm dia, including laying in trench, passing cables etc the length of each DWC pipe line shall not less than 6 Meter length all as directed by engr in charge.
Supply and fixing cable protection GI Tubes of bore 40 mm ,'light grade' ,with all fittings and fixed complete to walls and ceilings or laid in floors,complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth hard dense soil; for laying of cable, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth soft disintegrated rock; for laying cable, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, Hard/de- Mud Soft/dis Hard dense soil
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, Hard/de- Mud Soft/dis soft integrated rock
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
Supply install, test and commissioning LT wall mounted indoor Panel board factory fabricated made out of 2 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and outgoing MCCB, MCB and TPN copper bus bars of rating not less 1.5 times the rated cap of incomer MCCB. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The incoming as well as outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. A detachable predrilled gland plateof thickness not less than 2 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front openable lockable /openable by key, The Panel shall be manucatured from CPRI approved manufacturerof makes stipulated. The cost is inclusive of disconnecting existing cables, taking down existing panel, reconnecting the cables with lugs & glands,making good of distribued PCC all as directed, the panel shall comprises of the folowing. (a) Incoming MCCB FP 415 Volt 160 Amps 25 kA - 01 Nos (b) Outgoing MCCB TP 63 Amps, 230 Volts , 16 kA - 8 Nos (c) Outgoing MCB SPN 40 Amps, 230 Volts , 10 kA - 3 Nos (d) Space for fixing of 8 Nos Three phase energy meter & Provision should be made in panel to visible of energy meter reading fixed in panel door. Note :- (i) The cost quoted is deemed to be inclusive of taking down of energy meter from existing panel and fixing the same in new panel including necessery connection etc (ii) Layout diagram of panel shall be got approved by GE.
Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 32 X 6 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab cover 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade, including galvanised iron strip 25X4 mm with GI protection pipe of 40 mm medium grade up to 7.5 meter length, etc complete all as specified.
S & F GI earth continuity conductor or main earthing lead of size 32x6 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc. as required complete all as directed.
Taking dowen and Supplying & Laying GI pipe medium grade in trenches indluding all fittings as directed of following sizes:-
(a) 25 mm bore
(a) 50 mm bore
Taking down and Supplying & Laying GI pipe medium grade fixed complete to walls and ceilings or laid in floors indluding all fittings as directed of following sizes:-
(a) 25 mm bore
(b) 50 mm bore
Supply and fix gun metal gate valves with iron wheel head, screwed both ends for iron pipe ISI marked as per IS 778 of following sizes
(a) 25 mm bore
(a) 50 mm bore
Construction of valve pit chamber of sizes 600 x 600 x 750 mm with brick massonary, one brick thick wall in cement mortor (1:4) on 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation complete including neccessary exc and earthwork in any type of soil, formwork, 15 mm thick cement & plaster rendering internally all arround over brick wk & externally upto 15cm below normal GL with 10 SWG thick MS sheet cover incld 40 x 40 x 6mm MS angle frame fixed locking arrangement and painting with one coat of red oxide and two coats of black Bituminous paints all as specified and directed by Engr-In-Charge
M&L for cutting of existing GI pipe dia up to 50 mm in position for insertion of new GI tee for branch connection complete with all fittings.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.25 MB
8041COMMONPAGES.pdf
Tender Documents • 0.44 MB
8041PS.pdf
Tender Documents • 0.65 MB
BOQ_846551.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid