Construction of Toilets with RCC roof for 31 Nos Anganwadi Center at Musabani Block of East Singhbhum District under DW and Sanitation Division Jamshedpur

Part (A)- TOILET Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees.

Long Wall

Short Wall

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Long Wall

Short Wall

Providing designation 75B brick work in C.M.(1:10) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. 15cm thick and 25cm wide

Long Wall

Short Wall

Providing 125mm thick brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Long Wall

Short Wall

Providing average 150 mm thick dry rammed khoa beaten to 112mm (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing and carriage of water with all leads, making proper slope and blending the top with cement mortar (1:10) all complete as per building specification and direction of E/I.

Net Qty. of rammed khoa

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I.

Providing and laying 6 mm precast white glazed tiles in walls over 12 mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curring taxes and including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I

Total Tiles Areas

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building spacification and direction of E/I.

Net Qty. of cement punning

Providing 12mm inside and outside wall plaster (1:6) with 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building spacification and direction of E/I.

Total

Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning, sand papering the wall,scaffolding,curing and taxes all complete as per building specification & direction of E/I.

Providing 50mm thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete with 5% cico or any other approved water proofing compound and placing in position, striking, curing, taxes

Long Wall

Short Wall

Providing designation 75A 125mm thick brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Net Brick work in super structure

Providing designation 75A brick work in C.M.(1:6) for platform of water tank with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints cost of screening marerilas, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm).PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places.

Supplying fitting and fixing white glazed Rural pan. With P- trap & Foot rest of approved make.

Supplying fitting and fixing of following Nominal dia, 25 MM UPVC pipe, Tee and Bend etc.

Providing R.C.C M-200 in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (But excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of Engineer-in-charge.

Water Tank Slab

Providing M.S reinforcement as per approved design and drawing carriage of M.S Rods (straight or in coils) to work site cutting, bending and binding with anneled wire, with cost of wire, removal of rust placing the rods in position all complete as per building specifications and direction of Engineer-in-charge.

Special type of C.P. Bath room fittings for V.l.P. Buildings (JAL, Jaquar, Marc or equivalent make) (lSl Marked) M961

Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 100.00 litres Capacity Water storage Tank

9/10 Watt LED Bulb IEC:-62722, (Common Item of Works Pg.170 Code-M-855)

1.5 Sq. mm ISI Marked FR LS PVC insulated Single Core Cupper conductor cable (Conforms to IS:694:2010) , (Common Item of Works Pg.154 Code-M-445)

Modular GI Box for 2 module , (Common Item of Works Pg.156 Code-M-512)

B:Leachpit Earth work in excavation in foundation trenches in Hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees,, shrubs all complete as per approved design, building specification and direction of E/I.

Providing 75mm thick designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing designation 75A brick work in C.M.(1:4) in foundation with approved quality of clean coarse of EM 2 to 2.5 inlucing providing 10 mm thick mortar Joints,costs of screering.materials scaffolfing raking out joints to 15 mm depth curing axes and royalty Jalt completeas per building specification and direction or E/I. Leaching Pit

Providing precast R.C.C M-150 with nominal mix(1:1.5:3) of roof slab of desired size in with approved quality of stons chips 20 mm to 6 mm size graded and clean coarse sand of F.M . 2.5 to 3 including screening , shuttering mixing cement concrete in mixer and placing in position , vibrating striking curing ,taxes and royality all complete as per building specification and direction of E/I.

Providing tor steel reinforcement of 8mm dia. Rods as per approved design and drawing execluding carriage of bars to worksite, cutting bending and binding with annealed wire with cost of wire removal of rust , placing the rods in position all complete as per building specification and direction of E/I.

Providing 12mm thk. Cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5 mm thick cement punning including curing carriage of water with all leads and lifts as per building spacification of E/I.

Supplying fitting and fixing 110 mm pvc pipe

100 MM dia bend.

Juntion Box

Add GST 18%

Add Labour Cess 1%