Repair of all type of Wooden furniture under GE (AF) Borjhar

Amount

SOFA SET 4/5 PERSON WITH CUSHION ( FD-373/281)

Replacement of existing unserviceable cushion of Sofa Set with new foam cushion 40 density 100mm thick of approved make duly covered with tapestry cloth including mulmul cloth and steching, rest all as shown on drg and as directed by Engr-in-Charge. Note : (i) Each cushion for seat or back will be measured as single unit. (ii) The tapastry cloth shall be mat finish and shall not less than Rs. 350/- per metre and as approved by GE /Engr-in-Charge

Removing the existing unserviceable front leg from Sofa and Supply and fix new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing the existing unserviceable rear leg from Sofa and Supply and fix new first class teak wood of leg size 70mm x 35 mm x 530mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable Arm rest from Sofa and Supply and fix new first class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable side rail from Sofa and Supply and fix new first class teak wood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable bearer from Sofa and Supply and fix new first class teak wood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable battens from Sofa and Supply and fix new first class teak wood battens of size 50mm x 20 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa three seater and Supply and fix new first class teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable front rail from Sofa single seater and Supply and fix new first class teak wood front rail of size 35mm x 10mm x 530 mm, rest all as shown on drg and as directed by Engr-in-Charge.

BED PLYTOP (FD-246/247)

M&L for removing unserviceable plywood top from Bed plytop (FD-246/247) and supply and fix new plywood top made of 12 mm thick BWR Phenol bonded commercial plywood of approved make with suitable screws all as specified in drg and as directed by Engr in Charge.

S&F in repairs to 1st quality teak wood long rail as per existing size of Bed including removal of damaged long rail all as specified on drawing or as directed by Engineer-in-charge.(Each long rail will be measured as single unit)

All as per item No. 2.02 but short rail all as specified on drawing or as directed by Engineer-in-charge. (Each short rail will be measured as single unit)

S&F in repairs to head board consisting of 60 x 30 x 260mm vertical size and 30 x 60 x 400mm horizontal including legs of size 60 x 60mm in section at top and length 400mm from bottom of leg and 30 x 30mm in section at bottom complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

All as per item No.2.04 but foot board consisting of 22 x 75mm in section teak battens 3 Nos at equal space, joining top and bottom horizontal rails of foot board. The top and bottom horizontal rails of size 30 x 60mm shall be 1st quality of teak wood. The vertical legs above horizontal rails shall be 30 x 60mm all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 340mm including 12mm dia half round teak wood beading of both side of head board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to 4mm thick OST plywood commercial of size 780 x 180mm including 12mm dia half round teak wood beading of both side of foot board including removal of damaged ply all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to flat iron of mild steel of size 35mm x 5mm, bents to right angle on each corners of Bed ply top all as specified on drawing or as directed by Engineer-in-charge.

CHAIR EASY (FD-203/229)

Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and supply and fix new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and supply and fix new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front frame and supply and fix new teak wood front frame including drilling holes @ 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front/back rail and supply and fix new teak wood front rail complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and supply and fix new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable cane from chair easy and Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 2.00 x 0.46 mm cane and border with 3x0.60 mm cane complete all as specified on drawing or as directed by Engineer-in-charge.

Chair dining (FD-228/279)

Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and supply and fix new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and supply and fix new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail supply and fix new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and supply and fix new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable stiffeners and supply and fix new teak wood stiffners complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable cane from chair easy and Recaning of repaired chair easy with best quality of approved plastic cane 2.00 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

Chair dining officer (FD/MAP-II/04)

Repairs to seat of chair dining officer by replacement of unserviceble foam coushion with new foam cushion with fabric of 75MM TH 40 density including replacement of 12mm thick ply wood. (tapastry shall be new costing minimum of Rs.350/- Per/M ), complete all as shown on drg and as directed by Engr-in-charge

Removing the existing unserviceable rear leg and Supply and fix with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and Supply and fix with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front/side rails and Supply and fix new teak wood side rails complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable stiffners and Supply and fix new teak wood stiffners complete all as specified on drawing or as directed by Engineer-in-charge.

Chair writing (FD-202/250/280)

Removing the existing unserviceable rear leg and Supply and fix with new teak wood rear leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front leg and Supply and fix with new teak wood front leg complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable back rest and Supply and fix new teak wood back rest slightly curved complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front rail and Supply and fix new teak wood front rail drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable rear rail providng new teak wood rear rail including drilling holes at 12.5 mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable side rails and Supply and fix new teak wood side rails including drilling holes at 12.5mm C/C complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable broken arm rest and Supply and fix new teak wood arm rest complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable cane from chair writing and Recaning of repaired chair writing with best quality of approved plastic cane 2.00 x0.46mm and border with 3x0.60mm cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

Stool Dressing CB (FD-282)

Removing the existing unserviceable cane from stool dressing and Recaning of Stool dressing with best quality of approved plastic cane half round 2mm wide and 0.4mm thick plastic cane of white or cream ivory all as specified on drawing or as directed by Engineer-in-charge.

Bin Linen Multipurpose ( FD/E6/MAP/09)

Removing the existing unserviceable door shutters from bin linen multipurpose and supply and fix new door shutter made to shape, made of 18 mm thick prelaminated particle board exterior grade duly providing 6 mm teak wood beading all around duly french polished including all fitting and fixtures i.e magnetic catcher all as shown on drg and as directed Note : (a) Handle shall be chromium plated 100 mm long (b) hinges shall be full size of approved quality.

Removing the existing unserviceable Top from Bin linen multipurpose and supply and fix new top as to match with the existing , made of 18 mm thick prelaminated particle board exterior grade duly providing 4 mm teak wood beading all around duly french polished all as shown on drg and as directed.by Engineer-in-charge.

Removing the existing unserviceable drawer from Bin linen multipurpose and supply and fix new drawer made of 18 mm thick prelaminated particle board exterior grade made to shape, including 100 mm chromium plated handle, providing 4 mm teak wood beading duly french polished all as shown on drg and as directed.by Engineer-in-charge.

Removing the existing unserviceable back from bin linen multipurpose and Supply and fix new Back with 12mm thick BWR commercial ply of approved make all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unsv handle from drawer and door shutter of bin linen multipurpose and supply and fix new chromium plated handle of size 100 mm D shaped all as shown on drg and as directed by Engineer-in-charge.

Removing the existing unsv hardwood stiffener from bin linen multipurpose and supply and fix new hardwood stiffener of size 25x25 mm duly french polished all as shown on drg and as directed.by Engineer-in-charge.

Hat Stand with mirror (FD-233)

Supply & Fixed in repairs new mirror 5 mm thick for Hat stand with mirror of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge.

Removing of existing unserviceable Back of Hat stand with mirror and Supply and fix new Back of 6mm plywood commercial shall be fixed with headless nail, rest all as shown on drg and as directed by Engr-in-Charge.

Removing of existing unserviceable brass pegs with brass screw and supply and fx new brass pegs with brass screw hat stand with mirror, rest all as shown on drg and as directed by Engr-in-Charge.

SIDE BOARD (FD-241,FD-1112)

Removing the existing unserviceable top of side board and Supply and fix new top made out of 18mm thick prelaminated particle board exterior grade all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable sides of side board and Supply and fix new sides made out of 18mm thick prelaminated particle board exterior grade all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. Note : Each side will be measured as single unit

Removing he existing unserviceable back of Side Board and Supply and fix new Back with 6mm thick plywood commercial type of all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable Top drawer and Supply and fix New drawer with handle made out of 12 mm thick particle board having ply on both sides.The drawer shall be run as 19 mm x 19 mm thick teak wood batten all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable Drawers (other than Top drawers) and Supply and fix new drawer with handle made out of 12mm thick particle board having ply on both sides. The drawer shall be run as 19mm x 19mm thick teak wood bearer all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. Note : Each drawer will be measured as single unit

Removing the existing unserviceable shutter and Supply and fix new shutter made out of 18mm thick prelaminated particle board exterior grade including Hinges and lock all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. Note : Each shutter will be measured as single unit

Removing the existing unsv handle from drawer and door shutter of side board and supply and fix new chromium plated handle of size 100 mm D shaped all as shown on drg and as directed.by Engineer-in-charge.

Removing the existing unserviceable leg frame of side board and Supply and fix teak wood 2nd class hard wood leg frame all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

Removing the existing unserviceable broken legs of side board and Supply and fix new teak wood leg 2nd class hard wood of size 45 x 45 x 125 mm but at bottom 25 x 25 mm all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge. Note : Each leg will be measured as single unit.

Table dining 8 persons (FD-273)

Replacement of existing unserviceable table top for Table dining 8 persons and S&F new top made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 8 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table dining 6 persons (FD-273/ FD/MAP-II/03)

Replacement of existing unserviceable table top for Table dining 6 persons and S&F new top made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 6 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table dining 4 persons (FD/MAP-II/03)

Replacement of existing unserviceable table top for Table dining 4 persons and S&F new top made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table dining 4 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side short rails from Table dining 4 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front/back long rails from Table dining 4 persons made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Common for Table dining 8/6/4 persons

S&F in repairs Triangular wooden bracket 100X100X20mm thick for all types of tables between leg & stiffners for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge.

Teapoy : (FD-278, 34, 382)

Replacement of existing unserviceable table top for teapoy and S&F new top made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Centre (FD-274 / 235)

Replacement of existing unserviceable table top for Table centre and S&F new top made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from table centre made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Table Writing : (FD-33,275, )

Removing existing unserviceable top from table writing and supply and fix new top made out of 18mm pre laminated particle board one side laminated finish, providing 4 mm thick teak wood beading all around the top duly french polished complete all as shown in drg and as directed by Engr in charge.

Removing existing unserviceable leg from table writing and supply and fix new leg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable long stiffener from table writing and supply and fix new long stiffener made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable back which house the drawer and cabinet from table writing and supply and fix new back made out of 6 mm thick approved commercial plywood , rest all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable drawer from table writing and supply and fix new drawer made to shape,provided with proper locking arrangement and handle, all as shown on drg and as directed by Engr-in-Charge.

Removing existing unserviceable cabinet door of table writing and supply and fix new cabinet door made of 18mm thick prelaminated particle board along with locking arrangement and handles, as shown on drg and as directed by Engr-in-Charge.

Removing the existing unsv handle from drawer and cabinet door of table writing and supply and fix new handle all as shown on drg and as directed.by Engineer-in-charge.

TABLE PEG (FD-236, FD-277)

Replacement of existing unserviceable table top for Table peg made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged top rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom rail from table peg made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

TABLE DRESSING GENTS WITH MIRROR (FD-230)

Replacement of existing unserviceable drawer for Table dressing gents and Supply and fix New drawer made out of 12 mm thick particle board having ply on both sides. The drawer shall be run as 12 mm x 12 mm thick teak wood batten all as specified on drawing or as directed by Engineer-in-charge. Note : Each drawer should be measured as single unit

M&L for removing unserviceable looking mirror from table dressing gents and supply and fix new looking mirror of 5.5 mm thick of appropriate size along with wooden frame and 6 mm thick plywood back of the mirror all as specified in drg and as directed by Engr in Charge.

S & Fixed in repairs new top made out of 18 mm thick pre laminated particle borad exterior grade of approved make, all as specified on drawing or as directed by Engineer-in-charge.

TABLE DRESSING LADIES (FD-251)

S & Fixed in repairs table top of Table dressing ladies with 18 mm thick pre-laminated particle Board exterior grade of approved make, all as specified on drawing or as directed by Engineer-in-charge.

S&Fixed in repairs new Glass shutters of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.(Each glass shutter shall be measured as single unit)

Removing the existing unserviceable Aluminium channel and S & Fixed in repairs Aluminium Channel all as specified on drawing or as directed by Engineer-in-charge.

S & Fixed in repairs new back support made out of 6 mm thick plywood for mirror of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge.

M&L for removing unserviceable looking mirror from table dressing ladies and supply and fix new looking mirror of 5.5 mm thick of appropriate size along with wooden frame and 6 mm thick plywood back of the mirror all as specified in drg and as directed by Engr in Charge.

Supply & fixing of Knob of aluminium anodized dark brown in shade as approved by GE & in the following furniture items with screws as specified & as directed by Engr-in-Charge:- Table dressing gents with mirror & Table dressing ladies with mirror.

Replacement of existing unserviceable drawer from Table dressing ladies and Supply and fix new drawer made to shape. sides and back of drawer shall be 12 mm thick teak wood plank all as specified on drawing or as directed by Engineer-in-charge. Note : Each drawer should be measured as single unit

Table 3'x2' with/witout drawer.(FD-283/284)

Replacement of existing unserviceable table top from Table 3'x2' with/witout drawer and supply and fix new top made out of prelaminated particle board 18mm thick with one side teak facing and balancing white on the other side and fixed with 18x4mm wooden beading (teak) on all the four sides all as specified on drawing or as directed by Engineer-in-charge.

S&F in repairs to unserviceable damaged legs from Table 3'x2' with/witout drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged bottom stiffners (both short & long) fromTable 3'x2' with/witout drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged side rail from Table 3'x2' with/with out drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged front and back rail from Table 3'x2' with/without drawer made out of first class hard wood (teak) complete, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of existing unserviceable drawer from Table 3x2 with drawer and Supply and fix new drawer made to shape. side and back of drawer shall be 12 mm thick teak wood plank. all as specified and shown on drawing or as directed by Engineer-in-charge. Note : Each drawer should be measured as single unit

M&L preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coats of french polish over a coat wax to the depressed surface for smooth finishing complete all as specified on drawing or as directed by Engineer-in-charge. for the following furniture articles:-

Sofa set 4 seater FD-281/373/258

Sofa set 5 seater FD-281/373/258

Bed Ply top/Bed newar FD-246/ 247

Chair Dining FD-228, FD-279 or Similar

Chair Easy, FD-203,FD-229 or similar

Chair writing, FD-202, FD-250, FD-280 or similar

Stool Dressing FD-282

Bin Linen multipurpose FD/E6/MAP/09

Hat Stand with mirror FD-233

Side Board FD-241,FD-1112

Table dining 8 persons FD-273

Table dining 6 persons FD-273

Teapoy FD-278, 34, 382

Table centre FD-274 / 235

Table writing FD-33,275,

Peg Table FD-236, FD-277

Table dressing Gents with mirror FD-230

Table dressing Ladies with mirror FD-251

Table 3'x2' with/without drawer.FD 283

Table dining 4 person FD-291/FD/MAP-II/03

Chair dining officer FD/MAP-II/04

Table office offr wooden

Locker wooden

Table bed side FD-276

table office clk wooden

KIRAN REED INDUSTRIES (BID ID -3220782)

M/s Vishnu Enterprises (BID ID -3224217)

KUNDAN ENGINEERS AND BUILDERS (BID ID -3224204)