REPAIRS TO COMPOUND WALL AND OTHER MISC WORKS AT MH KHADKI UNDER GE MH AND RH KHADKI

Amount

Demolition of Brick/PCC solid block masonry built in cement mortar/cement lime mortar including removing the debries to a distance n exc 50m complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge

M&L for rendering 15mm thick in CM 1:4 mixed with water proofing compound as per manufacturer's instructions on block walling / concrete surfaces finished even and smooth without uing extra cement all as directed. Note :- Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound.

Demolition of concrete of any description below or above ground and in any position not otherwise specifically provided for complete all as directed.

M&L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in coping and benching of manholes etc., finished even and smooth without using extra cement including neceessary form work complete all as specified and directed.

M&L for PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate),100 mm thick path, floor, parking etc construction joint after every 2 mtr interval and from wall will be filled by mastic complete all as specified and directed.

Demolition of reinforced cement concrete of any description as in cover slab etc and similar work,including removing the debries to a distance not exc 50m, complete all as specified and directed.

Separating scraping and cleaning of reinforcement (demolition of concrete measure separately)

M&L for Pre-Cast RCC 1:2:4 nominal mix, type B1 using (20mm graded aggregad) as in cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed. Note :Reinforcement shall be measured and paid separately .

M&L TMT bars 6 to 8 mm dia bars cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia confirming to IS, complete all as specified and directed.

S&F of Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250).

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 finished even and sooth without using extra cement complete all as specified and as directed.

M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint over a coat of primer.

M&L for preparation of old surface consisting of scraping down cleaning of smoke spots, moulds, effloroscent salts etc and applying one coat of cement base paint complete all as specifed and directed

Dismantling fencing, wire mesh any type complete all as specified and directed by Engr-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

M&L for cement concrete in foundation PCC 1:3:6 type C2 using 40mm graded stone aggregate for fencing post etc.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F in repair framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165

M&L preparation of old painted surfaces of steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old floor surfaces of paver block surfaces, concrete floor, concrete tiles surfaces and applying two coat of PU coated floor paint over one coat of primer complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75 mm thick sub base or similar items complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation. (Thickness of cushion should not be less than 25mm).

Dismantling/demolition of floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

M&L glazed vertified tiles (350 x 250 x 7mm or 450 x 300 x 7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L for granite slab (of any type) 20mm thick machine cut, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/counter platform tops including cutting and mirror polishing etc., complete all as specified and directed.

M&L for 80mm thick coloured rubburised, glossy finish colour machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade including complete all as specified and directed by Engineer-in Charge.

S&F Pre polished chequered cement concrete tiles glossy and rubburised finish colour 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in CM 1:6 under tiles including complete all as specified and directed by Engineer-in Charge.

M&L for PCC 1:3:6 type C-1, 75 mm thick as in plinth protection, path, floor construction joint after every 2 mtr interval and from wall will be filled by mastic of bitumin/compound grade 'A' complete all as specified and directed.

M& for forming contraction (Dummy) joints 75 mm deep x 10mm wide, filled with sealing compound complete all as specified and directed by Engr-in-Charge.

M & L providing precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in kerb stone of size 45cm x 10cm x 35cm and set in CM 1:4 complete all as specified.

M & L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

MANIYA CONSTRUCTION CO

VP DEVELOPERS AND CONTRACTOR

JP ENTERPRISES

V.R.PRAJAPATI AND CO.

A B S ENTERPRISES

M/S SANDEEP CONSTRUCTION COMPANY

bhardwaj enterprises