Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹10.8 L+₹62,027 (6.12%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹13.3 L+₹3.2 L (31.4%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
23 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Kapurthala
GE Kapurthala
Welcome maintenance and repair works for MD Accn buildings at Mil Stn Beas and Jandiala Guru under GE Kaurthala
2023_MES_577218_1
GE KPT- /2022-23
Open Tender
Civil Works
Item Rate
300 days
GE Kapurthala
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE Kapurthala
₹30,000
Yes
11 Apr 2023
25 Jan 2023
25 Feb 2023
25 Jan 2023
23 Feb 2023
9 Feb 2023
Amount
M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper after complete removal of existing finishes complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces of walls and applying one coats of oil bound distermper complete all as specified and directed by Engr-in-Charge.
M&L for preparation old decorated plastered surfaces of walls or cornices and applying one coats cement base paint after complete removal of existing complete all as specified and directed by Engr-in-Charge.
M&L for perparation of old decorated plastered surfaces of wall and cornices by complete removal of existing treatment by applying water and scapping of entire thickness and thereafter applying applying two coat of Interior emuslion paint (APEX) over a coat of appropriate primer complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old steel surfaces of any description over 10cm girth or width and otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces of ceiling and applying one coats of oil bound distermper after complete removal of existing treatment complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces or un plastered old decorated surfaces of wall by brooming down or steel scraping down smoke soot’s, moulds, moss and efflorescent salts, trading oil greasy spots etc. and applying one coat of white wash on wall complete all as specified and directed by Engr-in-Charge.
All as per item No.8 here in before but on ceiling complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water built in cement mortar, complete all as specified and as directed by the Engr-in-Charge.
M&L for rendering 15mm thick cement plaster in cement mortar (1:4) on any of brick work or concrete surfaces of walls finished fair and even without using extra cement complete all as specified and as directed by the Engr-in-Charge.
M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on any of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge.
M&L for rendering 5 mm thick in cement mortar (1:3) on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge.
M&L for preparation of newly plastered ceiling surfaces and applying two coats of distemper oil emulsion over one coat of birla putty 1mm thick preparatory to distempering complete all as specified and directed by the Engr-in-Charge.
M&L for preparation of new plastered surfaces of walls etc. and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty preparatory to distemper complete all as specified and directed by the Engr-in-Charge.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed by the Engr-in-Charge.
M&L for preparation of new or old wooden or wood based surfaces of any description and girth, not otherwise described and applying/ treating with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engr-in-Charge.
Supply only integral water proofing compound conforming to IS-2645 complete all as specified and directed by the Engr-in-Charge. (Make: Dr. Fixit).
Demolition floor, hearth or wall tiling or stone slabs, laid, beded & pointed in any mortar including removing rubbish off the premises complete all as specified and directed by the Engr-in-Charge.
M&L for joint free coloured glazed ceramic tiles of size 450x350x7mm thick, as on vertical surfaces such as dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including backing coat 10mm thick cement mortar (1:4) complete all as specified and directed by the Engr-in-Charge.
M&L for joint free non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, over and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by the Engr-in-Charge.
M&L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.42sqm but not exceeding 1.00sqm, in floors etc, over and including 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by the Engr-in-Charge.
M&L for granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick bedding layer in CM 1:6 complete all as specified and directed by the Engr-in-Charge.
M&L for 100mm thick plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) as in sub base of floor complete all as specified and directed by the Engr-in-Charge.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by the Engr-in-Charge.
M&L for Machine pressed precast concrete interlocking paver block, 60mm thick, any shape and size, confirming to IS-15658-2006, M-35 Grade, with grey cement and no pigment complete all as specified and directed by the Engr-in-Charge.
M&L for Chequred cement concrete tiles 20cmx20cm & 25mm thick with grey cement and pigments, set jointed and pointed in grey cement slurry and pigments in floors laid over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed by the Engr-in-Charge.
M&L for PCC type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) as in parapets walls, benching, coping and filling at junction of brickwork and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete including use of forwork (straight or curved) complete all as specified and directed by the Engr-in-Charge.
Taking down rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks, etc. removal from site (measured overall as fixed along the centre line or fittings and accessories) complete all as specified and directed by the Engr-in-Charge.
S&F PVC rain water pipes (SWR) 110mm dia(Single socketed, in any length with rubber joints, fixed to walls with flat iron clamps complete all as specified and directed by the Engr-in-Charge.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 duly cuting, welding bending & fixing complete all as specified and directed by the Engr-in-Charge.
Taking up or down, steel tubing 15mm bore and connections and removal from site complete all as specified and directed by the Engr-in-Charge.
S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by the Engr-in-Charge.
Taking up or down, steel tubing 20mm bore and connections and removal from site complete all as specified and directed by the Engr-in-Charge.
S&F 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by the Engr-in-Charge.
Taking down Chowkat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) and removing from site complete all as specified and directed by the Engr-in-Charge.
Taking down Chowkat or frames exceeding 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frames) and removing from site complete all as specified and directed by the Engr-in-Charge.
Taking down shutters of any description n.exc 1 Sqm each and refixing in same opening complete all as specified and directed by the Engr-in-Charge.
Taking down shutters of any description exc 1 Sqm and n.exc. 2 Sqm each and refixing in same opening complete all as specified and directed by the Engr-in-Charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed by the Engr-in-Charge.
S&F rolled mild steel Fe 410-W (Gde-E-250) quality-A in Joist, door frame, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) complete all as specified and directed by the Engr-in-Charge.
S&F 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by the Engr-in-Charge.
S&F 35mm thick second class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 complete all as specified and directed by the Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top, lock and bottom railson either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in MS frames welded/sealed to the styles and rail with suitable PVC sheet /sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed by the Engr-in-Charge.
S&FSteel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No. CEJZ/TD-7/07 sheet 1/3 of 3/3. Note : Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by the Engr-in-Charge.
S&F Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by the Engr-in-Charge.
S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and directed by the Engr-in-Charge.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and directed by the Engr-in-Charge.
S&F 100mm size butt hinges, medium weight, cold rolled mild steel & fixed complete all as specified and directed by the Engr-in-Charge.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed by the Engr-in-Charge.
S&F 300mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by the Engr-in-Charge.
S&F floor door stopper of overall length of cover plate 140mm aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed by the Engr-in-Charge.
S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by the Engr-in-Charge.
S&F aluminium door with chowkhat of section 80mm x 40mmof wall thickness 1.58 and bottom rail 160 x 40mm of wall tick ness 1.58mm including glazing with 5.5mm thick sheet glass incl fittings such as aluminium tower bolt-1 No, handle-2 Nos, glazing pins, clips, beading and hydraulic door closure regulated designated 3 universal type complete all as specified and directed by Engineer-in-Charge. The shutter frame shall be tied at top (internally) with screw of round bar 10mm dia complete all as specified and directed by the Engr-in-Charge.
S&F aluminium window chowkat of 89x 32mm with wall thickness 2.75 ( weight 1.81 kg/RM) incl double shutter of section 50 x 35 with wall thickness 1.5 incl including double shutter( glazed and gauzed shutter) incl 5.5 mm thick glass tinted, wire cloth 0.45 mm nominal dia of wire cloth and average width of aperture 1.25 mm including aluminium grills, fitting such as aluminium tower bolt, handles and complete all as specified and directed by the Engr-in-Charge.
S&F in repairs; 15mm bore PVC connection and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed by the Engr-in-Charge.
S&F in repair; Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed by the Engr-in-Charge.
S&F brass CP central hole, cast copper alloy (ISI Marked) fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstan head screwed both ends basin mixer with copper pipe complete all as specified and directed by the Engr-in-Charge.
S&F in repair 3 in 1 wall mixer telephonic type chromium plated with CP wall flange, 1.5 Meter Long Easy Flex Tube in Chrome Finish and Hand shower complete all as specified and directed by the Engr-in-Charge.
S&F in repair; 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed by the Engr-in-Charge.
S&F 15mm bore bib tap with wall flange, cast copper alloy, chromium plated and screwed to iron pipes or union fittings complete all as specified and directed by the Engr-in-Charge.
S&F in repair for fancy type chromium plated stop valves, cast (angle cock) copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for bore of size 15mm complete all as specified and directed by the Engr-in-Charge.
S&F in repair 15mm bore chromium plated two way stop valves cast copper alloy screwed down high pressure with with crutch or but-terfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed by the Engr-in-Charge.
S&F in repairs shower rose of chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia complete all as specified and directed by the Engr-in-Charge.
Disconnecting existing tanks, setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clear water and cleaning of mouths of circulating pipes of capacity of tank exceeding 250 litre but not exceeding 500 litre including writing date of cleaned outer body of the tank with 100mm high by synthetic enamel paint (white/black colour) and reconnecting and refixing in position complete all as specified and directed by the Engr-in-Charge.
S&F steel plate rack made of stainless steel sheet 1mm thick over all size 900mmx750mm complete all as specified and directed by the Engr-in-Charge.
S&F Stop valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed but fancy type, Chromium Plated with long shank and cup (concealed type) etc ccomplete all as specified and directed by the Engr-in-Charge.
S&F 15mm bore chromium plated stop valves/angular valve, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed by the Engr-in-Charge.
S&F Vitreous China Ware Wash hand basin white, flat back, size 210x580x460mm size with long padestal, 32mm dia stainless steel waste coupling & Ci Brackets including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by the Engr-in-Charge.
S&Fin repair vitreous china wash down water closet, "Orissa pattern, size, 680x470mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified and directed by the Engr-in-Charge.
S&F coloured Toilet paper holder CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by the Engr-in-Charge.
S&F in repair, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by the Engr-in-Charge.
Supply only liquid water proofing compound complete all as specified and directed by the Engr-in-Charge.
S&F, Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) with clamp complete all as specified and directed by the Engr-in-Charge.
S&F, soap dish, stainless steel approximate size 160x160x90mm fixed to wall with chromium plated brass screws fixed in repair complete all as specified and directed by the Engr-in-Charge.
S&F, sheet glass shelf (450mm long) assembly consisting of 8mm thick sheet glass shelf 15 cm wide with chromium plated bracket guard and railing fixed in repair complete all as specified and directed by the Engr-in-Charge.
S&F, corner glass shelf (300mm long) assembly consisting of 8mm thick sheet glass shelf with chromium plated bracket guard and railing fixed in repair complete all as specified and directed by the Engr-in-Charge.
S&F, 25mm dia steel curtain rod, powder coated having wall thickness 1mm with aluminium powder coated brackets , stops, rollers, curtain rings etc complete all as specified and directed by the Engr-in-Charge.
M&L for hacking out old broken glass (any thickness size quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones not exceeding 0.5 Sqm complete all as specified and directed by the Engr-in-Charge.
S&F 3 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed by the Engr-in-Charge.
S&F in repair 10 Litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes complete all as specified and directed by the Engr-in-Charge.
S&F in repair SDG Frameless Beveled Mirror for Bathrooms Wall and Home, 48x30 Inch (Silver) and 5mm thick looking mirror, Beveled Edge at 0.75 Inch Edge thickness 4mm, fitted to wooden plug with CP screws complete all as specified and directed by the Engr-in-Charge.
Disconnecting existing PVC water tanks, of 500 & 1000 Litre capacity setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clear water and cleaning of mouths of circulating pipes of capacity of tank exceeding 250 litre but not exceeding 500 litre including writing date of cleaned outer body of the tank with 100mm high by synthetic enamel paint (white/black colour) and reconnecting and refixing in position complete all as specified and directed by the Engr-in-Charge.
Supply, hoisting and fixing in position Rotational moulded Polyethylene water storage tank, 500 litres capacity conforming to IS-12701 (1989) cylindrical vertical type three-layered wall construction with closed top including inlet, outlet and wash out holes of approved make including taking down the old unserviceable water storage tank complete all as specified and directed by the Engr-in-Charge.
Supply, hoisting and fixing in position Rotational moulded Polyethylene water storage tank, 1000 litres capacity conforming to IS-12701 (1989) cylindrical vertical type three-layered wall construction with closed top including inlet, outlet and wash out holes of approved make including taking down the old unserviceable water storage tank complete all as specified and directed by the Engr-in-Charge.
S&F 20mm dia Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed by the Engr-in-Charge.
Cutting grooves in brick wall, 75mm wide and 65mm deep, including for inserting TMT bar as required length and shaping horizonatal/vertical face of groove making good where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good complete all as specified and directed by the Engr-in-Charge.
M&L for RCC 1:11/2:3 , type A-0, using 12.5 mm nominal size graded crushed stone aggregate as in chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed by the Engr-in-Charge.
S&F 10mm dia mild steel TMT bars as in reinforcement, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia or occuring with clips complete all as specified and directed by the Engr-in-Charge.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed by the Engr-in-Charge.
M&L for formwork to sides and soffits of beams chajjas and the like for rough finished surfaces of concrete complete all as specified and directed by the Engr-in-Charge.
S&F, 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) with PVC waste pipe for wash hand basin fixed in repair complete all as specified and directed by the Engr-in-Charge.
S&F, 40mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) for sink fixed in repair complete all as specified and directed by the Engr-in-Charge.
S&F aluminium (aluminium body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed by the Engr-in-Charge.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc 20 cm Girth complete all as specified and directed by the Engr-in-Charge.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by the Engr-in-Charge.
S&F in repair Coupled Closet WC colour, Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set. Size 380x660x765mm and Cistern with cistern fittings complete all as specified and directed by the Engr-in-Charge.
S&F in repair 25mm dia Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690gms) complete all as specified and directed by the Engr-in-Charge.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by the Engr-in-Charge.
Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc. complete all as specified and directed by the Engr-in-Charge.
S&F anodised aluminium snap grid of size 605 x 605mm in frame work for false ceiling complete all as specified and directed by the Engr-in-Charge.
Providing and fixing Gypsum Board 8mm thick of size (600x600)mm in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by the Engr-in-Charge. (frame work for ceiling shall be measured and paid separately).
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed by the Engr-in-Charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by the Engr-in-Charge.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed by the Engr-in-Charge.
-Ditto- all as per item No 106 above but except bricks etc complete all as specified and directed by the Engr-in-Charge.
G M BUILDERS 36
JOGRAJ CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .