REPAIR/MAINT OF WATER PIPE LINE AND OTHER CONNECTED WORKS OF CHARARI, JK AND NARENDRA GROUND AT AFS KANPUR

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling, in and including spreading levelling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil after pipes are laid and tested complete all as specified and directed.

Removing of excavated material not exceeding 50 m distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F in replacement of 150 mm bore non return valve both end flanged suitable for cast iron pipe including all fittings washer, nuts & bolt etc complete all as specified and directed. Make: Kirloskar / Upadhaya / Leader/ Zoloto / Sant

S&F in replacement of ISI Marked Gun metal Gate valve with iron wheel head, screwed both ends for iron pipe of the size 15 mm bore complete all as specified and directed. Make: Kirloskar / Upadhaya / Leader/ Zoloto / Sant

All as per item no. 5.00 above but 20 mm Bore.

All as per item no. 5.00 above but 25 mm Bore.

All as per item no. 5.00 above but 40 mm Bore.

All as per item no. 5.00 above but 50 mm Bore.

S&F in replacement bib tap 15 mm size standard of PTMT any colour high pressure screwed for iron pipes complete all as specified and directed. Make: Prayag / Polytuff

S&F in replacement of float valve (ball valves) high pressure of PTMT with epoxy coated alluminium rod & high density plastic ball screwed for iron pipe of the Size 20 mm bore complete all as specified and directed. Make: Prayag / Shakti Enterprises / Polytuff

Taking up or down 15 mm bore steel water tubing and connections including cleaning for re-fixing or removal complete all as specified and directed. Note:- Excavation, returning, filling shall be measured and paid separately under respective item of schedule 'A'/BOQ.

All as per item no. 12.00 above but 20 mm bore.

All as per item no. 12.00 above but 25 mm bore.

All as per item no. 12.00 above but 40 mm bore.

All as per item no. 12.00 above but 50 mm bore.

Re-fixing old steel tubing 15 mm bore obtained from above and connection in new or old position in trenches/wall/ ceiling/ floors etc with using all new fittings complete including making good the disturbed portion complete all as specified and directed.

All as per item no. 17.00 above but 20 mm bore.

All as per item no. 17.00 above but 25 mm bore.

All as per item no. 17.00 above but 40 mm bore.

All as per item no. 17.00 above but 50 mm bore.

Supply, laying, jointing and leakage testing GI Pipe 15 mm bore medium grade including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches / floor/ walls etc complete all as specified and directed. Notes: (i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a particular quarter, building block or a group of blocks. (ii) Excavation & earth work shall be measured & paid seperately under respective item of BOQ. Make: Jindal / Tata / Zenith / Prakash Surya

All as per item no. 22.00 above but 20 mm bore.

All as per item no. 22.00 above but 25 mm bore.

All as per item no. 22.00 above but 40 mm bore.

All as per item no. 22.00 above but 50 mm bore.

S&F in replacement sluice valves 200 mm dia class PN-1.0, IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as specified and directed. Make: Kirloskar / Upadhaya

All as per item no 27.00 above but 150 mm dia.

All as per item no 27.00 above but 100 mm dia.

M&L in replacement of run lead joint for 100 mm bore CI Spigot and socket pipes and fittings complete all as specified and directed.

All as per item no 30.00 above but 150 mm bore.

M&L for painting of steel and iron surfaces of any description exceeding 10 cm width or girth such as pipe lines, angle iron & flat surfaces of any description with two coat of synthetic enamel paint including preparation old painted surfaces complete all as specified and directed.

Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing PCC 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars complete all as specified and directed.

Attending of day to day complaints of water supply of all nature i.e. leakage in water GI pipe lines, fittings / fixture, no water supply including all type of complaint noted in complaint register all complaints slips received from the complaint cell and deposit the complaint slip after reactification and obtained signature of users with necessary T&P with experianced one pipe fitter and one helper and GI fittings i.e. elbow, tee, reducer, union, long screw socket, nipple, plug etc including necessary excavation, returning filling work complete all as specified and directed. Note: The complaint shall be attended and defect shall be rectified with in 04 hrs commencing from the date and time of notifying the complaint failing which a penalty @ Rs 600.00 per complaint per day shall be recovered from Bill.

M&L for centrifugally cast (spun) ductile iron pressure pipes 100 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed. Make: Electro steel / Jindal / Tata / Jai Balaji Note:- Rubber gasket joint will be measured and paid seperately under respective item of BOQ.

M&L for centrifugally cast (spun) ductile iron pressure pipes 150 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed. Make: Electro steel / Jindal / Tata / Jai Balaji Note:- Rubber gasket joint will be measured and paid seperately under respective item of BOQ.

Taking up cast iron water mains including all fittings with spigot and socketed ends and lead joints including burning out joints and recovering lead of the size 100 mm bore complete all as specified and directed.

Taking up cast iron water mains including all fittings with spigot and socketed ends and lead joints including burning out joints and recovering lead of the size 150 mm bore complete all as specified and directed.

M&L in replacement of rubber gasket joint of the size 100 mm size for CI/DI flanged type pipe including nut, bolt, washer complete all as specified and directed.

M&L in replacement of rubber gasket joint of the size 150 mm size for CI/DI flanged type pipe including nut, bolt, washer complete all as specified and directed.

M&L in replacement for CI/DI fittings such as bends, collars, caps, plugs, connecting pieces any type upto 150mm dia complete all as specified and directed.

M&L in replacement for cast iron detachable joints (D Joint), suitable for CI pipe line 100mm dia complte with full thread 12mm dia nut and bolts and washers including two Nos rubber rings complete all as specified and directed.

M&L in replacement for cast iron detachable joints (D Joint) suitable for CI pipe line 150mm dia complete with full thread 12mm dia nut and bolts and washers including two Nos rubber rings complete all as specified and directed.

M&L for construction of valve chamber (in replacement) 1000 x 1000 x 1000 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:4), 230 mm thick, PCC bed (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) 150 mm thick, cement plastering, finishing 15 mm thick in cement mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L for construction of valve chamber (in replacement) 1200 x 1200 x 1200 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:4), 230 mm thick, PCC bed (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) 150 mm thick, cement plastering, finishing 15 mm thick in cement mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L for construction of valve chamber (in replacement) 900x900x900 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:4), 230 mm thick, PCC bed (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L for construction of valve chamber (in replacement) 600x600x600 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in cement mortar (1:4), 230 mm thick, PCC bed (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) 150 mm thick, cement plastering, finishing 15 mm thick in cement mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L in replacement of flat iron clamp 50 mm x 6 mm welded with 20 mm GI socket including necessary nut and bolts for the Size 100 mm bore complete all as specified and directed.

All as per item no. 49.00 above but 150 mm bore.

M&L overhauling of sluice valve and replacement of minor items such as spindle, plares, nut bolt if required at site of size 150/100mm complete all as specified and directed.

Supply,Laying, jointing and leakage testing of 'C' PVC Pipe including supply and fixing of all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches / floor/ walls etc all as specified and as directed at site of the following sizes (a) 20 mm dia :- Notes : (i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a purticulular building.Make-Prince /Finolex /Supreme.

All as per item No 52 above but, 25 mm dia

S&F 'U' PVC ball valve for 'U' PVC pipe of the following size 20 mm bore.

All as per item No 55 above but, 25 mm Bore

M&Lfor fixing in replacement ventuary/ orific arrangment made out of MS pipe 150 mm bore 7.0 mm thick 0.50mtr long(appx) including welding of flange at both end and five Nos. socket of 20 mm bore with fixing of nipple and gate valve of size 20 mm bore and one No. reducer of size 50 x 20 mm complete all as directed by Enginner in charge.

Supply and replacement of Bib tap 15 mm size ISI marked standard of brass type high pressure screwed for iron pipes and fixed. Make Prayag /L&T/symet

M/L for structure work fabricated from structural , steel section including nut,bolts,washers including cutting/ welding in any position, any shape and drilling hole for bolts in any size and shape as per site requirement or directed and inclusive of one primer coat of red oxide and one finish coat of synthetic enamel black paint complete all as per specified and directed.

Supply and replacement of butter fly valve of size 100 mm bore ISI marked heavy duty including suitable nut,bolt & washer complete. Make- Sant /leader/Zoloto

M&L for rewinding of Booster pump for 440V, 3 phase 50 HZ confirming to IS-12469 1988 with CI casing,bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440V,3 phase,50 HZ 31 mtr head,1500 LPM discharge complete all as specified and directed.

KAMAL TRADING CO.

BRIGHT TRADRES

Lalta Prasad vijay kumar Forwarding Agency