SPECIAL REPAIR GUST ROOM OF BLDG NO T 10 AT HELIPAD OF 261 CEDU P31 AT A COY EX 5017 ASC BN MT CARE 313 COY ASC AND PROVN OF CURTAIN RODS IN OTM ACCN OF 21 BIHAR AND OLD ROOM SHEET OF CERTAIN BLDG AT 413 PET PL UNDER GE NARANGI

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridgs complete all as specified and directed.

Material and labour for Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed.

Material and labour for Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick (Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board ) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and directed.

Supply and fix in repairs E-board Make: Everest, Design "Lake and Hill" or equivalent of size 605 x 605 x 4mm thick white prelaminated set embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (White powder coated). The framework shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32x x300mm and soaced at 1200mm maximum centres securely fixed to structural soffits with hangers of 1.60mm dia GI wire to be fixed with approved rawl plugs, adjusters and screws. Flush fitting of 1200mmm long cross Tee (with double stiching) to be interlocked between main runners at 600mm centre to form 1200 x 1600 mm modules cross tee longer than 600mm to be supported independently. 600 x 600mm doubles to be formed by fittings 600mm long cross tee centrally between the 1200mm cross tee. Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19 x 19 mm and 300mm long of white colour all as per manufacturers instructions all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fix rolled Mild steel sections of Fe-410-W(Gde-E-250) quality-B as in roof trusses (framed) trussed, purlins, rafters, posts, crane gantries, rails and fastening of eaves board or weather board and heavy bracket framing (Beam,tee, anfle, channel, MS pipe or flat sections) including distance pieces cleats etc complete all as specified and as directed.

Supply and fix mild steel work in wind tie made out of flat iron 40mmX4 mm including cutting, drilling, boalting and welding etc complete conforming to Fe 290 grade E 165 complete all as specified and as directed.

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IIS-4923 etc complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. (Fe-410W(GdeE-250) quality B complete all as specified and as directed.

Dismantling of fencing, wire mesh of any type and in any position by unscrewing nuts fillets, clamps complete all as specified and as directed.

Dismantling posts or strut (Wood, steel or RCC fencing posts) any section and taking out embedded portion (post embedded in concrete) including making good to disturbed ground surfaces complete all as specified and as directed.

Supply and fix in repairs for galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2.00 mm dia, barbs at 75mm spacings and straining, tightening and fixing to MS nibs embedded in pre-cast RCC fencing post or angle iron post, struts, etc. securing and tying at crossings with and provision of galvanized mild steel wire complete all as specified and as directed. Note: Each line wire to be measured separately.

Supply and fix hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and as directed.

Supply only 3.15mm dia galvanized steel wire chain link fencing 75 mm x 75 mm mesh, including binding wire / line wire etc complete all as specified and as directed.

Fixing only, galvanized steel wire chain link fencing 75 mm x 75 mm mesh, fixed to fencing post with bolts etc including fixing of binding wire / line wire etc complete all as specified and directed. Note :- (a) Supply of Galvanized steel wire chain link fecncing, Mild steel round bars, Mild steel flat, Nuts, Bolts & Washers will be measured and paid separately.

Supply and fix mild steel bolts (machine made) with hexagonal head at one end and screwed the other end, each screw end to be fitted with two washers and one nut hexagonal, dia of shank 11 to 15 mm, length of bolt 50 mm to 100 mm complete all as specified and as directed.

Supply only 10 mm dia mild steel round bars as in stiffener to chain link fencing including necessary cutting bedding etc. conforming to Grade-I, IS 432 (Part-I) complete all as specified and as directed.

Demolition of Brick work including all quains and arches pillars etc built in cement mortar complete all as specified and directed.

Material and labour for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 and complete all as specified and directed.

Material and labour brickwork with sub class 'B' bricks straight or curve on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed.

All as item No 23 above but except bricks complete all as specified and directed.

Material and labour for Cutting holes in brick walls built in CM excd half brick but n.exc one brick for inserting hold fasts & making good dismantled portion in CM 1:3 or PCC 1:2:4 type B-1 and finishing to match the existing finish complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Materials and labour for 10 mm thick rendering in cement mortar 1:6 on brick/ concrete surfaces and finishing the surfaces even and fair etc complete all as specified and as directed

Material and labour for rendering 15mm thick external in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using WPC @2% by the wt of cement complete all as specified and as directed

Material and labour for preparation of newly plastered surfaces of wall applying a coat of 1mm thick wall care putty and applying two coats of acrylic distemper over a coat of alkali resistance primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of acrylic distemper over a coat of primer complete all as specified and directed.

Complete scrapping of old decorated surface of wall and applying one coat of alkali resistant primer ,sanding the surfaces till smooth finish is obtained and finally applying two coats of acrylic distemper etc over 1mm thick wall care putty complete all as specified and directed.

Complete removal of existing treatment on walls or previously untreated surface and applying one coat of alkali resistant primer ,sanding the surfaces till smooth finish is obtained and finally applying two coats of cement based paint etc complete all as specified and directed.

Material and labour for Preparation of new or old plastered surface of wall etc and Finishing walls with Premium Acrylic Smooth exterior paint (Apex Ultima) with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over 1.00 mm thick external wall care putty complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistance primer etc complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel or iron surfaces, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of steel or iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Materials and labour for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames but n exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Supply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

Supply and fix steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Supply and fix factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with out sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

Supply and fix powder coated Alumnium section (Thickness of powder coating 50 micron), Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 4 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter:- (A) Sections for shutter (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick (B) Section for frame (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM complete all as specified and directed . Note:- 1. Two nos slide for glass and one no slide for wire cloth.

Anodized aluminium push pull type partly paneled and partly glazed door shutter (single leaf / double leaf) having top rail of section 85.00mmx44.45mmx2.00mm, bottom rail of section 85.00mmx44.45mmx2.00mm thick, door verticals of section 44.45mmx44.45mmx2.00mm thick and lock rail of section 85.00mmx44.45mmx2.00mm thick with aluminium anodized chowkats of section 63.50mmx33.10mmx2.50mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc. including 12mm thick pre laminated particle board, interior grade pre laminated with decorative face laminations both sides on bottom panel and 5.5 mm thick float glass tinted quality on top panel and including aluminium door closer fixed to the door complete all as specified and as directed.

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm(+ - 0.2 mm). Window profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + - 0.2mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated ),steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories .(Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.)Area n exc 2.00 Sqm Each

Supply and fix aluminium, anodised, barrel tower bolts of extruded section, 150mm long and fixed all as specified and directed.

Supply and fix of aluminium handles, cast type anodised of 150 mm long complete all as specified and as directed.

Supply and fix aluminium alloy. anodised, sliding door bolt of 300 mm size with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fix butt hinges, medium weight, cold rolled mild steel of 100 mm long complete all as specified and as directed.

Material and labour for 5.5 mm thick sheet glass ordinary quality and glazing with aluminium beading n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix in repairs 2nd class hardwood Weather boarding, wrought, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.

Demolition of concrete in ground floors and pavings exc 15 cm thickness but above ground floors also removing the debris to the out side of MD land complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of pressed steel chowkat etc complete all as specified and as directed

Material and labour for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in hold fast block, including form work complete all as specified and as directed

Material and labour for PCC(1:3:6) type C1 using 20 mm graded stone aggregate as in coping with & including necessary formwork complete all as in specified and as directed.

Material and labour for PCC.1:3:6 type C- 1 (20mm graded stone aggregate ) as in surface channel , drain and culvert complete all as specified and directed.

Material and labour for 100 mm thick plain cement concrete (1:4:8) type D2 using (40 mm graded crushed stone aggregate) as in sub base of tiles/floor of hard standing/path etc complete all as specified and directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc all as specified and as directed. (Note: Only inner girth to be measured)

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and as directed

Material and labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface over 15mm thick screed bed cement mortar (1:6) complete all as specified and as directed

Material and labour for coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match existing surfaces over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Dismantling of stone slabs and tiles of and any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .

Material and labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base 20 mm in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete mixed with pigment to match the shade of the slab including rubbing and polishing complete

Material and labour for machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with including 10mm thick rendering in CM 1:3 etc set and jointed in neat cement slurry

Material and labour for 60mm thick M-35 grade cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as directed.

Material and labour for sand cushioning over sub Base incl Spreading and levelling in layers n exe 25 cm complete all as specified and directed

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fix steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fix steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fix 1000 litres capacity rotational moulded polye-thylene water storage tanks triple layer ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including 20 mm bore dia -ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc. including dismantling old water tank complete all as specified and as directed..

Supply and fix 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed..

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed..

Supply and fix 15mm bore fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc complete all as specified and as directed..

Supply and fix in repair PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screw complete all as specified and as directed..

Supply and fixing in repair vitreous china one peice water closet of size 300x730x740mm mm and making necessary connection to drain or out going pipe fixed on floor complete all as specified & directed. (Make : Jaquar cat No SLS WHT 6851S300PP or as equivalent)

Supply and fix in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

Supply and fix repairs 15mm bore bib taps with wall flange chromium plated screwed down for galvanised iron pipes complete all as specified and as directed.

Supply and fix in repairs 15mm bore bib taps two way with wall flange chromium plated screwed down for galvanised iron pipes complete all as specified and as directed.

Supply and fix in repair 15 mm dia bore Brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs 15mm bore angle stop cock with wall flange chromium plated screwed down for galvanised iron pipes complete all as specified and as directed.

Supply and fix in repair 15 mm dai bore chromium plated health foucet 1.20 Mr long flexible pipe complete all as specified and as directed.

Supply and fix in repair chromium plated swivel shower rose of 125 mm dia and suitable for fixing 15 mm bore iron pipe all as specified and directed.

Supply and fix in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.

Supply and fix in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120mm wide with & 600 mm long chromium plated bracket guard nad railing fixed with steel screws on wall complete all as specified and as directed.

Supply and fix glass corner shelf with 3 piece set chromium plated railing complete all as specified and directed.

Supply and fix toilet paper holder of vitreous china fixed to walls with chromium plated brass screws complete all as specified and as directed.

Supply and fix in repairs, 25 mm dia stainless steel drapery rods for curtains incl stainless steel decorative end doms and SS brackets (wall to wall or flush to wall) for securing curtain rod,complete all as specified and as directed.

Supply and fix Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including of any description, complete all as specified and as directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

Supply and fix in repairs kitchen plate rack made of stainless steel sheet not less than 0.63 mm thick of over all size 600 mm x 900 mm x 250 mm complete all as specified and as directed.

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody complete all as specified and directed.

Material and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item serial No 101 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and directed.

All as per item serial No 101 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and directed.

All as per item No 101 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed.

All as per item serial No 101 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable.

Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and directed.

Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed.

Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix in repair Buzzer, Ding Dong AC. 230 volts,single pole complete all as directed.

Supply and fix in repair modular Bell push switch, 5 Amps 230 volt complete all as directed.

Supply and fix stepped type modular electronic fan regulator, two module size, flush type complete all as specified and as directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

Supply and fix modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as directed.

Supply and fix in repair modular white cover plate with frame, 2 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 4 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 6 module complete all as specified and as directed.

Supply and fix in repair modular white cover plate with frame, 8 module complete all as specified and as directed.

Supply and fix in repair metal flush box 4 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 6 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 8 module for modular switches complete all as specified and as directed.

Supply and fix in repair metal flush box 1/2 module for modular switches complete all as specified and as directed.

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair wall decorative fixtures in durable body and designer mesh in gold finish suitable for 9W LED lamp of B22, including lamp of 9watt complete all as specified and as directed.

Supply & fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix in repair for factory made, sheet steel distribution boards, TPN, 4 Way, IP-43 double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed.

Supply & fix in repair/replacement MCB DB of sheet metal enclosure double door SPN 8 way IP -43 with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix in repair/replacement MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed.

Supply and fix in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Supply and fix in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,B-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Supply and fix in repair/replacement MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

Supply and fix in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and as directed.

Supply and fixing in repair building secruity light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Material and labour for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypower Fero Glas caoting Technology for inner container and Heavy Duty seamless Incoloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warrenty on product and 5 years warranty on inner container.complete all as specified and as directed.

Supply and lay GI tubing 40 mm bore light grade for cable protection and fixing to the existing pole with flat iron clamp 25x 3mm including nut bolts complete all as specified and as directed.

Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Material and labour for for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, panning completed all as specified and directed. Note:Punned thickness will be measured and paid.

Supply and laying well burnt sub class ‘B’ bricks locally available best quality laid dry in trenches for protection of underground cable, laid flat with length of brick perpendicular to length of cable completed all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing of excavated soil not exc 50cm & depositing where as directed at a level n.exc 1.5m above starting point complete all as specified and directed.

M/S MANOJ PAUL (BID ID -3408528)

R S TRADERS (BID ID -3416208)

M.P.SUPPLY (BID ID -3409286)