REPAIR TO TOILETS BATHROOMS, SANITARY FITTINGS AND OTHER CONNECTED B/R WORKS INCL PVC DOOR OF MARRIED AND OTM ACCN AT MIL STN DAGSHAI UNDER GE KASAULI

Schedule 'A' Section - I

Material and labour for Glazed ceramic coloured tiles 450X300X7mm thick,laid in vertical surfaces, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles laid over 10 mm thick rendering in cement mortar 1:4 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed.

Material and labour for non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles laid over 15mm thick screed bed in cement mortar 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) of any description n.exe 1.5 Sqm each including iron mongries complete all as specified and as directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) of any description exe 1.5 Sqm but n exc 4 sqm each including iron mongries complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and n exc 2 sqm each including iron mongries complete all as specified and directed

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed Note : Rates are included for providing and fixing M.S. hold fast/ lugs or SS dash fasteners.

Supply and fixing 35mm thick factory made plain framed, panelled shutter (two/one panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed.

Supply and fixing 35 mm thick factory made 2nd class hard wood partly or fully glazed and skelton shutter (Single or double leaf) open rebated and prepared to receive glass ,gauge etc divided into squares with plain, chamfered or rounded, mitred beads, rebated sash bars any numbers for securing glass, etc or partly with panels of 9mm BWP commercial ply etc with size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a) including two coats of synthetic enamel paint over a coat of primer after fixing to chowkats etc complete all as specified and as directed.

Material and labour 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints including two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and as directed Note : Rates are included for providing and fixing M.S. hold fast/ lugs or SS dash fasteners.

Supply and fixing anodised aluminium powder coated of approved colour (Thickness or powder coating not less than 50 micron) frame for doors, windows, ventilators, partitions incl necessary joining cleats, rubber packing, snap beading, glazing clips for fixing glass etc with one or more rebates and steel screw for fixing frame to walls/jambs etc. complete all as specified and directed.

Per X Square Metre

Supply and fixing anodised aluminium powder coated of approved colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified

Supply and fixing anodised aluminium powder coated (Thickness or powder coating not less than 50 micron of approved colour) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc. complete all as specified and directed.

Supply and fixing 9mm thick pre-laminated particle board exterior grade, both side laminations of approved colour and pattern fixed to wooden / aluminium frame work as in partitions, doors etc including necssary fittings etc complete all as specified and as directed.

Supply and fixing in repairs for 18mm/19mm thick plywood, grade BWP, type BB with 0.9mm thick decorative choice lamination on both sides of approved colour and pattern fixed to aluminium frame work as in door/partitions or fixed with screws for cupboard shutter and similar work etc complete all as specified and as directed.

Material and labour for PVC edge strip of 18/19 mm wide, colour and pattern as approved fixed with adhesive as per specified and as directed

Supply and fixing in repairs stainless steel 100mm long handles 'D' type (Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised bright finish width of flaps (when open) 30 mm complete all as specified and as directed.

Supply and fixing in repairs stainless steel hasp & staple 100mm inluding bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing in repairs fancy type decorated stainless steel curtain hanging rails/rods of 25mm dia inlcuding adjustable SS brackets and SS decorative end caps or finials for each window and door etc complete all as specified and directed

Supply and fixing stainless steel 100 mm long butt hinges medium weight and fixed with stainless steel screws complete all as specified and directed.

Supply and fixing stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing stainless steel 150mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing stainless steel 150mm long handles 'D' type (Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing stainless steel 200mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed

Supply and fixing stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed

Supply and fixing in repairs stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing in repairs stainless steel 150mm long handles(Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed.

Supply and fixing in repairs stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed

Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring over all length of cover plate 150mm complete all as specified and directed.

Supply and fixing in repairs mild steel 375mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size complete all as specified and as directed.

Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size complete all as specified and as directed.

Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed.

Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nails including 2nd class hardwood fillets/ Beads, straight (any size) for gauzed joinery complete all as specified and directed.

Supply and fixing in repairs for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nails including 2nd class hardwood fillets/ Beads, straight (any size) for gauzed joinery, renewed, including mitres including fixing with nails etc and removing old beads complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed.

Material and labour for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top and threaded cover/lid) hoisted and fixed in position including fixing ball brass float valves high pressure with high density float and flynut for 20mm bore dia of pipe, unions, tank adoptor etc complete all as specified & directed.

Material and labour for rotational moulded polyethylene water storage tanks 1000 Ltr capacity (cylinderical vertical with closed top and threaded cover/lid) hoisted and fixed in position including fixing ball brass float valves high pressure with high density float and flynut for 20mm bore dia of pipe, unions, tank adoptor etc complete all as specified & directed.

Supply and fixing in repair ball brass float valves high pressure, with high density polythene float and flynut for 20mm bore dia of pipe complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (minimum weight of brass ball valve - 0.45 Kg exclusive of floats)

Supply and fixing in repair 15mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed.

Supply and fixing in repair 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed.

Material and labour for 15mm bore GI tubing (medium grade) with all fittings (elbows, Tee, sockets, union, plugs, reducers etc) and fixed complete to walls, ceiling or laid in floors/roofs etc including taking up or down steel tubing and connections upto 15mm dia etc complete all as specified and as directed.

Material and labour for 20mm bore GI tubing (medium grade) with all fittings (elbows, Tee, sockets, union, plugs, reducers etc) and fixed complete to walls, ceiling or laid in floors/roofs.etc including taking up or down steel tubing and connection upto 20mm dia complete all as specified and as directed.

Material and labour for Cutting chases, pinning in stone or brick walls/ concrete block/ slab and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and as directed.

Material and labour for brick work with sub class `B` bricks built in CM 1:4 as in inspection chambers, manholes, septic tanks etc including demolition of brickwork or stone masonary, built in cement mortar and disposing off the rubbish materials etc out of MoD land and connecting to existing inlet and outlet sewer pipes complete all as specified and

as directed.

Material and labour for PCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in benchings, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

Supply and fixing powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Material and labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete etc including demolition of cement concrete (unreinforced) as in ground floors, pavings, manholes/ septic tanks foundations etc in patches at different locations and disposing off the rubbish materials out of MoD land complete all as specified and as directed.

Supply and fixing for cast iron work grade FG 150, unmatched, in brackets, gully traps, grating, railing, frames, manhole covers and frame double seal type etc including setting in cement mortar 1:3 and flaunching with cement concrete 1:2:4 type B1 light duty any type and size , including dismantling or demolition of old manholes cover, gratings, gully traps etc and removing of debris out of MoD land complete all as specified and directed

Supply and fixing anodised aluminium powder coated of approved colour (Thickness or powder coating not less than 50 micron) win

Supply and fixing in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with plugs, washers, CP waste coupling and PVC waste pipe ; including bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe etc complete all as specified and directed.

Supply and fixing in repair 15 mm dia bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and as directed.

Supply and fixing in repair 15 mm dia bib taps long body cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and as directed.

Supply and fixing in repair 15 mm dia pillar taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down high pressure, with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

Supply and fixing 15 mm dia long body/ swan neck wash hand basin, kitchen sink mixer, cast brass, chromium plated for mixing hot & cold water screwed down for iron pipe alonwith necessary fitting accessories making good to existing wall surface complete all as specified and directed.

Supply and fixing 15 mm dia wall mixer, cast brass, chromium plated for mixing hot & cold water screwed down for iron pipe alonwith necessary fitting accessories complete and making good to existing wall surfaces etc complete all as specified and directed.

Supply and fixing in repairs for PVC connector 15mm bore with brass chromium plated/ stainless steel nuts of min length 450mm etc complete all as specified and as directed.

Supply and fixing in repairs for 15mm bore pipe (heavy duty) with stainless steel braided outer tube and EPDM inner tube for hot water with brass chromium plated /stainless steel nuts of min length 450mm including etc complete all as specified and as directed.

Supply and fixing in repairs for Vitreous China wash hand basin white with full pedastal flat back size 630x450 mm, including fixing brackets and PVC waste pipe with coupling, cutting for and pinning in ends of brackets or errecting stand complete all as specified and as directed.

Supply and fixing for vitreous china counter wash hand basin, size 630 x 450 x 290mm, snow white with provision of overflow and tap hole including fixing brackets and waste pipe with coupling, cutting for and pinning in ends of brackets or errecting stand complete all as specified and as directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white fixed to floor with 75mm long 6.5mm dia counter sunk bolts embedded in concrete, with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device, stainless steel toilet seat/ commode jet spray with miniumum 1 mtr length flexible pipe and mild steel chromium plated or aluminised hinging device (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

Supply and fixing in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device etc complete all as specified and directed.

Supply and fixing in repair 75 mm dia PVC(SWR) pipes single/double socketed, in any length with rubber ring joints laid in trenches, floors or fixed to walls with MS clamps including necessary bends, T junctions etc as per site requirement and making good to existing wall/ floor surfaces complete all as specified and as directed.

Supply and fixing in repair 110 mm dia PVC(SWR) pipes single/double socketed, in any length with rubber ring joints laid in trenches trenches, floors or fixed to walls with MS clamps including necessary bends, T junctions etc as per site requirement and making good to existing wall/ floor surfaces complete all as specified and as directed.

Supply and fixing in repairs 110mm dia PVC(SWR) vent cowl etc complete all as specified and as directed.

Supply and fixing in repairs 75 mm dia PVC(SWR) floor/ nahani trap, with CP grating including jointing with solvent cement etc and making good to existing floor surfaces complete all as specified and as directed.

Supply and fixing toilet paper holder with flat recessed type stainless steel complete all as specifed and directed

Supply and fixing in repair for vitreous china squatting pan (Orrisa pattern), white, size 680 x 470mm with integral foot rest (excluding flushing cistern and flush pipe) embedded in cement concrete 1:5:10, connection to flushing pipe, anti- syphonage pipe including supplying and fixing 110mm PVC 'P' or 'S' Trap etc and connecting to outlet pipes complete all as specified and directed.

Supply and fixing in repair for 10 ltr capacity PVC valveless syphonic action type, flusing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed etc including PVC flushing pipe 32mm dia complete all as specified and as directed.

Supply and fixing in repair Flush pipe of polyethylene of low or high density of PVC 32mm dia for low level cistern including fixing to existing flushing cistern, Wash down water closet pan (Padestal or orrisa pattern) and making good to existing flooring etc complete all as specified and directed

Supply and fixing in repairs stainless steel half threaded waste coupling for wash basin 32mm nominal dia including all fittings etc complete all as specified and directed.

Supply and fixing in repairs stainless steel half threaded waste coupling for Kitchen sinks 50mm nominal dia including all fittings etc complete all as specified and directed.

Supply and fixing in repairs PVC flexible waste pipe for wash basins, kitchen sinks and urinals including PVC socket with threads for fixing with waste coupling etc complete all as specified and directed.

Supply and fixing in repairs Health faucet, cast brass alloy, chromium plated with gun, minimum 1mtr long easy flex tube, bracket wall mounted including making connections and fixed in position complete in all respect as specified.

Supply and fixing as in repair Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,

flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

Supply and fixing as in repairs Urinal spreader of copper alloy chromium plated for fixing with 15 mm dia pipe etc complete all as specified and directed.

Supply and fixing in repair for viterous china urinal partition white of size 310 x 700mm terminating about 40cm above floor line etc complete all as specified and directed

Supply and fixing in repairs of stainless steel grating doom 125 mm dia with or without waste hole as per site requirement etc and fixing with cement solvent complete all as specified and directed.

Supply and fixing in repairs of stainless steel grating doom 100 mm dia with or without waste hole as per site requirement etc and fixing with cement solvent complete all as specified and directed.

Supply and fixing in repair frameless rectangular 6mm silver looking mirror with smooth curved edges wall mounted of size 18 x 24 inches with pre-fitted steel star hooks complete all as specified and as directed

Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fixing in repairs Towel rail 20mm dia, 600mm long stainless steel 'D' type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

Supply and fixing Soap dish stainless steel fixed to plugs with screws etc complete all as specified and as directed.

Supply and fixing in repairs wall mounted corner shelf acrylic chrome finished set of min size 5x5", 7x7", 9x9" fixed to wall with screws etc complete all as specified and directed.

Supply and fixing in repairs stainless steel 'C' type 6 pin heavy duty cloth hanger fixed on walls or doors with screws etc complete all as specified and directed.

Material and labour for taking down cement plaster in patches on brick, stone or concrete surfaces as in walls, roof chimneys, chajjas etc at any height upto 15 mtr in any position or slope including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 20mm thick in CM (1:4) on stone or brick-work surfaces finished even and fair complete all as specified and as directed.

Material and labour for taking down cement plaster in patches on brick, stone or concrete surfaces as in walls etc at any height upto 10 mtr including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 20mm thick in CM (1:6) on stone or brick-work surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for taking down cement plaster in patches on brick or concrete surfaces etc at any height upto 15 mtr including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces as in chajja, ceilings etc finished even and smooth complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper of colour to match with existing shade, over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats applying two coats of Exterior emulsion paint (Weather coat) of colour approved by Engr - in- charge, over a coat of 2mm thick putty in two layers of 1mm each and including priming coat of exterior primer over new surfaces. etc complete all as specified and as directed.

Material and labour for complete removal by mechanical scrapping/sanding of all previously painted (OBD, Lime or Synthetic enamel paint etc) surfaces upto underlying wall plaster, washing and cleaning of all loose dust etc and applying two coats of oil bound distemper of colour approved by Engr-in-charge, over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed. Note : Rates are inclusive of filling holes and cracks upto 5mm with white cement before application of putty.

Material and labour complete removal of existing treatment by mechanical scrapping/ sanding of all previously painted (Apex, lime or synthetic enamel paint etc) surfaces upto underlying wall plaster, washing and cleaning of all loose dust etc and applying two coats of Exterior emulsion paint (Weather coat) of colour approved by Engr - in- charge, over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed. Note : Rates are inclusive of filling holes and cracks upto 5mm with white cement before application of putty.

Material and labour for preparation of old painted wooden surfaces of any description and applying two coats of synthetic enamel paint of approved tint etc complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description and applying two coats of synthetic enamel paint of approved tint etc complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc and removing debris/rubbish etc out of MoD land complete all as specified and directed.

Material and labour for 18-20 mm thick Granite (of any type) work ( table rubbed and polished) in steps, jambs, window cills, cooking platform, wash hand basin, urinal partition etc and like over 15 mm thick rendering/screed bed in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite to match the shade of the slab complete all as specified and directed.

Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, including making hole by drilling for gas pipe and other similar situations all as specified and directed

Material and labour for Chequered cement concrete tiles 30cmx 30cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:6 in floors, steps, risers with grey cement and pigments etc complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base floor and in foundation with necessary form work including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials out of MoD land ) complete all as specified and directed.