Providing M S grill and steel wire gauge on window of wards, renovation of kitchen, Dark room Fountain near garden and miscellanious work of Central hospital of Bishrampur Area.

Amount

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to steel windows by welding.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary fillings up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For shutter for door,window & ventilator including providing and fixing hinges/pivots and making provision for fittings wherever required. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.0 mm thickness.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make , in all coloursand shade, Fixing with cement based high polymer modified quick-set tile adhesive ( Water based ) conforming to IS 15477,in average 3 mm thick.complete : Size of tiles 600 x 600mm ( Double charge)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china pedastal type water closet ( European type WC pan ) with seat and lid, 10 litre low level white PVC, flushing cistern with manually controlled device ( handle lever ), conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever requidred: WC pan with ISI marked White solid plastic seat and lid.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20 mm dia

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make , in all coloursand shade, in skirting,riser of step over 12 mm thick bed of cement morter1:3 ( 1 cement :3 coarse sand ) including grouting the joints with white cement and matching pigments etc. complete : Size of tiles 600 x 600mm (Double charges )

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture,over the plasterd wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper ( ready mix ) having VOC content less than 50grams/litre of approved brand and manufacture to give an even shads : old work ( one or more coats) .

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand). Ordinary cement without any pigment

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal outer dia Pipes

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing aluminium sliding door bolts.ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 ) transparent or dyed to required colour or shade with nuts and screw etc.complete.250X16 MM

Providing and fixing aluminium tower bolt with necessary screws etc. complete : 200x10 mm

Providing and fixing aiuminium handle ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 ) transparent or dyed to required colour or shade with nuts and screw etc.complete..125 mm

Painting with synthetic enamal paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Providing and fixing 12 mm thick Nova pan , in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per directions of engineer-in-charge

Providing & fixing fly proof wire gauge to window,clerestory window & doors complete,stainless steel ( grade 304) wire gauge of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Providing & inatalation of Multi jet Fountain including 01 set of ( 01 Nozzles in center ) suitable for 10 feet dia tank pond size required 10 feet approx.,height of water effect 4 to 8 feet,nozzle made up of brass chrome plated with 3 numbers of 27 Watt led multi colour IP 68 fully waterproof, 01 no. of high power driver 7 controler for Led light with 7 colour and 10 different pattern,single phase MCB starter for pump,structure is made up withmachine made flange,wall etc. All water pipe line is of GI 7 resting structure is also of M S pipe, complete structure is coated with duco standerd primer & paint to avoid rust.up to 20 feet 4 core 1 sqmm & 1.00 sqm 3 core PVC coted copper cable reputed make for led light & pump.

Providing and fixing PTMT valve , 25 mm nominal bore as per instruction of engineer in charge

Trimming and trenching of tree branch mannually ( Height more than 10 feet) and disposal of cutting branches upto a lead of 50 mtr all complete job as per instruction of Engineer in charge.

Transportation of rubbish, garbages etc. including loading, unloading manually lead upto 5.00 Km by tractor trolley.

P/f sliding alluminum frame window lock (maruti lock ) on alluminium frame , screw etc all complete job as per instruction of E-I-C.

Providing and fixing PVC false ceiling of super hard quality including GI frame and all accessories complete , as per instruction of Engr incharge.

Total impact of GST for the purpose of CTC

GYANESHWAR SINGH

Tapan Kumar Biswas