Repair and overhauling of 335 HP pump three number of the fresh water pump house, repair and service of alum mixer motor and panel, repair of flocculators, installation of backwash sump valve and panel repair and installation and commissioning of 15 KVA generator for the laboratory at PNR Palya Pump House under City Corporation Tumkur

Repair and overhauling of 335 HP pump three number of the fresh water pump house, repair and service of alum mixer motor and panel, repair of flocculators, installation of backwash sump valve and panel repair and installation and commissioning of 15 KVA generator for the laboratory at PNR Palya Pump House under City Corporation Tumkur

Overhauling & Servicing the 1152 m3/hr, 54 mtr. head, 1480 RPM, UP250/46 Kirloskar Make HSC Pump set:- The work includes closing suction side and delivery side valves, dismantling the pump from motor ...

spare parts:-supply of UP250/46 Kirloskar Make brand new impller shaft sleeves and impller neck ring of Stainless steel material.

spare parts:-supply of UP250/46 Kirloskar Make brand new key for impller and pump shaft(EN08)

spare parts:-supply of UP250/46 Kirloskar Make brand new water deflector for avoid water leakage.

spare parts:-supply of UP250/46 Kirloskar Make brand new lantern ring phosporous branz

spare parts:-supply of brand new SKF make Bearings 6312MC3 for DE & NDE side

spare parts:-supply of brand new pin and bush type flexible coupling set for pump and motor

Repair of 2HP Capacity, 3 phase - 230 volts - 50 Hz - A.C. supply, vertical flange mounted (B-5), Enclosure type- IP-44 having worm reduction gearbox with 4 Nos of paddles, fabricated and machined ba...

Repair and overhauling of alum mixer motor, gear and fan: the work including dismantling of motors and couplimg fan, transportation dismantling of motor and replacing required spares parts and assembl...

Repair/Over hauling of Rewinding of 10 HP Capacity Horizontal induction motor The works includes dismantling of the motor from belt pully, inspection /testing with replacing the damaged spares ...

Attending minor repairs to Sluice Control Valve of 350mm dia placed at filter media for water flow control, removing in complete, washing, providing new rubber bush and gaskets, bolts and Nuts, plug ...

Re-conditioning/re-threading, brazing of Spindle rod and Gun Metal Check nut for 300 mm dia Sluice Valves including cost of materials & Labour work, transportation,alla taxes and duties. The Spindle a...

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments. 2 HP, Size 65x50 Head 13M, Discharge 462 LPM for l...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for.work...

PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing...

Repair or replacement of existing panel for painting, welding, etc backwash panel

Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and

fitting and fixing the same with necessary clamps, nuts and bolts/welding

and erection etc. complete. Wheel above 50 mm dia p-19...

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of

variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865

with the latest amendments and of grade GGG 40/50, shaft...

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards.

Repairs to existing Aluminium partition, refixing and relocating including

cost of material, labour, complete as per specifications.

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner ( upto one vent height plus 1 m above the ro...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and suchsimillar works in all kinds of soils, as per dra...

Fabricating supplying and mounting MS box made out SWG. suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying and fixing of LED type panel board indicating lamp push with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. item no 5.38 P-19 PWD Elec SR 2023-24

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 A PW...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but.without HRC fuses). With AC-23A duty and as per IS- 13947. 63 A

Supplying and fixing HRC fuse link on existing switch fuse base with.W loss as per IS-13703. Above 63 A to 200 A

Supplying, fixing and wiring rotary selector switch suitable for.Ammeter

Supplying, fixing and wiring rotary selector switch suitable for.Voltmeter

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current.Transformer Class 0.5 accuracy with Tape Wound.

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...

Supplying and fixing angle iron frame work fabricated out of M.S..angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.4...

Rotary handle for MCCB I 5.55 p-22

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor. improvement of rotating machineries like induction motor.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying of 1.1kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and res...

Supplying of 1.1kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and res...

Supplying of 1.1kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and res...

Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 HS Type 50 to 95 Sqmm

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. 2.5 to 25 Sqmm

Supplying heavy gauge PVC conduit pipe....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and fixing using inverted wood plugs in case of R...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for.work...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades.suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A. Ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.

Supply and fixing of Auxiliary contactor relay with 2 NO and 2 NC contact and operating coil voltage of 220V to 260V. fixed on existing wood/panel board using necessary bolts, nuts, washers and wiring...

Supplying and fixing Microprocessor based Electronic timer(without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)3-120sec setting.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying installation commissioning of 15 KVA Diesel Generator set with following specifications. Power rating as per standard rs perBS 5514 ISO 3046 ISO 8528 IS 1002 ISO 3046 Generator set specifica...

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SMEnclosure Sheet Metal Execution) 63 A

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...