REPAIRS TO FENCING, CULVERTS AND OTHER CONNECTED WORKS AT WSA AT AF STATION KALAIKUNDA UNDER GE AF KALAIKUNDA

Amount

S&F in repairs Galvanised Iron, spring steel, Punched Tape Concertina Coil of 610 mm Diameter with thickness of the tape 0.5 mm and dia of the spring core wire 2.5 mm with razor sharp barbs. Fixed in position by expanding the coil with heavy duty steel clips/as recommended by the manufacture. Note: Removal of old rusted concertina coil including barbed wire and straining wire if any and removal to store, fixed in any position and any location is deemed to be included in quoted rate.Complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.Complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground,embedded in concrete.Complete all as specified and as directed.

Dismantling fencing wire mesh, any type.Complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil.Complete all as specified and as directed.

M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregates as in Cement concrete in foundations, filling and mass concrete.Complete all as specified and as directed.

S&F Mild Steel Works (Miscellaneous) as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessarydrilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165+A2.Complete all as specified and as directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).Complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.Complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type.Complete all as specified and as directed.

S&F 10 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long.Complete all as specified and as directed.

S&F Mild steel Round bars 10mm dia and over confirming to Fe 410 W (Gde E-250, Quality A) or Fe 290 Gde 165, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link).Complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specially privided for (unreinforced) complete all as specified and as directed.

M & L for PCC 1:2:4 Type B1 using 20mm graded aggregate in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating.Complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer.Complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer.Complete all as specified and as directed.

Demolition of Brickwork masonry, built in cement mortar at ordered portions including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles Complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6).Complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces with cement mortar 1:4 mixed with liquid water proofing compound @ 0.25% by weight of cement or as per manufacturer instruction and finishing the surface even & smooth without using extra cement complete all as specified and as directed. Note:- Liquid water proofing comound shall be measured & paid separately

Material and labour for applying two coat of 100% acrylic exterior emulsion paint in camouflage pattern (Three colour as approve by GE) over and including a coat of primer to new plastered of wall (including chajja, facia & ceiling surface) including preparation of surface of any height including all necessary scaffolding complete all as specified and as directed.

Supply only Liquid Waterproofing Compound

Demolition of reinforced cement concrete as in Concrete of any description and in any position not otherwise specifically provided for.complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.Complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil.Complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point (soil).Complete all as specified and as directed.

M&L for Nominal Mix RCC 1:2:4 Type B1 using 20mm graded stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.Complete all as specified and as directed.

M&L for Nominal Mix RCC 1:2:4 Type B1 using 20mm graded stone aggregates as in Columns, pillars, piers, posts and struts under-reamed piles and mass concrete.Complete all as specified and as directed.

Use and Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete, flat.Complete all as specified and as directed.

Use and Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions ough finished surfaces of concrete, Square/rectangular.Complete all as specified and as directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link).Complete all as specified and as directed.

All as per Item No 30 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410-W Gde E-250 Quality A.Complete all as specified and as directed.

S&F Framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.Complete all as specified and as directed.

S&F Mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link).Complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W Gde E-250 Quality A.Complete all as specified and as directed.

M&L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match 1:2:4 type B1 using 20mm graded stone aggregates.Complete all as specified and as directed.

S&F 1.60 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.Complete all as specified and as directed.

Kalpana Traders (BID ID -3359083)

Palak Infracon (BID ID -3358829)

SHARMA ENTERPRISES (BID ID -3349350)