SPECIAL REPAIR TO BLDG NO P15 SHIP GALLERY P 13 P 14 P 88 P 89 SINGLE LIVING ACCN AND ASSOCIATED PARKING AT NTS GURUGRAM UNDER AGE BR AF GURGAON AND AGE EM AF GURGAON OF GE AF GURGAON

Amount

B/R WORKS Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed

Taking down steel tubing & connections of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections of 20 mm dia bore complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/hardstanding etc complete all as specified and as directed

M & L for Non Skid jointless ceramic printed scratch proof and stain resistant coloured tiles 600x600 x 9-10mm thick as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M & L for Non Skid jointless,scratch proof& stain resistance ceramic printed coloured tiles 600x600x9-10mm thick as in skirting etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M & L for Non Skid ceramic printed coloured jointless tiles 300x300x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M&L machine cut and mirror polished kota stone ( size not less than 55cmx55cm for flooring & for tread of steps will be in one piece) slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

M&L Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match,incl cutting edges etc complete all as specified and and as directed

M&L machine cut and mirror polished kota stone slab 18-20 in riser of steps(in one piece ) , skirting, dado and pillar aid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed

M&L for rounding to edges of stone(granite/kota) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed

M&L for Chequered cement concrete coloured tiles 30cm x30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L for exterior grade, coloured glossy finish ceramic designer endura tiles of size 30cm x 30cm x 8-10mm thick (as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc complete all as specifed and as directed

M&L for TMT bars 6 to 8 mm dia dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings,shelves,chajjas incl edges and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed.

M&L RCC 1:1.5:3 type A1 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,chajjas,facia etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, as required etc complete all as specified and as directed

M&L for mild steel framed work as in grills, grating, doors, etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed baluusters wals ways, railing framed wor of water tans and similar work etc complete all as specified and as directed

S&F Mild steel, plain black sheet 1.6mm thick in door shutters,, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed

S& F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed

S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed

S&F roll formed galvanised prepainted steel section window/ventilater section of frame 72x55 mm fixed to wall or concrete surface with MS hold fast (30X5mm section) 150 mm long made, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanozed as per IS 277 with zinc of 120 gms/sqm.) glazed shutter and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including powder coated grill / guard bars made of square bars 10mm dia at 150mm c/c Horizontal spacing fixed in MS flat frame (30x5mm) fixed to windows frame with screws,incl 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed type-4000 series ref drg no CEAF/STD-191/2014 SH1/2&2/2

S&F factory made PVC shutter/Shelves in required size at shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete including required frame work. The panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F 100 mm thick butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed

S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and directed by Engineer-in-Charge.

S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.

S&F ball catcher with 8 mm dia steel ball magnet catcher for cupboard shutter including striking plate as approved etc complete all as specified and as directed

S&F continous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30 mm etc complete all as specified and as direced

S&F in repairs wash hand basin counter sunk type vitreous china white glazed flat back, oval type size 550 x 400 mm, including CP waste coupling and waste pipe brackets and cutting for and pinning in ends of brackets and etc complete in all respect complete all as specified and as directed.

S&F stainless steel sink 1.00mm thick for kitchen with plug/waste pipe washers including cantiliver bracket or, connecting unions etc overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug/waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460mm with bowel size 410mm x 330mm x 160mm complete all as specified and as directed

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm white with cast iron ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed

S&F in repairs Vitreous China bowl Urinal half stall of size 465x355x265mm White (minimum) with waste coupling, waste pipe and CP spreader complete all as specified and as directed.

S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed

S&F Center hole basin mixer w/o Popup waste cat no F330014CP (HINDWARE) OR Equivalant all as specified and as directed

S&F wall mixer with provision for over head shower with115 mm long bend pipe cat no F330020(HINDWARE) OR Equivalant all as specified and as directed

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed

S&F in repair for 75 mm bore out let cast floor trap of hubless cast iron epoxy coated inside & outside all as per IS15905 with stainless steel gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings & fixed (concealled/Surfaced) complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings & fixed (concealled/surfaced) complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F in repair for 50 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed

Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts,wells,cesspits,manholes,pier holes,cable laying,sewage/water lines etc complete and getting out all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layer not exc 25cm thick.

S&F in repair 50 mm cast iron cowls complete all as specified and as directed

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete to be finshed even and smooth without using extra cement over 10 mm thick in 1:4 as dubbing coat after applying a coat of anticorrosion chemical coating upon exposed reinforcement etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound as per manufacturer's instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for rendering 10 mm thick in CM (1:3) on RCC Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L two coats of white wash on ceiling on old plastered surfaces including preparation of surfaces complete all as specified and as directed

M&L three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed

M&L for complete removal of existing treatment of wall surfaces complete all as specified and as directed

M&L for preparing plastered surface with 2mm thick Birla/Asian wall care Putty & applying two coat of oil bound distemper white or any tint over a coat of primer etc) complete as specified and directed

M&L preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed

Material and labour for preparation of old decorated surface of walls and applying one coat of weather proof exterior emulsion (colour matching with existing) paint by roller brush of approved manufacturer complete all as per manufactures instruction and as directed.

Material and labour for preparation of newely plastered surface of walls and applying two coat of weather proof exterior emulsion (colour matching with existing) paint by roller brush of approved manufacturer over a coat of primer complete all as per manufactures instruction and as directed.

S&F in repair mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed

M&L for preparing surface of steel and iron work, new or old , treating ends of posts, back of chowkhats etc area tarred exc 0.10 sqm and not exc 0.50 sqm each and treated with tar or coat tar or black paint etc complete all as specified and as directed

Removing excavated soil/Materials to a distance exc 1.50 Km and depositing the debris outside of MOD land where directed etc complete all as specified and as directed

Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing debris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed

Disconnecting existing tank of capacity exc 250 ltr but not exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc.complete all as specified and as directed

Dismantling of existing tank of capacity exc 250 ltr but not exc 500 ltr,water tanks and removing to store and S&F in repair rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) 3 layer of 500 liter capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed

S&F rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) 3 layer of 1000liter capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed

Fixing only as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately Notes :- Rates includes to carried out the work on roof slab up to 4th stories building nothing extra shall be admissible on this account

M&L APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed

M&L two coat of aluminium paint over top surface of water proofing membrane etc complete all as specified and as directed

S&F in repairs mild steel powder coated decorative curtain rod of 25 mm bore with wood finishes including brakets 02 nos& finale (Wood finishes) etc complete all as specified and as directed

Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed

Demolition Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof)

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge

M&L for granite (of any type) stone slab 16 to 18mm thick machine cut and mirror polised, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and directed.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

S&F Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Eng-in-Charge.

S&F (3000x900) mm size retro-reflective boards Double Sided Shoulder Mounted Direction/sing Board conforming to XI of ASTM including 2.00m long 50 mm dia Stainless steel (Grade 304) hollow tubes sections, channels, plates, angles etc. of any size and sections as approved by GE in railings, balusters, post, newel posts running rails, middle rails etc including necessary welding, riveting, bolting, grinding, buffing, polishing and making curvature (wherever required) including necessary accessories etc including comprising of customized SS hollow section frame work, aluminum composite panel (ACP) mill finished or PVDF coated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overly film. The horizontal and vertical members of the SS frame module shall be made of SS hollow section size 50x50x3.6mm as per approved drawing. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5mm thick skin of aluminum on both sides. The ACP shall be routed, folded and fixed on the SS frame with VHB tape, 24mm wide and 2.3mm thick provided throughout the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame On the front face of the ACP, micro prismatic retro-reflective sheet and letters (in English and Hindi) and Emblem as directed, conforming to Type-IX of ASTM: D 4956-09 shall be pressure fixed as background sheet (in white colour) which will be over laid with electro cut transparent film of approved make and colour to create a desired road side and information message. The rear side of the SS frame shall be covered with balancing ACP sheet of the same description as mentioned above and shall be fixed in similar manner as described above. The rate shall be inclusive of all materials, labour equipments, fabrication, transportations, erection, installation and incidentals all complete all as specified and directed by as per direction of Engineer-in-Charge. Note:- 1. Colour of Sheets and letters shall be approved by GE. 2. Rates shall be deemed to be included for reflective type of letters logos and arrows no extra cost shall be paid separately

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge.

S&F powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Door closer hydraulically regulated, universal type designation No 3 suitable for door shutters of 851 to 1000mm in sedth and weight between 61 to 80Kg complete all as specified and as directed.

S&F Mortice lock, vertical type, size 100 mm brass 4 levers complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed

M&L for PCC (1:3:6), type C1 (using 20mm graded crushed stone aggregate) as in plinth protection etc complete all as specified and as directed

M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab man hole covers and drain covers with 40mm dia holes made in the slabs to drain runoff etc complete all as specified and directed by Engineer-In- Charge

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed

S & F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge Note:- The work including fixing at height up to 15 m above ground level hence the rates deemend to be included in the rates and nothing extra shall paid

S&F for 100 mm bore cast iron soil, waste and vent pipes, (sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls including necessary clamps complete all as specified and as directed.

S&F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls including necessary clamps complete all as specified and as directed.

S&F in repair for 100 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed.

S&F in repair for 100 mm bore cast iron branch piece, single (equal or unequal) ordinay or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed.

S&F in repair for 75 mm bore cast iron branch piece, single (equal or unequal) ordinay or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3Kg of cement per sqm, top layer 15mm cement plaster with GREY CEMENT 1:1/2:2 (1 GREY CEMENT :1/2 coarse sand : 2 Marble stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushed and water to expose the marble ston chipppings complete all as specified. The groove shall be 15 mm wide and 15 mm deep in the top layer of washed stone girt plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden batterns, repair to the edges of panels and finishing the groove complete as per specificatio and direction of the Engr-in- Charge. Note : Area includes in this items upto 4 stories of building, necessary scaffolding and arrangements are deemed to be included in rates.

E/M WORKS Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.

Taking unserviceable sub main wiring of any type/size including wires, conduits/battens etc complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable MCB DB's/AC's box of any size/rating complete all as specified and directed by Engr-in-charge.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH cable 1100 volts grade confirming to IS: 694 drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 3.00 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed FRLSH cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-

One light point controlled by one switch with cables 1.5 Sqmm size all as specified and directed.

One fan point/Exhaust fan controlled by one switch with cables 1.5 Sqmm size all as specified and directed.

One 5 pin socket oulet 5/6 amps on same board including single core straned copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in nsame conduit as earth wire to the common earth and connecting to earth dolly all as specified.

One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sqmm of size all as specified and directed.

M&L for point wiring complete with stranded copper conductor 4 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH cable 1100 volts grade confirming to IS: 694 drawn in and including medium grade concealed PVC conduit confirming to ISI marked not less than 25mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 3.00 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 4 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one 6 pin socket outlet two in one 16/6 Amps on an independent board. (for geysers point) Note : For item No 129 to 131 Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

All as per item No. 130 above but with cable 2.5 sqmm and earth continuity conductor of 2.5 sqmm stranded copper unsheathed complete all as specified and as directed.

Supply and fix switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed at site.

Supply and fixing socket outlet 2 in 1, 3 pin 5 Amps all as specified and directed at site.

Supply and fix switch socket combination 5 Amps/16 Amps, 5 in 1, flush type all as specified and directed at site.

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed at site.

Supply and fix in replacement of 24 wat (4ft long) Intenso High Watage Batten-PC Self Ballasted LED Batten, Extruded Thermoplastic body with PC Diffuser, CRI > 80, Beam Angle 120' Cat Part No LD00103070 incuding 1 No 24 watt LED Tube Energy Efficient. Make : Polycab or equavalent model in Bajaj/CG/Phillips/Wipro.

Supply and fix in replacement of Intenso LXS LED Batten 2 feet 12 watt 6500K Cat Part No LD00103028 Self Blasted LED Batten, Extruded Thermoplastic Body with PC Diffuser in Square shape, CRI > 80, Beam Angle 120' incuding 1 No 12 watt LED Tube energy Efficient. Make Polycb or Equavelant Model in Bajaj/CG/Phillips/Wipro.

S&F ceiling fan Pearl white, spartz model, 1200mm sweep, Power input 75W, complete all as specified and directed by Engr-in-charge. Make: Havells

Taking down exhaust fan complete all as specified and as directed.

Supply and fix in replacement of LED building light luminaire 30 watt, pressure die cast aluminium housing with heat resistant toughened glass & IP66 protection complete all as specified and as directed model No FREEDOM +,Cat part No LSTS-30CDL Make: CG or Equvalent model in Bajaj /Philips/HELONIX. .

M&L for in repalacement of bracket made from GI pipe light grade 32mm bore bent to shape as required at site for street light fitting 1.2 mtr in length and fixed on wall/pole including necessary MS clamps, nuts, bolts and washers including welding and painting complete all as specified and as directed.

Taking down exisitng water heater all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

Taking down of fitting bracket/ceiling/bulk head/tube light fitting of any size complete all as specified and as directed.

Supply and lay in trenches /under roads/ crossing or fixed to wall/ pole, GI tubing light grade of size 80mm bore for protection of UG cables complete all as directed.

S&F submain wiring with unsheathedmulti-stranded HR Grade copper condductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6.0 Sqmm single core HR Grade and one run of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub Main DB complete all as specified and as directed. Note :- (i) Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. (ii) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F submain wiring with unsheathedmulti-stranded FRLSH Grade copper condductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core FRLSH Grade and one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub Main DB complete all as specified and as directed. Note :- Two run of single core 4 Sqmm cable with one run of 2.5 Sqmm earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note 1 :- Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

Supply and fix in replacement MCB, DB , SPN 8 way suitable for single phase 240 volts with 200 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single/double pole complete all as specified and directed at site.

Supply and fixing in replacement of MCB signle pole 5-30 Amps 230 volts 'B' series complete all as specified and as directed.

Supply and fixing in replacement of MCB single pole and neutral 40 Amps 230 volts 'B' series complete all as specified and as directed at site.

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed.

Supply and fixing Freshner High Speed Exhaust Fan/250mm Sweep, 45 watt Power input, Speed 1250 RPM, AIR Delivery 750 CMH with lowers and shutters including fixing on wall help of fasteners, drilling and making hole etc including making good the disturbed surface including making suitable opening in wall, plastering work and finishing of all disturbed surface complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers exc 25 cm thick complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted. Note : Punned down thickness shall be measured and paid .

M&L for sub class ‘B’ bricks old size laid flat dry in trenches over cable, across the direction of cable complete all as specified & directed .

Supply and fixing vertical type load line distribution board, double door, 4 way AC, 3 Phase 415 Volts, TPN bus bar 200 Amps rating and earth bus and din rail including 01 No. MCCB 3 Pole 415 Volts, 50 Hz, 100 Amps 10 KA breaking capacity as incomer complete.

Supply, laying and testing in replacement of cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 3.5 core x 50 Sq mm. complete all as specified and as directed. Note : Provision of suitable double crimpped lugs and glands deemed to be included in quoted rates.

k k enterprises

P R Constructions

Phogat Builders

Ish Engineers and Contractors

RACON CONSTRUCTION

M/S ujjwal associates

M/S GEETANJALI ENTERPRISES

Shakashi Construction Co.