Construction of toilet cum bathroom at RD 15800 Pump House of Thanesar Disty.

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soils, not exceeding 2 mtr. depth including dressing of botton & sides of trenches stacking the excavated soil, clear from the edge of excavation & subsequent filling around masonry, in 15cm. layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 mtr. (HSR No. 6.6)

Cement concrete 1:3:6 with stone aggregate 20mm nominal size in foundation & Plinth. (HSR 10.40)

First class brick laid in cement sand mortar 1:4 in foundation and plinth. (HSR11.4)

Damp proof course 75 mm thick of cement concrete 1:2:4 using stone aggregate 20mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded. (HSR 10.113)

First class brickwork laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level. (HSR 11.9)

RCC 1:1.5:3 with stone aggregate 20mm size for slab of roof including centering and shuttering. (HSR 10.82+10.95 (a)

FE-500 EQR TMT Steel bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete. (HSR 18.22)

12 mm thick cement plaster 1:4.(HSR 15.5)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate (HSR 18.34 (b)

Cement Concrete 1:8:16 with stone aggregate 40mm nominal size in foundation and plinth. (HSR 10.28)

Providing and fixing Ist quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manu-facture) of approved make in all colours, shades except burgundy, bottle, green black of any size as approbed by E.I.C in skirting riser of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with gray cement slurry, including pointing in which cement mixed with pigment of matching shades complete (HSR 14.92) (b) size of ceramic glazed 300x450mm

Providing and fixing ceramic tiles/ anti skid tiles of size 400mm x 400mm or above size of approved make in flooring , laid in any pattern as specified over base of 20mm thick cement sand coarse mortar 1:3 an jointed with white cement slurry mixed with pigment to match the shade of tile (HSR 14.91)

Cement pointing 1:2 deep variety on brick & tile work. (HSR 15.60)

Factory manufactured solid flush door shutters, with block board core as per I.S.No.1659- 1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressesd, conforming to I.S.2202 part I and II, fixed in position,including iron hinges,screws, chocks/cleats and stops etc.(excluding the cost of any fittings other than specified above,but including labour for fixing the same in position)- (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges.) 35 mm thick (HSR 17.93 (a) (iii) @ Rs. 448+165% =1187.20 per Sqm

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Applying pink primer (1st quality) or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 16.2)

Painting two coats excluding priming coat with ready mixed paint (1st quality) in all shades on new wood work. (HSR 16.4)

Bottom khurra on ground 1:2 m X 0.6 m consisting of brick-on-edge laid in cement mortar 1:3 over 75 mm cement concrete 1:8:16 including 12 mm thick cement plaster 1:3 (HSR 13.57).

Top khurra 0.6 m x 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16. (HSR 13.50)

Providing and PVC R.W.P 6 kg. pressoure of ISI Mark 100mm dia PVC pipe 6 kg. pressure. (HSR 13.89 (a)

Wiring 1.5 Sqmm copper conductor cable light point (short ) HSR 31.36 (ii) (a)

Wiring in 1.5 sqmm PVC insulated copper conductor in 1.6mm thick conduit pipe, 3 pin 5amp plug point including earthing the 3rd pin etc (medium point) (HSR 31.36 VII) (b)

White washing three coats (HSR 16.48)

Terracing consisting of tiles 22.86 cm x 11.43cm x 3.81cm laid over 87.50mm mud fillig on a layer of 25mm mnd Plaster and on other layer of mud mortor for laying the tiles, including two coats of bitumen laid hot at 1.65kg per sqm on top of RCC slab including growting with cement sand mortar 1:3 & top surface to be left clean etc (HSR 13.13)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings white colour (HSR 30.6)(i)

EXTRA OVER Item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY LOW LEVEL VITREOUS CHINA WARECISTERN complete with flush bend all other necessary fittings instead of C.I. high level cistern complete with fittings. (HSR 30.12) (i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as give below ( to the approval of the Engineerin- charge) including china plug for tap hole where necessary ; R.S. or C.I.BRACKETS for building into wall including painting; 32mm C.P.BRASS WASTE WITH C.P. brass chain and rubber plug; 15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design (as approved by the Engineer-in-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS, FLOORS AND PAINTING OF FITTINGS ETC. WHITE (HSR 30.41 (ii)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). Bib cock long body (HSR 30.75 (a)

Providing and fixing in position best Indian make flexible tube connection, C.P. Brass (15mmx300mm) HSR 30.82 (b) (i)

Providing and fixing in position C.P. Brass stop cocks (as approved by E.I.C) 15mm stop cock (stop cock male & female) HSR 30.76 (a) (i)

Supply of GI Pipe 15mm internal dia B class NS item

LABOUR FOR LAYING JOINTING, FIXING AND TESTING G.I./P.V.C. /W.I.PIPE LINES AND SPECIALS tees bends, sockets elbows etc., INSIDE BUILDING and testing etc., complete including cutting threading. INCLUDING COST OF SPECIALS15 mm internal diameter of pipeline (HSR 28.18 (b) (i)

Providing and fixing elbow GI 15mm (NS item) rate already approved

PROVIDING AND FIXING POSITION BEST INDIAN MAKE FL (ii) 5 LITRES CAPACITY mosquito proof INDIAN MAKE C.I.AUTOMATIC FLUSHING CISTERN, PAINTED WITH non-yellowing white enamel paint or other approved shade enamel paint on outside and superior black bitumastic paint on inside complete with screwed 15 mm pipe; Single colour (HSR 30.19 (ii)

Providing and fixing HDPE water storge Tank of 500 Ltr capacity (HSR 30.119 (c)

Providing and fixing sliding bolt with nuts and screws,etc.,complete iron size 300 mm X 16 mm (HSR 17.83 (b)(i)

Providing & fixing PVC band ISI mark (100MM dia PVC bend)HSR 13.90 (a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. INDIAN MAKE 600mm X 450mm (HSR 30.71 (a)

Cost of aluminium fittings complete for doors and windows, such as tower bolts,handles,etc., and screws for these fittings (excluding sliding bolt) for single leaf shutter (HSR 17.72 (a)

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the wells etc C.P.BRASS Soap dish large (HSR 30.70 (a) (ii)

Finishing walls with exterior decorative comment based paints such as snoweem, robbiacem etc on new work, two coats to give an even shade. (HSR 16.61)

Laying dry brick blast (40mm gauge) (HSR 10.117)

Providing and Laying sand filling in spectic tank

Vijay Kumar

THE OM COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED