SPECIAL REPAIRS OF BLDG NO P-06 OF 531 ASC BN UNDER GE JHANSI

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of cement concrete in ground floor including terrazo flooring and paving n exc 15cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

Taking down eaves gutter and rain water pipes including all fittings any size and pattern complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed

Taking down Chowkats or frames Not exceeding 1.5 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed

Taking down shutters of any description exc 1.0 Sqm but not exceeding 2.00 Sq. M each complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 with water proofing compound @ 0.20 Ltr/bag finished fair and even without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured and paid separately complete all as specified and directed.

M&L for rendering 5mm thick CM(1:3) on ceiling surface of chajja,floor slab, balcony etc with treating exposed surfaces of steel and iron work of any description width or girth, with ready mixed tar or coal tar black paint fixing with 12mm wire netting of gavanised steel wire,1.40mm dia and grouted with cement slurry mixed with concrete bonding agent 200ml in 50 Kg weight of cement and making good the suface even fair including necessary staging and scaffolding complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick redering in cement (1:4) on concrete/ brick surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of new wall and applying two coats of cement base paint over primer, complete all as sppecified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distember over a coat of primer including apply a thin layer of JK/Birla wall care putty to make the surface to be plain and smooth before primer complete all as sppecified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of exisiting treatment, washing and rubbing of old distempered surfaces and applying two coats of oil bound distember over a coat of primer including apply a thin layer of JK/Birla wall care putty to make the surface to be plain and smooth before primer complete all as specified and as directed.

M&L for complete removal of exisiting treatment, washing and rubbing of old surfaces of wall and applying two coat of cement base paint complete all as sppecified and directed.

M&L for complete removal of exisiting treatment, washing and rubbing of old surfaces of ceiling and applying two coat of white wash complete all as sppecified and directed.

M&L for preparation of old or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide complete all as specified and directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

All as per item No 21 but applying one coat of synthetic enamel paint on old wooden surface complete all as specified and directed.

M&L for Non-skid cermaic coloured tiles (mat flooring) Size 300X300X7 to 8mm thick, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed.

M&L for Coloured Glazed ceramic tiles 300x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick redering in CM 1:4 on wall complete all as specified and directed..

M&L floor Vitrified tiles 7 to 8mm thick (squre/rectanglar) are of ech tiles 600MMX600MM, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.complete all as specified and directed

All as per item No 25 as above but in skirting including 10mm thick backing coat in CM 1:4 on wall complete all as specified and directed..

M&L for machine cut Kota stone slab flooring 18-20 mm thick and laid over and incl 15mm thick screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone as per local trade practice, complete all as specified and directed.

All as per item 27 above but on vertical surfaces such as skirting/dado over 10mm thick CM rendering in CM 1:4. complete all as specified and directed.

M&L for Non -skid cermaic coloured tiles endura Size 400X400X10mm thick, out door tiles in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed.

All as per item No 29 above but in skirting including 10mm thick backing coat in CM 1:4 on wall complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L for cutting chases,pinning in brick walls for concealed water tubing n.exc 10cm girth and making good facing where required and pointing in CM 1:3 complete all as specified complete all as specified and directed

S&F in repair Vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP waste copling,including PVC Waste pipe 600mm long complete all as specified and directed. Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).

Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified and directed. Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).

Supply and Fix in repairs 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long complete all as specified and directed. Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).

S & F in repairs 15 mm bore Bib taps, fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).

S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed Make :- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).

S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, complete all specified and directed. Make: Hindware/ Cera/ Prayag / Pearl /Parryware.

S&F SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and directed. Make : Camry / Cera / Parryware / Prayag / Pearl

S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all as specified and directed. Make : Prayag/ Hindware/ Parryware/Cera/ Pearl.

Demolition and breaking up 150mm drain pipe (salt glazed ware, AC or reinforced ) set in cement mortar complete all as specified and directed .

M&L Concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm pipe all as spd in cement concrete 1:3:6 type C-2 (Nominal mix) using 20 mm graded crushed stone aggregate complete all as specified and directed.

M&L Salt glazed stoneware (SGSW) drain pipes 150 mm bore laid and jointed on concrete bed, complete including testing etc. complete all as specified and directed. (Concrete bed shall be measured and paid for separately).

S&F in replacement of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F in replacement of PVC (SWR) pipe of 75mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

M&L for mild steel section as in door/windows chowkhats frame of steel gate of grade Fe-410-0 or Fe-310-0 including all necessary machine wks i.e. cutting, welding, grinding etc, complete all as specified and directed.

M&L for mild steel hold fast and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) for bed block for fixing of chowkhats, complete all as specified and directed

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc complete all as specified and directed.

S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. Make : Rajshree / Sintex / Greenlam

S&F Solid PVC door frame of size 50mmx47 mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified in SSR Part-II 2010 section 8.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all as specified and directed

S&F of 75mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F of 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed.

S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete all as specified and directed.

S&F of 300mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed.

S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. Make : Ashish/ Classic

S&F of 100mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. Make : Ashish/ Classic

S&F of 150mm aluminum handle cast type anodized complete all specified and directed. Make : Ashish/ Classic

S&F of 100mm aluminum handle cast type anodized ccomplete all as specified and directed Make : Ashish/ Classic

S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed.

S&F for Door stopper 140 mm of aluminium alloy body anodised with tongue of rubber bush at one end fixed to door complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass frusted/figured and pin headed glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S & F stainless steel wire cloth 0.71 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

M&L in repair for Aluminium anodised curtain rod 25mm dia with caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed.

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gage , any thickness including nanital or similar pattern in roof coverings complete all as specified and directed

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets nails complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5 mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of Size 595x595mm duly fixed in ceiling frame work, complete all as specified and directed

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40mm complete all as specified and directed.

M&L for rendering 10mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. Note : water proof ing compound shall be provided @200ml in 50 KG of cement by weight and the rate will be measured and paid separately) complete all as specified and directed.

M&L for providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing membrane comprising of the following for Non approchable roofs (a) Taking down existing treatment/ felt, cleaning ,sweeping and washing down with water to remove all dust etc from plastered roof surface/wall and filling of crack with sealing compound etc (b) Bituminous based primer cofirming to IS :3384-1965 at 0.3 KG per Sqm.(c)One layer of super thermo APP modified water proofing membrane 3mm thick with non woven polyster core of any one make (M/S STP Ltd / Hyperplas membrane of IWL India LTd and Tikkin tar Ltd laid and bonded to sub stratra by heat process. The over laps shall be sealed by flame torch as per manufacturer instructions. (d) Vertical surface after cutting necessary grooves and making good with pcc gala1:2:4 Type B0 etc bitumen all as per manufactures instruction.(e) Application of bituminous aluminium paint as per manufactures instruction complete all as specified and directed.

M&L for powder coated aluminium wall partition, fixed ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as directed.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.

M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated 100mm aluminum hinges 03 Nos in each door, powder coated 200mm aluminum tower bolts 01 No in each door, 06 lever mortise lock 100 mm size - 01 No, powder coated aluminum snap beading, screws etc, complete all as specified and directed.

M&L for powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings in each shutter such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 Nos), suitable handle (01 No), tower bolt 100mm (01 No), complete all as specified and directed.

S&F of aluminium Decco grill with 05 mm dia and 50 mm mesh size of design and pattern as approved by Engr-in-Charge, complete all as specified and directed.

S&F of glass, brown colour, tinted type, 5.0 mm thick, each panes not exc 0.5 sqm, suitable for aluminium window / Ventilators / door opening and similar work, ccomplete all as specified and directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer with preparation of new surface of steel n. exc. 10 cm in width or girth complete all as specified and directed.

S&F mild steel work as in wind ties for roof including securing bolts necessary drilling bolting etc, complete all as specified and directed.

M&L for RCC type B1 1:2:4 usingn20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

S&F Fe-410W (Gde-E-250 quality-B) Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including fabrication complete all as specified and directed.

M&L 20mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:- Make For Conduit : -AKG/ Atul/ Kalinga/Precision/Modi ; Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

One light / exhaust fan / ceiling fan/ bell point controlled by one switch complete all as specified and directed

One 6A socket point controlled by one switch on independent board complete all as specified and directed

One 6A socket point controlled by one switch on same board complete all as specified and directed

All as per no. 108 here-in-before but with 2.5sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board complete all as specified and directed.

M&L for Circuit/submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc complete all as specified and directed. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

All as per 110 here-in-before but 2runsX4 Sqmm +1runX4Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

Notes for item No. 108 to 111 (i) Quoted rate shall deemed to incude the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & caping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing caping may be used in that portion. Make For Conduit : -AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

S&F, Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F Bell push switch, single pole, one way, 6 Amps, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F electric bell of DINGDONG type, 240 volts, single pole and making all necessary connections, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S&F, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

Supply and fix electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed. Make :Havells(Reo) /Goldmedal /SSK /GM

S & F 7 W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink complete all as specified and directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20/22Watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix recessed mounted LED panel light 2'x2' size, 36 watts full white with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for Amstrong / grid false ceiling complete with fixing accessories and all as specified and directed. Make: Philips / Havells / Wipro / Bajaj / Osram

Supply and fix LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP 65degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed.. Make: Havells / Bajaj / Wipro / Philips /Osram

Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Make : Indo Asian / L&T / Havells

Supply and fix exhaust fan, 300mm sweep with 04 Nos of blade leafs, 70 W power consumption, 1300 to1400 RPM, 100 % copper winding heavy duty motor with double ball bearings including supply and fixining of metallic louvers and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose to connector of fan complete all as specified and directed. Make: Crompton / Khaithan/ Usha / Bajaj / Almonard

Supply and fix MCCB / MCB distribution board, Vertical TPN, 4 way with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Make : Indo Asian / L&T / Havells Note: MCCB / MCBs shall be measured and paid separately

Supply and fix MCCB 100A, 16 KA, 3 Pole, 415 V, 50 Hz with fixed thermal magnetic release complete all as specified and directed. Make : Indo Asian / L&T / Havells

Supply and fix MCB distribution board, SPN, 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

S& F MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz complete all as specified and directed. Make : Indo Asian / L&T / Havells

All as per srl item no. 131 here-in-before but 6 to 32 Amp, Single Pole complete all as specified and directed. Make : Indo Asian / L&T / Havells

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down existing service cable of any description complete all as specified and directed. Make: Havells /Polycab /Univarsal/Gloster/Asian Cable/RPG

M&L for High density polyethylene pipes (HDPE) 50mm dia of pressure rating laid in trenches/floors/duct or fixed on walls /pole for cable protection complete all as specified and directed. Make: Finolex / Kisan / Prince / Tirupati /Supreme / Jain Irrigation Sys

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of cable and getting out in any type of soil complete all as specified and directed

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

A K ENTERPRISES