ADDITION / ALTERATION TO AIRMEN MESS AT AIR FORCE STATION UDHAMPUR

Amount

SCHEDULE "A" PART-I (BR Portion ) .

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

All as per item 2 above but not exc 1.5 Sqm each

Demolition of brick work or stone masonry for the portions ordered to be dismantled built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-Charge. .

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling incl cement mortar bedding(but not backing) removing serviceable tiles, if any to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

Forming jambs, etc in cement mortar 1:4 etc to openings, incl cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete all as specified and directed by Engr-in-Charge.

S & F in repairs stainless steel curtain rod 25mm dia with brackets and finials complete as specified and directed.

M&L for steel window with side hung shutter incl. box type hinges with steel handle,tower bolt & steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed by Engr-in-Charge.

M&L for steel window with side hung shutter incl. box type hinges with steel handle,tower bolt & steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed by Engr-in-Charge.

M&L for MS work as in grills,gratings etc with ends of bars shouldered or riveted framed guard bars barred Iron doors,ladders conforming to Fe-410-0-or 310-0 complete all as specified and directed by Engr-in-Charge.

M& L 75 mm thick cement concrete type D-2, (1:4:8) using 40 mm grades stone aggregate as in sub base of floors complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M & L for kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10 mm thick in cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick cement concrete, type B-1, 1:2:4 (20 mm grades stone aggregate as in floors complete all as specified and directed by Engr-in-Charge.

M & L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in polymer modified adhesive and pointed with cement grout of the shade complete all as specified and directed by Engr-in-Charge.

M & L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in polymer modified adhesive and pointed with cement grout of the shade complete all as specified and directed by Engr-in-Charge.

Supply for premium polymer modified tile adhesive for large format range of vitrified and porcelain tiles for floor and wall application over concrete substrate and application for tile on tile over substrate like ceramic,vitrified,mosaic and natural stone complete all as specified and directed by Engr-in-Charge. Make-Pidilite,Roff,Dulux,Dr Fixit,Fevicol etc

Supply only filling the joints between tiles by epoxy grout to match the colour and pattern of tile approved complete all as specified and directed by Engr-in-Charge. Make:-Astral, Roff,Lapox,Araldite etc

M & L non skid ceramic coloured tiles 7 to 8 mm thick ( Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 sqm, in floors over cement screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M & L glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick laid over cement screed 10 mm thick in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for (10mm+5mm) thick in double layer rendering in cement mortar 1:6 & 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer's instructions, complete all as specified and directed by Engr-in-Charge. Note : Integral water proofing compound shall be measured & paid for separately under relevent item.

M&L for (10mm+5mm) thick in double layer rendering in cement mortar 1:6 on fair faces of brick /concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. .

Supply only water proofing compound conforming to IS 2645-1975 complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over and 1 mm thick plaster of paris putty on plastered surfaces to prepare the surface even and smooth over a coat of clearcollecomplete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered wall surfaces and providing and applying putty of 2 mm thickness over plastered/primered surfaces to prepare even and smooth and finishing walls with acrylic smooth exterior paint of required shade: New work(two or more coats) applied @ 1.67Ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm in Camouflage pattern) complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on ceiling, preparation of surfaces plastered or unplastered over a coat of clearcolle and applying two coats of whitewash complete all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate ,12mm bar threshhold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

All as per Ser item No 31 here in before but of frame size 105 mm x 60 mm

M&L for providing cement concrete Type B1,1:3:6 in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and directed by Engr-in-Charge.

M & L for 35 mm thick 2nd class HW plain framed, panelled shutters with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS: 1003(part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

M & L for glazed and skelton shutters of 2nd class hardwood, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part I Section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of new wood or wood based surfaces of any description not otherwise described exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F Extruded brass handle, fabricated type polished , 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F 250mm long brass sliding door bolt with sand or di-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed by Engr-in-Charge.

S&F brass barrel tower bolts, with caast or sheet barrel and rolled or cast bolts and fixed with 300 mm long bolt complete all as specified and directed by Engr-in-Charge. .

All as per item No 41 above but 200 mm

Preparation of new steel surfaces of any description not otherwise described exceeding 10 cms width or girthnot otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer complete all as specified and directed by Engr-in-Charge.

M & L 75 mm thick cement concrete type B-2 1:2:4 (40 mm graded stone aggregate) as in floors finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

Supplying & laying of CPVC pipes outer dia 16 mm SDR 11 & Plain CPVC 11 SDR fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge.

S&F 15 mm bib taps fancy type , cast copper alloy with Crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule iron, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. . Make-Cat No-F-1018151/F-2008151 of Cera or COP-037PM of Jaquar or MOR-1030 of Marc

S&F in repairs 15 mm bib taps fancy type, cast copper alloy with Crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule iron, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. . Make-Cat No-F-1018151/F-2008151 of Cera or COP-037PM of Jaquar or MOR-1030 of Marc

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, laying of cable etc or for shafts , wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

M&L for PCC type D-2,1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction buttwelded tubes conforming to IS 1161-1979 grade St.-240 including one shop coat of zinc chromate primer paint including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment.(Fe 410 -W (Gde- E- 250) quality- A ) complete all as specified and directed by Engr-in-Charge.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for Pre-painted galvalume corrugated aluminum zinc coating GI based steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and as directed by Engineer-in-Charge.

M & L hardcore of broken stone or boulders of gauge not exc 63 mm depoisted, spread and levelled inlayers n exc 15 cm thick , watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced Cement Concrete M-25 Design mix ( using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc ; basement slabs, under- reamed piles and mass concrete, all complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced Cement Concrete M-25 Design mix ( using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced Cement Concrete M-25 Design mix ( using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced Cement Concrete M-25 Design mix ( using 20 mm graded crushed stone aggregate) as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge.

M&L for Reinforced cement concrete M-25 Design mix (using 20 mm graded crushed stone aggregate) as in chajjas complete all as specified and directed by Engr-in-Charge.

Form work to sides of concrete foundations, footings, bases of columns, plinth beams, and similar work,with rough finish surfaces of concrete flat complete all as specified and directed by Engr-in-Charge.

Form work to sides of pillars, posts sturts, piers, columns and stanchions , rough finished surface of concrete complete all as specified and directed by Engr-in-Charge.

Form work to sides of soffits of floors or roof beams, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc. rough finished concrete surface of concrete complete all as specified and directed by Engr-in-Charge.

Form work to soffits of RCC suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, rough finished surface of concrete, complete all as specified and directed by Engr-in-Charge.

Form work to chullah hoods, chajjas and similar items including edges, rough finished surface of concrete complete all as specified and directed by Engr-in-Charge.

TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.

M&L for Brick work with sub class 'B' bricks as in half brick thick straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed by Engr-in-Charge.

M & L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement mixed with integral water proofing compound complete all as specified and directed by Engr-in-Charge. ( WPC to be paid separately

M & L for 40 mm thick cement concrete 1:2:4, type B0 damp proof course to horizontal or vertical surfaces incl necessary form work and mixed with integral water proofing compound (to be paid separately) complete all as specified and directed by Engr-in-Charge.

Preparing plastered or unplastered new surfaces of ceiling and applying two coats of white washing, as on ceiling complete all as specified and directed by Engr-in-Charge. .

M&L for 50 mm thick cement concrete Type C-2,1:3:6 as in plinth protection laid in alternate bays and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection complete all as specified and directed by Engr-in-Charge.

S&F Steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying & Fixing in opening as per specification complete all as specified and directed by Engr-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S & F 100mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed by Engr-in-Charge.

Supplying & laying of CPVC pipes outer dia 20 mm SDR 11 & Plain CPVC 11 SDR fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge.

S&F stop valve/angle cock fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions size 15mm complete all as specified and directed by Engr-in-Charge. Make-Cat No-F-1018201/F-2008201 of Cera or COP-057PM of Jaquar or MET-1060 of Marc

S&F basin mixer single liver without popup waste system with 450 mm long Braided Hoses complete all as specified and directed by Engr-in-Charge. . Make:- Cat No COP 051BPM of Jaquar or F1018451 of Cera or MOR-1100 of Marc

S&F health faucet (15mm) mild steel body with wall hook and 1.25 Mtr. SS braided rubber hose pipe with complete accessories complete all as specified and directed by Engr-in-Charge. Make-Cat No-ALD-573/ALD-563/ALD-577of Cera or F-8030106AB/F-8030103/F-8030105AB/F-8030104 AB of Jaquar or MAC-3051 of Marc

S&F Wall mixer with provision for Overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and directed by Engr-in-Charge. Make:- Cat No COP-273PM of Jaquar or F-108401of Cera or MCT-1150 of Marc

S & F 150 x 150 mm overhead shower including arm complete all as specified and directed by Engr-in-Charge. Make :-Cat No-OHS-1605 of Jaquar or F-7010211SS of Cera or MIZ-2140 of Marc

S&F PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-Charge.

S&F 32mm dia PVC waste pipe with cap socket suitable for 32 mm waste coupling complete all as specified and directed by Engr-in-Charge.

S&F vitreous china wash down water closet pan (pedestal pattern), white with seat cover complete all as specified and directed by Engr-in-Charge. Make :-Cat No-CNS WHT 551SSPP of Jaquar or S1057101 of Cera orV-951 of Varamora

S&F PVC(SWR) pipes single sockets, in any length with rubber rings joints laid in trenches or in floors, or fixed to wall 110mm dia complete all as specified and directed by Engr-in-Charge.

All as per item No 90 but 75mm dia.

S&F PVC (SWR) junction single (T) equal or unequal 110mm bore with oval access door complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 110 mm bore with oval access door complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 75 mm bore with oval access door complete all as specified and directed by Engr-in-Charge.

M&L PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F 75 mm size (SWR) floor trap,plain with gratting including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S& F PVC vent cowl 75 mm dia complete all as specified and directed by Engr-in-Charge.

S&F vitreous china wash basin with full pedestal, white, flat back, size 550x400mm excluding taps, waste , chain and plug but including brackets size complete all as specified and directed by Engr-in-Charge. Make :-Cat No-CNS WHT 811 of Jaquar or S2040115 of Cera or V-1532/25 of Varamora

S & F stop valve 20 mm bore cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for pipe or for unions complete all as specified and directed by Engr-in-Charge.

S & F brass ball valve, for 20 mm pipe, high pressure with polythene float and fly nut complete screwd for pipe or brass ferrule complete all as specified and directed by Engr-in-Charge.

Cutting and screwing existing 20 mm size steel tubing for alterations or additions(or lengthening screw on pipe to form connector ) complete all as specified

M&L for rotational moulded polyethylene water storage tanks ( cylindrical verticl with closed top ) hoisted and fixed in position of 500 Ltrs complete all as specified and directed by Engr-in-Charge.

All as per Item No 102 here in before but 2000 Ltrs

M & L grating doom 100 mm dia with waste holes of PTMT complete all as specified and directed by Engr-in-Charge.

S&F brass chromium plated tubular towel rail ,20 mm dia,D type,60 cm long between flange complete all as specified and directed by Engr-in-Charge. Make :-Cat No-AQN-7711 of Jaquar or F-5004103 of Cera or MACR-4060 of Marc

S&F PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed by Engr-in-Charge. . Make: - Cera, Jaquar, Hindustan

S & F Fe-410W(Gde-E-250 quality-A) joist, channel, angle, or tee sections, fixed independently without connecting plates, etc (cut to ordinary lengths i.e. with in 20 mm of the length indicated complete all as specified and directed by Engr-in-Charge.

Mirror polishing on marble/granite/kora stone/stone work wherever required to give high gloss finish complete all as specified and directed by Engr-in-Charge.

Powdered coated aluminium(minimum thickness of powder coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required(fittings shall be paid for separately with extruded built up dtandard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners od required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mited and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, CP brass/stainless steel screws all complete all as specified and directed by Engr-in-Charge.

M & L powder coated aluminium frame for doors, windows and ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed by Engr-in-Charge.

M & L sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S&F Extruded brass handle, fabricated type polished , 150 mm long (ISI marked), complete all as specified and directed by Engr-in-Charge.

S&F 300mm long brass sliding door bolt with sand or di-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed by Engr-in-Charge.

S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed with 300 mm long bolt complete all as specified and directed by Engr-in-Charge.

M & L Anodized aluminium grill(anodised transparent or dyed or to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the window frame with CP brass/stainless steel screws@ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the openinmg, complete all as specified and directed by Engr-in-Charge.

Supply and Installation fo grease separator plant suitable for underground installation as per drawing attached at Appx. The Grease separator should be made from polythylene for longer life. The grease separator should have nominal capacity not less than 2170 Ltrs with Inlet/Outlet socket of nominal dia of minimum 150mm withgrease storage capacity of minimum 415 ltrand sludge storeage capacity of minimum 1005 Ltr. Total weight of grease seprator should be minimum 128 Kg with overalldimension of atleast 1340mm x 2828mm (Dia X Ht). The grease separator should be cabale of cleaning via shaft manhole cover, emptying via suction line nominal dia of minimum 65mm and nominal pressureof 10 kg with couplingfor two sided thread connection 75/75 mm for suction line, fire house quick coupling 75B and 2 1/2 n;aml ca[ amd counter flange with fire hose quick cupling 75 B and 2 1/2 black cap. Top cover of the grease separtor plant should be made from concrete frame with cast iron cover having clear opening of minimum 600 mm diameter. The cover should be odour freewhen closed. the wieght of the cover should be 145 Kg and manufactured to meet 1.50 ton load class requirement .( The rate shall be included for supply and installation, provide three days traning for operation/function and transportation at site)(Make and model No NS10 Grease Seprator Plant (Make: ACO Systems and Solution Pvt Ltd.) Thomson & Thomson (Ghatkoper west), Delux Idustries (Sakinaka), Nugreen Building Tech Pvt Ltd. (Rajouri Garden New Delhi). As per DIN En 4040 100 suitable for underground Installation) complete all as specified and directed by Engr-in-Charge.

Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge.

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavating over areas, n exc 1.5 m and not excceding 3.0 deep and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe and rendering, cutting out existing benching for and formaing branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by Engr-in-Charge.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC (1:4:8) complete all as specified and directed by Engr-in-Charge.

S&F PVC(SWR) pipes single sockets, in any length with rubber rings joints laid in trenches or in floors, 110mm dia complete all as specified and directed by Engr-in-Charge.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed by Engr-in-Charge.

Cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate) complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces or surface other than fair face of brickwork in CM (1:4) mixed with integral water proofing compound (water proofing compound shall be measured and paid separately) complete all as specified and directed by Engr-in-Charge.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM(1:4) complete all as specified and directed by Engr-in-Charge.

M&L Precast cement convrete type B1 (1:2:4) using 20mm graded aggregate set in CM (1:4) in cover slabe (for manholes etc) (Reinforcement shall be measured and paid for separately) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Charge.

M&L for prepartion of newly plastered surface of wall and apllying three coat of while wash complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) pipes with, sigle socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe as directed complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR)pipe with single socketed in any length with rubber ring joint fixed to wall and making good the mouth of rain water pipe as directed complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) junction singleas specified junction single (single T) equal or unequal fixed with solvent cement in any position as per site requirement complete all as specified and directed by Engr-in-Charge.

Removing exacavated material exe 250m but not exe 500m and deposing where directed

SCHEDULE 'A' PART-II (E/M Portion)

M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule including taking down complete all as specified and directed by Engr-in-Charge.

Description all as per serial item No.136 here-in-before but for one 6 Amps socket outlet on the Independent board complete all as specified and as directed by Engineer in charge

Description all as per serial item No.136 here-in-before but for one 6 Amps socket outlet on the same board complete all as specified and as directed by Engineer in charge

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule including taking down complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with PVC insulated and unsheathed cable 4.0 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 4.0 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified and directed by Engr-in-Charge.

M&L for switch piano, flush type, 5 Amps single pole, one way complete all as specified and directed by Engr-in-Charge.

M&L for Socket outlet 2 in 1 ,3 pin 6 Amps complete all as specified and directed by Engr-in-Charge.

M&L for switch socket combination 3 pin, flush type, 16 Amps complete all as specified and directed by Engr-in-Charge.

M&L for ceiling rose 3 phase /PVC/polycarbonate,isolated body complete all as specified and directed by Engr-in-Charge.

S&F Lamp Holder ,PVC /Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F steped type Electronic fan regulator flush type on the existing phenolic laminated sheet etc as rwquied complete all as specified and directed by Engr-in-Charge.

S&F in replacement Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface concealed PVC conduit, heavey duty and connected to main board and making good disturbed surface complete all as specified and directed by Engr-in-Charge. Note: Two runs each of 10.00 sqmm main cable and one RM of 10.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

S&F in replacement for Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface concealed PVC conduit, heavey duty and connected to main board and making good disturbed surface complete all as specified and directed by Engr-in-Charge. Note: Two runs each of 10.00 sqmm main cable and one RM of 10.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

S&F in replacement for Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface concealed PVC conduit, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 6.00 sqmm main cable and one RM of 6.00 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Supply and fix in repair LED lights fitting 1x 20WLED 6500K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy box type four feet with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED lights fitting 1 x 10 watt, 220V, AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy box type four feet with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair of LED street light fitting 30 Watt 6500K pf >.90 efficency 100lm/W 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp fixing of wall,pole,building with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection complete all as specified and as directed.

S&F in repair Street light bracket made out of 30/32 mm dia GI light grade tubing not less than .75 Mtr long bend to shape including pole clamps/fastners clips nails made out flat iron and nuts, bolts and washers etc complete all as specified and directed by Engr-in-Charge.

M&L Sheet metal enclosures for Tripple pole and earth enclosure with a three pin and earth plug with socket complete with tripple pole mcb 63 Amp 240 Volt including taking down complete all as specified and directed by Engr-in-Charge.

M&L Sheet metal enclosures for single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 32 Amp 240 Volt including taking down complete all as specified and directed by Engr-in-Charge.

M&L Sheet metal enclosures for DBs SPN 8 way flush mounted double door including accessories therein and disposing off includign taking down complete all as specified and directed by Engr-in-Charge.

M&L Sheet metal enclosures for DBs SPN 12 way flush mounted double door including accessories therein and disposing off including taking down complete all as specified and directed by Engr-in-Charge.

M&L MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.

M&L MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including takin down complete all as specified and as directed.

M&L MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and directed by Engr-in-Charge. .

M&L MCB TPN 40-100 Amps, 415 Volts, having breaking capacity 10 kA, 'C' characterstic including taking down complete all as specified and directed by Engr-in-Charge.

Supply and fixing steel iron exhaust fan of 300mm sweep with louvers, single phase 240 volts, 50 Hz including making hole alongwith civil work complete all as specified and as directed by Engineer in charge

Supply and fixing steel iron exhaust fan of 450mm sweep with louvers, single phase 240 volts, 50 Hz including making hole alongwith civil work complete all as specified and as directed by Engineer in charge

Supply and fixing of wall mounted fan 400 mm motor ,mounting Accossires kit blade ,guard set guard ring 1350RPM complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-Charge. .

Supply and fixing of Steel water tubing medium grade galvanised ( ISI marked) with all fittings( such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc) all as specified of following sizes:-

15mm dia

25mm dia

Supply and fixing of Gun metal globe PVC / gate valve from the pipe line and supply and fixing of gun metal globe gate valve (ISI) marked with iron wheel head, screwed both ends for iron pipe all as specified and as directed for the following sizes:- ( Make: Leader / BIR / Zoloto / TATA / KSB / Kartar / Kirloskar)

25mm dia

15mm dia

Supply and fixing of Angle Valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 35 watt to 36 watt (cool white), minimum system lumen efficacy not less than 100 lumper watt, CRI not less than80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver IP protection IP 20, powder coated housing with ashthetic bottom frame, suitable for any type of ceiling system including connection with PVC insulated copper conductor complete all as specified and directed by Engr-in-Charge.

Supply laying, connecting and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 70 sqmm 3.5 core laid in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

M & L for Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge.

M&LCommon burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed by Engr-in-Charge for cable protection.

S&F in repair VTPN Vertical three phase distribution board, VTPN, 8 way 440 volts having IP-54 isolated busbar assembly IK 09 Mechnical impact strength door earthing protection, double door with provision for fixing of MCCBs as incomer up to 160 Amps and MCBs as outgoing complete all as specified and directed by Engr-in-Charge. .(Make: Indoasian or its equivalent/legrand /CG )

Supply and fix in repairs of MCCB 4P 160 Amps /415Volts ,having breaking capacity with Complete accessories as per existing suitable size complete all as specified and as directed

S&F in repair Sheet metal enclosures for single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 32 Amp 240 Volt complete all as specified and directed by Engr-in-Charge.

Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using copper earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.

Supply and fixing of Earth continuity conductor or main4 mm Galvanised iron wire fixed to wall on batten or recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc complete all as specified and directed by Engr-in-Charge.

Cutting of road (in hard/ dense soil) for laying pipe line or repair to pipes of any size upto 0.50 mtr. depth and getting out including forming bottom surface to required level and making good the road/wall as per existing bitumens, concrete complete all as specified and directed by Engineer-in-Charge

M&L in reapir of GI tube light grade of bore 40 mm with all fittings and fixed complete to walls and ceiling or laid in floor for cable crossing including cutting of bitumen roads/PCC and making good after laying of cable up to building height complete all as specified and directed by Engr-in-Charge.

Taking out of the split type AC and refixing of New location /Existing location including servicing Testing/commissioning etc complete all as specified and directed by Engr-in-Charge.

Taking out of existing Ceiling fan and refixing at the same location along with minor repair work such as painting /Writing of MES NO/03 core flexibe PVC insulated and PVC sheathed copper cord from ceiling rose to ceiling fan etc complete all as specified and directed by Engr-in-Charge.

Taking out the existing Geyser assy and refixing with the hole fastner of suitable size including minor repair such as painting /writing of MES NO/PVC steel connecting pipe etc complete complete all as specified and directed by Engr-in-Charge.

ANIKET TRADERS

SHIVAE CONSTRUCTION

DAVINDER SINGH

V K CONSTRUCTION CO