CERTAIN REPAIR TO FENCING, DRAIN, PATH AND COMPOUND WALL ETC IN THE AREA OF AGE BR-I UNDER GE (EAST) LUCKNOW. (3rd CALL)

Amount

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this schedule complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L, 20 mm thick granite (of any type and colour) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite complete all as specified and directed.

S&F laminated/glossy finished chequered cement tiles exterior grade superior quality of size 400mmx400mmx25mm thick (minimum) of approved design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4 , complete all as specified and directed.

S&F exterior ceramic tiles superior qulaity of size 300mmx300mm x 10-12mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4,complete all as specified and directed.

S&F in repair glossy finish 60 thick M-35 grade ISI Marked, Machine pressed concrete rubber moulded interlocking coloured paver block of any shape and size and colour with grey cement and pigment over including 25 mm thick sand cushion complete all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in flooring, sub base complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant primer complete all as specified and directed.

S&F glass dividing strips 3mm thick and 38mm wide & fixed in position complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 , 75 mm thick as in plinth protection and flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or wall complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber rings joints laid in trenches or in floor/wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S&F framed work as in doors or gates of cattle trap of angle or other section with gussset plates, rails, braces etc complete drilled for fixing steel sheetings or other coverings. Doors etc to be prepared for hanging or sliding with and including either hooks or hinges steel hanging door fittings ( exclusive of steel sheeting or other coverings running rails and guides) and hanging also fastening and fixing complete quality conforming to Fe-290 Gde E-165) quality B complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

M&L for mild steel work as in hold fasts, bands, plain angle cleats, clamps, hooks, straps, stay for rain water pipe, pintle hinge, large hasp and staple, clamps conforming to Fe 290 or Fe 310-0 complete all as specified and directed.

M&L mild steel TMT bar 8 mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed ) not less than 0.9 dia off confirming to grade Fe 310 complete all as specified and directed.

Demolition of reinforced cement concrete works of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1using 20mm graded stone aggregate as in cover slab of main holes, drain and similar article with set in cement mortar 1:4 complete all as specified and directed.

M&L providing cement concrete , Type B0 1:2:4 (12.5 mm graded aggregate ) in roof kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed.

Supply only liquid water proofing compound, ISI Marked complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc. or for shafts, well, cesspits, manholes, peir holes, etc. Not exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) of any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in posts etc complete all as specified and directed.

M&L MS work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riverting etc and similar work confirming to Fe 290Gde E-165 complete all as specified and directed.

Supply chain link MS galvanised fencing any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and directed.

Supply only mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed at other fitted with washer and nut 5 to 10 mm dia and 50cm long complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossing with and provision of galvanised mild steels wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed.

M&L PCC 1:2:4 using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters over 1.5m span etc complete all as specified and directed.

Formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc complete all as specified and directed.

Removing excavated material exc 250 m but n exc 500 m distance and depositing as directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Returning filling including spreading ,levelling,watering and well ramming in layers not exc 25 cm soft/ loose soil complete all as specified and directed.

M/s R.K.Traders

M/S S S A ASSOCIATES

QUALITY CONSTRUCTIONS CO

Matrubhoomi Construction

Abode Artisan Enterprises