New Construction of 18 bays bus stand at village Siwah, Distt. Panipat (Pdg. Sub Station only). Recall

Amount

HSR 6.6 Earth work in excavation in foundations, trenches, etc in all kinds of soil not exceeding 2.0 mtr. Each depth including dressing of bottom and sides of trenches stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with cmpaction, including desposal of all suppplies soils as directed with in a lead of 30 mts

HSR 10.26 Cement concrete 1:8:16 with brick ballast 40 mm nominal size in foundation and plinth

HSR 10.41 Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth

HSR 11.2 first class brick work laid in cement sand mortar 1:6 in foundation and plinth

HSR 11.1 Brick ending 6.83 cm wide 11.43 cm deep to plinth protection with 1st class brick including grouting with cement sand mortar 1:4

HSR 11.47 11:43 cms thick bricks wall laid in cement sand mortar1:4 without rain forcement, in foundation and plinth

14.1 conglometer floor 50 mm thick CC topping 1:2:4

15.7 12 mm thic cement plaster 1:6

18.21 Steel rain forcement mild Steel rain forcement for RCC Works where not included in the complete rate of RCC including bending and placing in possision complete

31.21 (xiv) Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed.

31.21 (xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 120 mm dia.

31.22 (i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22 (ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22 (iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.

31.22 (iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired.

31.22 (v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

31.22 (x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

31.22 (xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

31.22 (xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

31.22 (xiv) Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

31.22 (xv) Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.

31.23 Lightning conductor (a)Copper. Supply and erection of copper tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with suitable copper stapples of same size.

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refiling of trenches. 31.25 (xxx) Ard. 120 Sq. mm 3.5 Core Cable .

31.25 (xxxii) Ard. 185 Sq. mm 3.5 Core Cable .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 31.26 (xxx) Ard. 120 Sq. mm 3.5 Core Cable .

31.26 (xxxii) Ard. 185 Sq. mm 3.5 Core Cable .

31.28 Supply and erection of suitable compression type brass cable glands for underground Cable. 120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core

240 Sqmm Cable 3 to 3.5 Core .

31.30 Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. burried 2.20 m in ground.

31.35 (iii) Supply and erection of caution notice plate in three languages.

31.35 (iv) Supply and erection of shock restoration chart in glass frame

31.67 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work HDPE pipe 145 / 123mm outer dia / inner dia.

31.71 S/E of XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm 3 core XLPE Cable

Supply & erection ACSR Conductor ( ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as of various sizes a swell as jointing and binding with insulator at support complete in all respect up to entire satrisfaction of Engineer in charge of te work ACSR Conductor 50 sqmm

ACSR Conductor 20 sqmm

Supply and erection of MS Channel 100x50x6mm including cutting bending to the required shape drilling hole carriage painting loading unloading complete in all respect upto the entire satisfaction of encineer in charge

Supply , stringing and sagging of GSL wire 8 SWG complete in all respect with erection of the same upto the entire satisfaction of encineer in charge

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage painting loading unloading complete in all respect upto the entire satisfaction of encineer in charge

Providing and fixing of Nut & Bolt of size as per ISI specification of Engineer-in-charge.

Supply and erection of Shackle insulator as per State Electricity Nigam specification upto the entire satisfaction of Engineer-in-Charge.

Supply & erection of 11KV GI pin insulator Rashtriya / Jayshree / BHEL make with pin with all labour and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works.

Supply of MS D-strip type-I made out of MS flat of size 40x6mm suitable for LT insulator 90x75mm with latest amendments complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work excluding cost of Nuts & bolts.

Supply & erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

The cubical panel will be completed in all respect including inter connection, internal wiring with PVC copper cable, its testing and approval of all item by UHBVNL cost of all testing/ approval charges or all items of UHBVNL with a guarantee of one year from the date of commissioning. including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work

Supply & Erection of bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand with one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work. Stand made out of GI pipe 32mm dia.

Supply & Erection of rubber mat of size 1Mx2 M X 12mm thick suitable for 11 KV ISI marked complete in all respect upto the entire satisfaction of the engineer In-charge of the work. Make & Model as approved by Chief Electrical Inspecter Haryana.

Supply & erection of fire extinguisher ISI marked Co 2 type 4.5 Kg. Capacity as Per ISI 7285 duly erected on wall with hook including the cost of hook, screw etc. with all the labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer In charge of the work. Make: Ajay, Zenith, Minimax.

Supply & Erection of fire buckets of 9 ltr. capacity made out of 24guage G.l sheet and duly painted with one coat of red oxide and 2 coats of approved paint in red colour and written with the fire' as per fire protection necessar sand filling in the bucket hung the bucket on stand with all labour and material required to complete the job all respect up to entire \satisfaction of the Engineer m charge of the work

Providing and fixing of wire mesh jali around the transformer of size 4’ x 8’ made out of 75x25x3.25mm jali fixed with angle iron frame made out of M.S Angle 50 x 50 x 6 mm support of M.S flat 50 x 6mm and fixed in C.C block 1:2:4 including cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer in charge

Supply and erection of heat shrinkage type end termination jointing kit outdoor type of Suitable for 16 to 50 sqmm 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect.

Supply and erection of heat shrinkage type end termination jointing kit indoor type of Suitable for 16 to 50 sqmm 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect.

Supply & erection of lighting arrestor model ALPRO / Alastom/ LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resistar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply of Disc insulator Rashtriya / Jayshree / BHEL make with Disc fitting T&C type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work

Supply and erections of V-shape X-arm on PCC poles as per state electricity Nigam design and requirement it should be made out of MS channel size 75 x 40 x 6mm complete in all respect .

Providing & fixing of stay set complete with stay wire and egg insulator as per specification upto the entire satisfaction of Engineer-in-Charge for HT/LT line.

Supply and erection of guards made of G.I. wire 8 SWG with guard real for HT/LT line complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage painting loading unloading complete in all respect upto the entire satisfaction of engineer in charge

S/E of 11 KV danger plate 8” x 6” duly painted with enamel paint

Supply & Erection of Digital Electronic Meter 3 phase 4 wires 0.5 accuracy for recording reading in KWH of make and rating approved by UHBVNL with push button display operating system for different kind of readings.F57 including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work.

Supply and erections of 11 KV Protection CT and PT with latest amendments complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Gas Based hooter system

Som Nath Contractor